Search result
- Raspberry Pi High Quality Camera
- Sony IMX477R stacked, back-illuminated sensor
- 12.3 megapixels
RM239.00
- Resolution: 10 MegaPixel
- Focal length: 16mm
- C Mount
RM239.00
- Resolution: 3 MegaPixel
- Focal length: 6mm
- CS Mount
RM119.00
- ATmega2560 microcontroller
- Input voltage - 7-12V
- 54 Digital I/O Pins (14 PWM outputs)
- 16 Analog Inputs
- 256k Flash Memory
- 16Mhz Clock Speed
RM179.00
- ATmega328P Chip
- 14 digital input/output pins
- 6 analog inputs
- 16 MHz quartz crystal
RM105.00
- High-performance 64-bit quad-core processor
- Dual-display support at resolutions up to 4K
- Hardware video decode at up to 4Kp60
- 2GB of RAM
- Dual-band 2.4/5.0 GHz wireless LAN & Bluetooth 5.0
- Gigabit Ethernet, USB 3.0
- PoE capability (via a separate PoE HAT add-on)
RM174.00
- High-performance 64-bit quad-core processor
- Dual-display support at resolutions up to 4K
- Hardware video decode at up to 4Kp60
- 4GB of RAM
- Dual-band 2.4/5.0 GHz wireless LAN & Bluetooth 5.0
- Gigabit Ethernet, USB 3.0
- PoE capability (via a separate PoE HAT add-on)
RM239.00
- High-performance 64-bit quad-core processor
- Dual-display support at resolutions up to 4K
- Hardware video decode at up to 4Kp60
- 8GB of RAM
- Dual-band 2.4/5.0 GHz wireless LAN & Bluetooth 5.0
- Gigabit Ethernet, USB 3.0
- PoE capability (via a separate PoE HAT add-on)
RM349.00
- Wide power input range from 3 to 8 volts
- Low noise LDO regulator
- LED power indication
- Integrate 10 dof sensors
- Compact size design and easy-to-use
- Compatible with Arduino controllers
RM165.00
- Camera: 5 million pixels
- Photosensitive Module: OV5647
- Camera Parameters:
- CCD size: 1/4 inches
- Aperture (f): 1.8
- Focal Length: 3.6MM (adjustable)
RM199.00
- 800x480 hardware resolution
- Capacitive touch control
- Supports popular mini PCs such as Raspberry Pi, BB Black, as well as general desktop computers
- When works with Raspberry Pi, supports Raspbian/Ubuntu/Kali/Retropie/WIN10 IOT, driver free
RM216.00
- Atmel SAM3X8E ARM Cortex-M3 CPU
- 32-bit ARM core microcontroller
- 54 digital input/output pins
RM179.00
- Microcontroller: SAMD21 Cortex-M0+ 32bit Low Power ARM MCU
- Board Power Supply (USB/VIN): 5V
- Supported Battery(*): Li-Po Single Cell, 3.7V, 700mAh Minimum
- Circuit Operating Voltage: 3.3V
- Digital I/O Pins: 8
RM179.00
- A practical and cost effective solution for makers seeking to add Wi-Fi connectivity
- The ATSAMW25 is composed of three main blocks
- The ATSAMW25 includes also a single 1x1 stream PCB Antenna
- The design includes a Li-Po charging circuit
- The MKR1000 Wifi module supports certificate SHA-256.
RM205.00
- 2 channel DC motor driver
- Solder prototyping areas
- Standard Servo stocket
- Mounting holes compatible with Arduino UNO,Mega,Romeo
- Incorporates dual H-bridge for bi-directional motor control (digital pins 4,5,6,7 suggest)
- Easy connection to Xbee,DFRobot Bluetooth and APC220 wireless modules
- 7 white LEDs around the board for effect
- Assembled size:225*174*112
RM250.00
- Rotation angle range: 170°
- Stall torque:19.3kg.cm(7.4v)
- Dynamic torque:15.1kg.cm(7.4v)
- Teeth: 25
- Working Voltage: 5-7.4v
- Stall current:3A(@8.5V - Limit test)
- PPM Voltage:3V-5V
- PPM Resolution:2us
RM135.00
- Module Power : 5.00V
- Measuring Range :0-14PH
- Measuring Temperature :0-60 ℃
- Accuracy : ± 0.1pH (25 ℃)
- Response Time : ≤ 1min
- Industry pH Electrode with BNC Connector
- Gain Adjustment Potentiometer
- Power Indicator LED
RM325.00
- Build a wall avoidance robot
- Build a line follower robot
- Play some musical tones
RM479.00
- Build a wall avoidance robot
- Build a line follower robot
- Play some musical tones
RM479.00
- 7” Touchscreen Display.
- Screen Dimensions: 194mm x 110mm x 20mm (including standoffs)
- Viewable screen size: 155mm x 86mm
- 70 degree viewing angle
- Screen Resolution 800 x 480 pixels @ 60fps
- 24-bit color
- 10 finger capacitive touch.
- Connects to the Raspberry Pi board using a ribbon cable connected to the DSI port.
RM292.00
- Robot vision made easy - press the button to teach Pixy2 an object.
- New with Pixy2: line following mode and integrated LED light source!
- Simplify your programming - receive just the objects you're interested in.
RM169.00
- 4WD Arduino mobile robot development platform
- 4 high-quality micro-speed motor
- Complete chassis with mounting hardware
- Variety of sensors can be added
RM220.50
RM245.00
- Smaller, faster and more capable than the original Pixy
- Can learn to detect objects that you teach it, just by pressing a button
- New algorithms that detect and track lines for use with line-following robots
- No need to futz around with tiny wires
- Several interfaces including SPI, I2C, UART, and USB with simple communications
- Color-based filtering algorithm to detect objects
RM299.00
- Quad Core 1.2GHz Broadcom BCM2837 64bit CPU
- 1GB RAM
- BCM43143 WiFi and Bluetooth Low Energy (BLE) on board
- 40-pin Extended GPIO
- 4x USB 2 ports
- 4 Pole stereo output and composite video port
- Full size HDMI
- CSI camera port for connecting a Raspberry Pi camera
RM155.00
- 1.4GHz 64-bit quad-core ARM Cortex-A53 CPU
- Gigabit Ethernet (over USB)
- Dual-band WiFi and Bluetooth
- Power-over-Ethernet (PoE) pins
- Improved PXE and USB booting
- Improved thermal management
RM156.00
- Touch Screen Type: Resistive screen
- Touch Screen interface: SPI pins from the 40-pin GPIO
- High resolution: 800 x 480
- Voltage/Current: DC 5V/1A
RM179.00
- Chip type: Sony IMX219
- Resolution for image: 3280x2464
- Resolution for video: 1080p30, 720p60 and 640x480p90
- Length of ribbon cable: 147mm
- Fixed focus lens on-board
RM115.00
- Fixed focus lens on-board
- 8 megapixel native resolution sensor-capable of 3280 x 2464 pixel static images
- Supports 1080p30, 720p60 and 640x480p90 video
- Connects to the Raspberry Pi board via a short ribbon cable (included)
- Supported OS: Raspbian (latest version recommended)
RM115.00
- NET Gadgeteer Compatible
- Single supply voltage 3.4V - 4.5V
- SIM900 quad-band: GSM 850,EGSM 900, DCS 1800, PCS 1900.
- Searching the 4 frequency bands automatically.
- Class 4 (2W) at GSM 850 and EGSM 900
- Class 1 (1W) at DCS 1800 and PCS 1900
- GPRS multi-slot class 10 (default)
- Support Single Antenna Interference Cancellation
RM175.00
RM250.00
- 1.4GHz 64-bit quad-core ARM Cortex-A53 CPU
- Gigabit Ethernet (over USB)
- Dual-band WiFi and Bluetooth
- Power-over-Ethernet (PoE) pins
- Improved PXE and USB booting
- Improved thermal management
RM179.00
RM186.00