SparkFun
Refine Search
POWER
ELECTRONIC COMPONENTS
SENSORS
MOTORS / CONTROLLERS
LED
TOOLS & INSTRUMENTS
★ ARDUINO
★ MICRO:BIT
- Flux Type: No-Clean Liquid Flux (for leaded and lead-free applications)
- Flux Classification: INM0
- Packaging: 10ml Pen
- Included 1x Extra Pen Nib
RM16.70
RM33.40
- Walk-In Price: RM60
- Warranty: 12 Months (T&C Apply)
- Ink Resistance: 2-10 Ohms/cm
- Line Width: 0.4mm
- Squeeze-Free Pen
RM24.96
RM41.60
- Walk-In Price: RM10.9
- Warranty: 12 Months (T&C Apply)
- This is a coin cell holder for the common CR2032 type battery.
- The holder has a neat pop-in, pop-out feature that makes changing the battery easy.
- The feet of the holder have a small hole that allow it to be sewn without modification.
RM1.92
RM6.40
- Walk-In Price: RM32.5
- Warranty: 12 Months (T&C Apply)
- Material : 12UM Stainless steel fiber
- Gram Weight:0.2458g/m
- Strength:2.8KGF
RM25.40
- Walk-In Price: RM62.5
- Warranty: 12 Months (T&C Apply)
- Sensor is flexed, the resistance across the sensor increases
- Resistance of the flex sensor changes when the metal pads are on the outside of the bend (text on inside of bend)
- Connector is 0.1" spaced and bread board friendly
RM47.90
- Walk-In Price: RM14
- Warranty: 12 Months (T&C Apply)
- Hobby Motor now with a 6mm, 10 tooth, gear to make your basic projects a little simpler to manage.
- It works well for basic things like making a fan or spinning something pretty fast without much resistance.
- Operating voltage range of 1.0 to 3.0VDC.
- Can handle a max load of up to 12VDC and a no load speed of 6600±10% RPM (@1.0V DC, 110mA).
RM10.50
- Walk-In Price: RM9.5
- Warranty: 12 Months (T&C Apply)
- This is the MyoWare Proto Shield, a simple proto-board for your MyoWare Muscle Sensor.
- With this shield you will be able to use the area provided to solder on whatever custom circuitry you can come up with.
- This shield provides 8 x 15 solderable through holes on a standard 0.1" grid.
- The MyoWare Proto Shield is equipped with two rows of 3-pin plated through holes on each end of the board.
- This allows for standard 0.1" headers to be used to stack the shield with other MyoWare boards.
RM1.30
RM2.60
- Walk-In Price: RM60
- Warranty: 12 Months (T&C Apply)
- Load measurement: up to 30 Amps
- Perfect for building your own energy monitor
- Keep your power usage down
- Building an over-current protection device for an AC load
RM13.68
RM45.60
- Walk-In Price: RM164
- Warranty: 12 Months (T&C Apply)
- Velcro Finger Strap
- Transparent Stickers to Protect Sensor
- 0.625" Diameter and 0.125" Thick
RM37.20
RM124.00
- Walk-In Price: RM32.9
- Warranty: 12 Months (T&C Apply)
- 1/4 Watt Resistor Spacing: 0.4"-1.5"
- 1/2 Watt Resistor Spacing: 0.5"-1.5"
- Made from high impact ABS Plastic
RM16.62
RM27.70
- Walk-In Price: RM255
- Warranty: 12 Months (T&C Apply)
- 32x32 RGB LED
- 3.3-5V supply for power
- 15" pitch 4-pin polarized connector power cable
RM64.86
RM216.20
- Walk-In Price: RM39
- Warranty: 12 Months (T&C Apply)
- 24 inch long
- 3.5mm audio jack connector
- Each cable comes in a red/blue/black set.
RM30.40
- Walk-In Price: RM104
- Warranty: 12 Months (T&C Apply)
- Great way to induce linear motion for pushing, pulling or controlling switches and levers.
- Solenoid is rated for 36V but they work like a charm at 12V.
- Solenoids are great for all kinds of motion applications.
RM39.20
RM78.40
- Walk-In Price: RM30.5
- Warranty: 12 Months (T&C Apply)
- SparkFun Ambient Light Sensor Breakout
- Basic breakout board - TEMT6000
- Greater the incoming light, the higher the analog voltage on the signal pin
RM18.70
- Walk-In Price: RM95
- Warranty: 12 Months (T&C Apply)
- ATmega328P microcontroller with Optiboot (UNO) Bootloader
- CH340C USB to Serial IC
- Reinforced and reversible USB C connector
- Built-in Qwiic connection
- Input voltage: 7-15V
RM34.00
RM68.00
- Walk-In Price: RM43
- Warranty: 12 Months (T&C Apply)
- Uses the I2C interface
- 12-bit, 0.0625°C resolution
- Typical temperature accuracy of ±0.5°C
RM6.85
RM13.70
- Walk-In Price: RM43
- Warranty: 12 Months (T&C Apply)
- Each breakout comes fully assembled and works from 2.7V up to 5.5V
- The Electret Mic Breakout translates amplitude (not volume) by capturing sound waves between two conducting plates in the microphone and converting them into electrical waves
- Electrical signals are then amplified and picked up by your microcontroller’s ADC
RM21.60
- Walk-In Price: RM60
- Warranty: 12 Months (T&C Apply)
- Complete with the full UART hardware handshake feature
- The pin-out matches the FTDI cable to work with official Arduino and cloned Arduino boards
- Can also be used for general serial applications
- Brings out the DTR pin as opposed to the RTS pin of the FTDI cable
- The DTR pin allows an Arduino target to auto-reset
RM16.95
RM33.90
- Walk-In Price: RM80
- Warranty: 12 Months (T&C Apply)
- Newest revision of our FTDI Basic
- SMD 6-pin header
- Configured to either 3.3V or 5V
- Auto-reset
- TX and RX LEDs that make it a bit better to use over
RM23.10
RM46.20
- Walk-In Price: RM92.50
- Warranty: 12 Months (T&C Apply)
- Operating Voltage: 2.3-5.5v
- Compensated humidity range: 10-90% RH
- Compensated temp. range 5-50°C
- True temperature-compensated digital I2C output
- Wide operating temperature range allows for use in many applications
RM13.15
RM26.30
- Walk-In Price: RM200
- Warranty: 12 Months (T&C Apply)
- ATMega328 w/ 8MHz STK500 (Arduino) bootloader
- MLX90614 IR sensor, 3V version
- Power and status LEDs
RM195.00
- Walk-In Price: RM26.5
- Warranty: 12 Months (T&C Apply)
- Dual bidirectional voltage-level translator
- I2C-bus
- SMBus voltage-level translator operational: 1.0 V to 3.6 V
RM23.50
- Warranty: 12 Months (T&C Apply)
- The SparkFun Load Cell Amplifier is a small breakout board for the HX711 IC that allows you to easily read load cells to measure weight.
- By connecting the amplifier to your microcontroller you will be able to read the changes in the resistance of the load cell, and with some calibration you’ll be able to get very accurate weight measurements.
- This can be handy for creating your own industrial scale, process control or simple presence detection.
RM55.00
- Warranty: 12 Months (T&C Apply)
- Steps down 5V signals to 3.3V AND steps up 3.3V to 5V at the same time.
- Each level converter has the capability of converting 4 pins on the high side
RM3.90
RM13.00
- Walk-In Price: RM45.5
- Warranty: 12 Months (T&C Apply)
- Expands the capabilities of the development platform by providing access to more pins and allowing for connections to the I2C and SPI buses.
- Connect the micro:bit to breadboards and other sensors, motors, LEDs and more
- With the micro:bit breakout we have broken out all 21 GPIO pins, power and ground to a pre-soldered 0.1" header.
- Able to unlock the full potential of your micro:bit
RM11.45
RM22.90
- Walk-In Price: RM17
- Warranty: 12 Months (T&C Apply)
- Simple board
- Breaks out a micro-B USB connector’s VCC, GND, ID, D- and D+ pins to a 0.1" pitch header
- 0.8 x 0.45" (20.3 x 11.4mm)
RM4.20
RM8.40
- Walk-In Price: RM60.00
- Warranty: 12 Months (T&C Apply)
- Equips Arduino with mass-storage capability
- Communication with microSD cards is achieved over an SPI interface
- Populated with a microSD socket, red power indicator LED, and a reset button
RM21.25
RM42.50
- Walk-In Price: RM25.5
- Warranty: 12 Months (T&C Apply)
- The on-board trim pot sets the signal level between the stages, not the feedback path
- The bandwidth is set to 15.9kHz by a pair of feedback capacitors, or over 100kHz with the caps removed
- The LMV358 opamp can source up to 160mA and works well as a low impedance driver/buffer
RM4.20
RM14.00
- Walk-In Price: RM28.00
- Warranty: 12 Months (T&C Apply)
- 4x Qwiic Connection Ports
- Select GPIO Pins Broken Out
- Pi Tin Compatibility
RM9.80
RM19.60
- Walk-In Price: RM64.50
- Warranty: 12 Months (T&C Apply)
- Is a small and very easy to use audio sensing board with three different outputs
- Not only provides an audio output, but also a binary indication of the presence of sound, and an analog representation of its amplitude
- The 3 outputs are simultaneous and independent
- The envelope output allows you to easily read amplitude of sound by simply measuring the analog voltage
RM49.50