Other Accessories
FREE SHIPPING to Peninsular Malaysia for orders over RM39.00
Other Accessories
Other Accessories
Sort by
Show result
  • No backlight, keeps displaying last content for a long time even when power down
  • Ultra low power consumption, basically power is only required for refreshing
  • Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano
RM79.00
  • No backlight, keeps displaying last content for a long time even when power down
  • Ultra low power consumption, basically power is only required for refreshing
  • Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano
RM94.50
  • Product Name : IDC Socket Connector;
  • Pin/Position Number : 20
  • Row Number : Double Row;
  • Pitch : 2.54mm
  • Match With Raspberry Pi Zero
  • Material : Plastic, Metal;
  • Weight : 37g
RM0.60
  • Operating voltage: 3.3V

  • Interface: 3-wire SPI, 4-wire SPI

  • Dot pitch: 0.138 × 0.138

  • Resolution: 200 × 200

  • Display color: Black & White

RM39.00
  • Low Profile
  • Active cooling
  • Power Management IC & Controller
  • Power Supply: from 5V pin of LCD PCB
  • Fan: No speed control (Always on)
RM14.50
  • 4 USB Ports, compatible with USB2.0/1.1
  • Onboard USB to UART, with enable / disable switch, convenient for Raspberry Pi serial debugging and avoiding conflict
  • Onboard multi indicators, for monitoring the status of power, USB to UART, and each USB port
RM38.50
  • Raspberry Pi connectivity, compatible with Raspberry Pi Zero/Zero W/Zero WH/2B/3B/3B+
  • Supports dial-up, telephone call, SMS, MMS, mail, TCP, UDP, DTMF, HTTP, FTP, etc.
  • Supports GPS, BeiDou, Glonass, LBS base station positioning
RM299.00
  • Model: LD3007MS 
  • Pi-Fan,  For Raspberry Pi Cooling
  • Good airflow & Low noise
  • Rated Voltage: 5V
  • Rated Current: 0.2A±10%​
RM8.00
  • Capability to control 16 Servos with perfect timing
  • Can do PWM up to 1.6 KHz with 12 bit precision, all completely free-running
  • Adafruit 16-Channel 12-bit PWM/Servo HAT will drive up to 16 servos or PWM outputs over I2C with only 2 pins
  • On-board PWM controller will drive all 16 channels simultaneously with no additional Raspberry Pi processing overhead
  • Can stack up to 62 of them to control up to 992 servos - all with the same 2 pins
RM99.00
  • Can break out all those tasty power, GPIO, I2C and SPI pins from the 26 pin header
  • Make "cobbling together" prototypes with the Pi super easy
  • Designed for use with Raspberry Pi 1 Model B AND Model A, both revisions
RM22.40
RM32.00
  • 12 capacitive touch sensors
  • Capacitive touch sensing works by detecting when a person (or animal) has touched one of the sensor electrodes
  • The HAT has 12 'figure 8' holes in it that can be gripped onto with alligator clip cables
RM85.00
  • Adafruit DC & Stepper Motor HAT for Raspberry Pi
  • Perfect for any motion project
  • Dimensions w/ components: 65mm x 56mm x 13mm

RM129.00
  • PCB Dimensions: 65mm x 57mm x 2mm / 2.6" x 2.2" x 0.08"
  • Height (with barrel input): 13mm / 0.5"
  • Weight: 15g
RM139.00
  • -165 dBm sensitivity, 10 Hz updates, 66 channels
  • 5V friendly design and only 20mA current draw
  • Breadboard friendly + two mounting holes
  • RTC battery-compatible
RM235.00
  • -165 dBm sensitivity, 10 Hz updates, 66 channels
  • Only 20mA current draw
  • Built in Real Time Clock (RTC) - slot in a CR1220 backup battery for 7-years or more of timekeeping even if the Raspberry Pi is off!
RM224.10
RM249.00
  • Compatible with Arduino UNO, Leonardo, easy to connect with various Arduino shields
  • XBee connector for connecting various XBee modules
  • Sensor interface for connecting various sensors
  • Onboard USB TO UART for serial port debugging, also can be configured as XBee USB adapter
RM85.00
  • INTERNAL LOW-DRIFT VOLTAGE REFERENCE
  • INTERNAL OSCILLATOR
  • INTERNAL PGA
RM59.00
  • High-quality audio output
  • Extensive tutorials and easy startup experience
  • Powerful Python and C++ libraries so you can include sensors in your project
  • User-programmable RGB LED and multifunction button
  • Prototyping area with GPIO breakout to add additional sensors or buttons
RM285.00
  • High Quality armor case for Raspberry Pi 3B+/3B
  • Armor case is made of Aluminum Alloy with CNC machining manufacturing technology
  • Dual fan and thermal tapes which reduce the temperature for Raspberry Pi board
RM65.00
  • 800% higher heat radiation efficiency than Copper/Aluminum heat sink
  • Ultra slim, ultra light & Simple installation
  • Perfectly matched to Raspberry PI 3 and PI 2 board
  • There is Adhesive on the back
  • Keep your Pi cool while working
RM5.20
RM6.50
  • JTAG is available in the uSD connector
  • Access via breakout board, but this requires breakout board
  • Hold the CPU immediately
  • Export JTAG / UART from SD card pins on Allwinner chip
  • Used with cubieboard to export JTAG
RM7.20
RM12.00
  • Highly cost-effective multimedia hat compatible with the Raspberry Pi
  • High-definition clear sound quality
  • Solving the poor quality problem with Raspberry Pi integrated sound card
RM164.50
RM235.00
  • Compatible with Raspberry Pi A+, B+, 2B, 3B and 3B+
  • Also works with Raspberry Pi Zero, Zero Wireless and all other Raspberry Pis with 40 GPIO pins (or compatible boards).
  • 3D tracking
  • Gesture sensing up to 15cm
  • Touch and Tap sensing
RM87.50
RM125.00
  • Compatible with Raspberry Pi A+, B+, 2B, 3B and 3B+
  • Also works with Raspberry Pi Zero, Zero Wireless and all other Raspberry Pis with 40 GPIO pins (or compatible boards).
  • 3D tracking
  • Gesture sensing up to 15cm
  • Touch and Tap sensing
RM118.30
RM169.00
  • Consumer Electronics

  • Imaging, Video & Vision

  • Medical

  • RF Communications

  • Wireless

RM30.00
RM60.00
RM30.00
  • GPIO Port Pin Identification
  • Material: PCB Gold Plating
  • With mounting holes
RM6.50
  • Operating Voltage: 2.8V ~ 5.5V
  • Input Signal: High Level (≥2.8V); Low Level (≤0.5V)
  • Max Switching Current: 10A
  • Max Switching Voltage: 35VAC; 30VDC
  • Rating Load: 10A@35VAC; 10A@28VDC
RM25.00
  • GrovePi+ HAT which is compatible with most of Raspberry Pi main board: A+, B, 2 B+, 3 B+.

  • Easy to setup and interface, plug and use connections.

  • Includes various type of sensor and output Grove modules

RM539.90
  • Output voltage: 5V
  • Applicable battery: 3.7V 14500 lithium battery (4.2V when full charged)
RM74.90