Search - 0-49.99
FREE SHIPPING to Peninsular Malaysia for orders over RM39.00
Search result
Sort by
Show result
  • High quality 18650 battery
  • Typical capacity of 3350mAh
  • Rechargeable Li-Ion Battery (without Protection IC)
  • Single cell voltage and High capacity
RM29.90
  • Glass Fuse (Glass Body, Nickel Plated Cap)
  • 0.5A / 250V
  • Diameter: 5 x 20 mm
RM0.25
  • Radial Leaded Power Inductor
  • Inductance: 330uH
  • Max Current: 0.5A
  • Package: 8 x 10mm
RM1.00
  • Input voltage : 3 to 35V DC ( Note : Onboard Voltmeter no display when input voltage less than 4V )
  • Input current : 9A (max)
  • Output voltage : 3.5 ~ 35V DC ( Output voltage > = Input voltage)
  • Output current : 6A (max)
  • Conversion efficiency : 96% ( Highest )
  • Output ripple : 40mV (TYP)
  • Onboard voltmeter range : 4 ~ 40V ; Tolerance : +/-0.1V
  • Dimension : 6.75 x 4.15 x 1.4 cm
RM27.90
  • 10W High Power Integrated LED
  • Colour : White
  • Brightness : 900-1000LM
  • Working Voltage : 9V-12V DC
  • Current : 0.9A
RM8.00
  • Glass Fuse (Glass Body, Nickel Plated Cap)
  • 15A / 250V
  • Diameter: 5 x 20 mm
RM0.25
  • 1W High Power Integrated LED
  • Colour : White
  • Brightness : 80-90LM
  • Forward Voltage : 3.15V-3.4V DC
  • Forward Current : 0.35A
RM1.00
  • 1W High Power Plant Growing LED
  • Spectrum : 400-840nm 
  • Brightness : 100-110LM
  • Forward Voltage : 3.2V-3.4V DC
  • Forward Current : 0.35A
RM2.00
  • Terminal: SPST

  • Rating: 3.0A / 250V

  • Mounting Hole: 12mm

RM4.50
  • Terminal: SPST

  • Rating: 3.0A / 250V

  • Mounting Hole: 12mm

RM4.50
  • Terminal: SPST

  • Rating: 3.0A / 250V

  • Mounting Hole: 12mm

RM4.50
  • Terminal: SPST

  • Rating: 3.0A / 250V

  • Mounting Hole: 12mm

RM4.50
  • Terminal: SPST

  • Rating: 3.0A / 250V

  • Mounting Hole: 12mm

RM4.50
  • 3W High Power Integrated LED
  • Colour : White
  • Brightness : 140-150LM
  • Forward Voltage : 3.35V-3.6V DC
  • Forward Current : 0.6A
RM3.00
  • 3W High Power Plant Growing LED
  • Spectrum : 400-840nm 
  • Brightness : 260-280LM
  • Forward Voltage : 3.2V-3.4V DC
  • Forward Current : 0.7A
RM4.00
  • Right Angle Female Header
  • No of Pin : 40
  • Pitch : 2.54mm
RM0.60
  • Single Row Round Female Header Pin
  • No of Pin : 40
  • Pitch : 2.54mm
RM1.60
  • 75W High Power DC Adjustable Step Down Voltage Regulator Module
  • Built With Digital Display 
  • Input Voltage : 4.0-38V
  • Output Voltage : 1.25-36V 
  • Output Current : 5A (MAX) 
RM19.50
  • UK type power adapter 
  • Input: 100V~240V, 50~60Hz
  • Output: DC5V 2A
  • Output Connector: Micro USB
RM14.50
  • Aluminium Heat Sink
  • For 1W, 3W, 5W High Power LED 
  • Excellent Heat Dissipation
  • Easy Welding
  • Dimension : Ø20mm
  • Thickness : 1.5mm
RM0.70
  • 2 pin power supply, on-board power indicator
  • 3 onboard I2C pull-up resistors are required to communicate
  • 4 All pins are drawn and marked, address and write protect pin input can be patched directly
RM6.50
  • Base Shield is to help you getting rid of bread board and jump wires
  • Can add all the grove modules to the Arduino Uno very conveniently
  • 16 grove connectors

 

 

RM43.00
  • Design for the Raspberry PI 3 Model B+
  • The case can be used with CPU cooling fan
  • You can through the GPIO cable by the side of case .
RM10.00
  • Color: Black
  • Material: ABS Plastic
  • Use for: Raspberry PI 4 Model B
RM25.00
  • Current sensor chips : ACS712ELC-30A 
  • Pin 5V power supply with on-board power indicator 
  • Can measure positive and negative 30 amps
  • Voltage is VCC / 2 when no test current through the output
  • PCB board size: 31 mm x13 mm
  • ACS712 is based on the principle of Hall detection, please avoid the magnetic field affect when using it
RM11.50
  • Input Voltage: 0.9 V - 5 V
  • Output Voltage: 5 V
  • Duty ratio coefficient: 66% - 78%
  • Input interface: PH2.0; KF235-3.81-2P
  • Output interface: USB
RM19.00
  •    1.8-2.2V(Red)
  •    3.2-3.4V(Blue,Green,White)
  •    1.7-2.1V(Yellow)
RM15.00
  • 1N5819
  • 1A/40V
RM0.20
  • LM386
  • DIP 8
  • Audio Power Amplifier
RM3.00