Special Offers
- Walk-In Price: RM6.9
- Warranty: 1 Month (T&C Apply)
- Colour: Black
- Material: ABS
- Terminals: Wire leads with DC plug (5.2 x 2.1mm)
- Weight: 41g
- Size: 65 x 70 x 20mm
RM1.08
RM1.80
- Walk-In Price: RM2.5
- Warranty: 1 Month (T&C Apply)
- Colour: Black
- Material: ABS
- Terminal: 150mm wire leads
- Size: 63 x 58 x 17mm
RM0.78
RM1.30
- Walk-In Price: RM5.5
- Warranty: 1 Month (T&C Apply)
- Colour: Black
- Material: ABS
- Terminal: 150mm wire leads
- Size: 65 x 70 x 20mm
- Weight: 37g
RM0.84
RM1.40
- Walk-In Price: RM22
- A component that transfers electrical signals between two isolated circuits by using light
- Prevent high voltages from affecting the system receiving the signal
- A gallium arsenide infrared emitting diode driving a silicon phototransistor in a 6-pin dual in-line package
RM1.56
RM5.20
- Walk-In Price: RM4.5
- Warranty: 1 Month (T&C Apply)
- Max. circuit rating: 35VDC, 100mA
- Contact resistance: 10Ω ~ 500Ω
- Insulation resistance: 100MΩ 100V
- Dielectric withstand: 250Vrms (60Hz, 1min)
- Electric shock jitter: <5ms
RM1.38
RM2.30
- Walk-In Price: RM115
- Warranty: 12 Months (T&C Apply)
- Onboard LDO regulators for 2.8V and 1.8V
- Single 3.3V power input
- 2.54mm (0.1 inch) standard pin out
- Open source project www.ArduCAM.com supported
RM40.00
RM80.00
- Walk-In Price: RM125
- Warranty: 12 Months (T&C Apply)
- Active array size: 2592 x 1944
- Power supply:
- Core: 1.5VDC + 5% (internal regulator)
- Analog: 2.6 ~ 3.0V
- I/O: 1.7 ~ 3.0V
RM35.01
RM116.70
- Walk-In Price: RM294
- Warranty: 12 Months (T&C Apply)
- Model No: C1705ZM07
- Optical Format: 1/1.7 Inch
- Focal Length: 5mm
- Focus Type: Manual
- Mount: C mount
- MOD: 0.15m
RM81.30
RM271.00
- Walk-In Price: RM144
- Warranty: 12 Months (T&C Apply)
- 5MPixel sensor
- Removed IR filter
- Still picture resolution: 2592 x 1944
- Max video resolution: 1080p
RM36.06
RM120.20
- Walk-In Price: RM1.1
- Color: Black
- Material: PBT66
- 5pcs per pack of 2.54mm mini jumper connector
RM0.06
RM0.20
- Warranty: 1 Month (T&C Apply)
- USB 2.0 to Type C
- Current: 2A
- Colour: White
- Cable Length: 1 meter
RM1.05
RM2.10
- Walk-In Price: RM9.00
- Warranty: 1 Months (T&C Apply)
- Standard USB-A connector
- Reversible USB-C connector
- Standard: USB 2.0
- Cable Length: 1 meter
RM1.23
RM4.10
- Walk-In Price: RM26.5
- Warranty: 1 Month (T&C Apply)
- 6 Channel Relay Module with Opto-coupler
- Used to control various appliances and equipment with large current
- Operating Trigger Voltage: 12V DC
- Maximum Conducting Voltage: AC 250V@10A, DC 30V@10
RM4.29
RM14.30
- Walk-In Price: RM26.5
- Warranty: 1 Month (T&C Apply)
- 6 Channel Relay Module with Opto-coupler
- Used to control various appliances and equipment with large current such as Motor, DC/AC Load , Lights and etc
- Standard interface that can be controlled directly by microcontroller, Arduino, Raspberry Pi and etc
RM10.20
RM17.00
- Walk-In Price: RM0.6
- Warranty: 1 Month (T&C Apply)
- Pitch: 2.54mm
- Plastic height: 8.5mm
- Gender of Connector: Female
- Number of Pins: 6 Pin
RM0.12
RM0.20
- Warranty: 12 months (T&C Apply)
- Support 3.7V 18650 rechargeable lithium-ion battery connected in series
- USB-TYPE-C Charging Port
- Built-in charging circuit & short-circuit protection
- Electricity Quantity Display: 4 LED
- Output: 5-way fixed voltage & 1-way 1~20V adjustable output
RM95.75
RM191.50
- Walk-In Price: RM2.5
- Warranty: 1 Month (T&C Apply)
- Model: 623zz
- Material: Chrome steel
- Color: Grey
- Size: 3mmx10mmx4mm
RM0.50
RM1.00
- Walk-In Price: RM2.5
- Warranty: 1 Month (T&C Apply)
- Model: 624zz
- Material: Chrome steel
- Color: Grey
- Size: 4mmx13mmx5mm
RM0.50
RM1.00
- Walk-In Price: RM7.9
- Warranty: 1 Month (T&C Apply)
- Colour: Black
- Material: ABS
- Terminal: 150mm wire leads
- Size: 95 x 70 x 20mm
- Weight: 60g
RM1.17
RM3.90
- Walk-In Price: RM57.5
- Warranty: 12 Months (T&C Apply)
- Output: DC 8.5V 1.5A
- Interface: DC 2.1mm (Female/Male) (Arduino compatible)
- Led Indicator: Red (charging), Green (charged), Green Flash (protection mode triggered)
- Support Battery: 7.4V Lipo Battery (2-cell pack)
RM21.50
RM43.00
- Walk-In Price: RM29.5
- Warranty: 1 Month (T&C Apply)
- 8 Channel Relay Module with Opto-coupler
- Used to control various appliances and equipment with large current such as Motor, DC/AC Load, Lights and etc
- Operating Trigger Voltage: 12V DC
- Maximum Conducting Voltage: AC 250V@10A, DC 30V@10
RM4.11
RM13.70
- Walk-In Price: RM57.00
- Warranty: 1 month (T&C Apply)
- 8 Channel
- Input Voltage: 5V DC
- Max Current: 160mA
- Output Load: 100V - 240V AC, 50Hz/ 60Hz
- Load current: 2A per channel
- Support Low Trigger
RM13.10
RM26.20
- Walk-In Price: RM70
- Warranty: 12 Months (T&C Apply)
- Servo pulse range 0.5ms to 2.5ms.
- UART baud rate are saved in the non-volatile memory (Factory default is baud rate = 9600).
- Dimension: 7.4 cm x 6.6 cm
RM26.10
RM52.20
- Walk-In Price: RM60
- Warranty: 12 Months (T&C Apply)
- This chip perform bidirectional level shifting from pretty much any voltage to any voltage
- It will auto-detect the direction
- Only thing that doesn't work well with this chip is i2c
RM14.49
RM48.30
- Walk-In Price: RM8.9
- Warranty: 1 Month (T&C Apply)
- Colour: Black
- Material: ABS
- Terminal: 150mm wire leads
- Size: 128 x 71 x 20mm
- Weight: 77g
RM1.60
RM3.20
- Walk-In Price: RM11
- 8mm chromed smooth rod steel linear rail shaft 100-350 for CNC 3D printer reprap.
- The rod compatible with SC8UU linear slider and SK8 support frame(Only include rod).
- The rod compatible with the LM8UU linear bearing and SK8 soupport frame(Only include rod).
RM2.00
RM4.00
- Walk-In Price: RM22
- 8mm chromed smooth rod steel linear rail shaft for CNC 3D printer reprap.
- The rod compatible with SC8UU linear slider and SK8 support frame(Only include rod).
- The rod compatible with the LM8UU linear bearing and SK8 soupport frame(Only include rod).
RM6.70
RM13.40
- Walk-In Price: RM28
- 8mm chromed smooth rod steel linear rail shaft for CNC 3D printer reprap.
- The rod compatible with SC8UU linear slider and SK8 support frame(Only include rod).
- The rod compatible with the LM8UU linear bearing and SK8 soupport frame(Only include rod).
RM7.80
RM15.60
- Walk-In Price: RM39
- 8mm chromed smooth rod steel linear rail shaft for CNC 3D printer reprap.
- The rod compatible with SC8UU linear slider and SK8 support frame(Only include rod).
- The rod compatible with the LM8UU linear bearing and SK8 soupport frame(Only include rod).
RM10.50
RM21.00
- Walk-In Price: RM204
- Warranty: 12 Months (T&C Apply)
- Sony 8MP IMX219 Sensor
- Optical Format: 1/4 inch
- Data Format: RAW8/RAW10
- View Angle: 75 Deg. (Horizontal)
- Interface: MIPI CSI-2 2-lane
- IR Sensitivity: IR Sensitive, without IR Filter
RM39.66
RM132.20
- Walk-In Price: RM10.00
- Warranty: 1 Month (T&C Apply)
- Low RDS (On) Output
- Internal UVLO
- Cross-current protection
- 3.3 and 5 V compatible logic supply
- Suitable for 8v- 35v Stepper Motor
- Current Maximum: 2A
RM2.46
RM4.10
- Walk-In Price: RM11
- Warranty: 1 Month (T&C Apply)
- Material: Steel
- L shape bracket
- Thickness: 3mm
- Size: 56mm x 50mm x 38mm (L x W x H)
RM2.13
RM7.10
- Walk-In Price: RM14
- Warranty: 1 Month (T&C Apply)
- UK type power adapter
- Input: 100V~240V, 50~60Hz
- Output: DC12V 1A
- Output Connector: DC plug
RM2.64
RM8.80
- Walk-In Price: RM17
- Warranty: 1 Month (T&C Apply)
- UK type power adapter
- Input: 100V~240V, 50~60Hz
- Output: DC5V 2A
- Output Connector: DC plug
RM4.44
RM7.40
- Walk-In Price: RM28.00
- Warranty: 1 Month (T&C Apply)
- Input: 100V~240V, 50~60Hz
- Output: DC5V 3A
- Plug Specifications: UK Plug
- Adapters Connector: Micro C
- Suitable for charging smartphone
RM5.46
RM9.10
- Walk-In Price: RM20
- Warranty: 1 Month (T&C Apply)
- Input: 100V~240V, 50/60Hz
- Output: DC6V 1.5A
- Cable Length: +/-90cm
- Plug Specifications: UK Plug
RM2.55
RM5.10
- Walk-In Price: RM17
- Warranty: 1 Month (T&C Apply)
- UK type power adapter
- Input: 100V~240V, 50~60Hz
- Output: DC9V 1A
- Output Connector: DC plug
RM2.79
RM9.30
- Walk-In Price: RM21.9
- Warranty: 1 Month (T&C Apply)
- UK type power adapter
- Input: 100V~240V, 50~60Hz
- Output: DC9V 2A
- Output Connector: DC plug
RM5.94
RM9.90
- Walk-In Price: RM28.00
- Warranty: 1 Month (T&C Apply)
- Material: Acrylic
- Color: Transparent
- Compatible with NVIDIA Jetson Nano Development Board(A02 & B01)
RM9.95
RM19.90
- Walk-In Price: RM4
- Warranty: 12 Months (T&C Apply)
- For the Xboard Relay and Romeo - an Arduino Robot Control Board
- Transparent acrylic panels looks crystal clear and clean
- Two different choise for different hobbies
- Basic version is a atable base
- Special version is more eye-catching
RM0.55
RM1.10
- Walk-In Price: RM53.00
- Warranty: 12 Months (T&C Apply)
- A fully tested and assembled LED backpack
- Ultra-bright 4-digit 0.56" tall white seven-segment display
- 4-pin header
RM18.45
RM36.90
- Walk-In Price: RM120
- Warranty: 12 Months (T&C Apply)
- I2C-controlled PWM driver with a built in clock.
- 5V compliant
- 6 address select pins
RM36.05
RM72.10
- Walk-In Price: RM25.50
- Warranty: 12 Months (T&C Apply)
- Can break out all those tasty power, GPIO, I2C and SPI pins from the 26 pin header
- Make "cobbling together" prototypes with the Pi super easy
- Designed for use with Raspberry Pi 1 Model B AND Model A, both revisions
RM3.40
RM6.80
- Walk-In Price: RM80.00
- Warranty: 12 Months (T&C Apply)
- 1.2" Bi-color 8x8 LED Matrix
- 24 pins
- 33mm x 41mm x 4mm / 1.3" x 1.6" x 0.16"
RM26.90
RM53.80
- Walk-In Price: RM144
- Warranty: 12 Months (T&C Apply)
- Adafruit DC & Stepper Motor HAT for Raspberry Pi
- Perfect for any motion project
- Dimensions w/ components: 65mm x 56mm x 13mm
RM34.29
RM114.30
- Walk-In Price: RM39
- Warranty: 12 Months (T&C Apply)
-
Bi-polar or uni-polar stepper with up to 1.2A per channel using the DRV8833
-
Size: 26mm x 18mm x 3mm / 1.0" x 0.7" x 0.1"
-
Weight: 1.5g
RM7.80
RM26.00
- Walk-In Price: RM205
- Warranty: 12 Months (T&C Apply)
- Measures 2.4" x 0.9" x 0.28" (61mm x 23mm x 7mm) without headers soldered in
- Light as a (large?) feather - 8.2 grams
- ATmega32u4 @ 8MHz with 3.3V logic/power
- 3.3V regulator with 500mA peak current output
- USB native support, comes with USB bootloader and serial port debugging
RM69.60
RM139.20
- Walk-In Price: RM115
- Warranty: 12 Months (T&C Apply)
- ATSAMD21G18 @ 48MHz with 3.3V logic/power
- 3.3V regulator with 500mA peak current outpu0t
- USB native support, comes with USB bootloader and serial port debugging
- You also get tons of pins - 20 GPIO pins
- Hardware Serial, hardware I2C, hardware SPI support
RM37.90
RM75.80
- Walk-In Price: RM75
- Warranty: 12 Months (T&C Apply)
- For use with 16x2 Character displays
- Plug and play with any Arduino 'classic' - UNO, duemilanove, diecimilla, etc as well as Arduino Mega R3.
- Uses only the I2C pins - Analog 4 & 5 on classic Arduinos, Digital 20 and 21 on Arduino Mega R3
- This board/chip uses I2C 7-bit address 0x20
RM23.85
RM47.70
- Walk-In Price: RM40
- Warranty: 12 Months (T&C Apply)
- Comes assembled and tested with a free bonus JST cable!
- 5V input via PCB-style USB connector
- For charging single Lithium Ion/Lithium Polymer 3.7/4.2v batteries (not for older 3.6/4.1v cells)
- 100mA charge current, adjustable to 500mA by soldering a jumper closed
- Free 2-pin JST cable included!
RM10.95
RM21.90
- Walk-In Price: RM39
- Warranty: 12 Months (T&C Apply)
- PCB & header are included
- Plugs into any breadboard, or you can use wires
- Two mounting holes
- Will keep time for 5 years or more
RM7.23
RM24.10
- Walk-In Price: RM70
- Warranty: 12 Months (T&C Apply)
- Non-latching type relay
- Voltage: Up to 250VAC
- Can handle a beefy 1200 Watts
- Switch up to 10A of resistive-load current at 120VAC, 5A at 240VAC
RM14.82
RM49.40
- Walk-In Price: RM70
- Warranty: 12 Months (T&C Apply)
- It has a nice standard 0.1"x0.1" prototying grid with big pads
- Comes with Stacking headers and plain header, choose whichever you want when soldering together
- A IC pattern for adding DIP ICs up to 20 pins
- Power rails down the middle and sides
- A reset button and an extra general use button
RM15.24
RM50.80
- Walk-In Price: RM134
- Warranty: 12 Months (T&C Apply)
- Packet radio with ready-to-go Arduino libraries
- Uses the amateur or license-free ISM band (ITU "Europe" license-free ISM or ITU "American" amateur with limitations)
- Use a simple wire antenna or spot for uFL or SMA radio connector
- SX1276 LoRa® based module with SPI interface
RM30.51
RM101.70
- Walk-In Price: RM134
- Warranty: 12 Months (T&C Apply)
- Comes with a 16x2 RGB POSITIVE LCD
- Plug and play with any Raspberry Pi
- Uses only the I2C (SDA/SCL) pins
RM40.60
RM81.20
- Walk-In Price: RM104
- Warranty: 12 Months (T&C Apply)
- Based on the best-of-class Si4713
- All-in-one stereo audio FM transmitter that can also transmit RDS/RBDS data
- Wire up to your favorite microcontroller to the I2C data lines
RM33.25
RM66.50
- Walk-In Price: RM39
- Warranty: 12 Months (T&C Apply)
- Stand-alone breakout that will turn any electronics into low-power electronics
- Product Dimensions: 19.3mm x 18.0mm x 4.5mm / 0.8" x 0.7" x 0.2"
- Product Weight: 1.3g / 0.0oz
RM7.65
RM25.50
- Walk-In Price: RM49
- Warranty: 12 Months (T&C Apply)
- Current draw: 20uA
- Product Dimensions: 19.5mm x 17.8mm x 5.0mm
- Product Weight: 1.4g
RM10.80
RM21.60
- Walk-In Price: RM204
- Warranty: 12 Months (T&C Apply)
- -165 dBm sensitivity, 10 Hz updates, 66 channels
- Low power module - only 20mA current draw, half of most GPS's
- Assembled & tested shield for Arduino Uno/Duemilanove/Diecimila/Leonardo (not for use with Mega/ADK/Due)
RM80.00
RM160.00
- Walk-In Price: RM99.50
- Warranty: 12 Months (T&C Apply)
- Can play any uncompressed 22KHz 16bit (on a 12bit DAC), mono Wave (.wav) files of any size.
- While it isnt CD quality, it is certainly good enough to play music, have spoken word, or audio effects.
- Output is mono, into L and R channels, standard 3.5mm headphone jack
RM38.05
RM76.10
- Warranty: 12 Months (T&C Apply)
- Compatible with Arduino UNO, Leonardo, easy to connect with various Arduino shields
- XBee connector for connecting various XBee modules
- Sensor interface for connecting various sensors
- Onboard USB TO UART for serial port debugging, also can be configured as XBee USB adapter
RM31.90
RM63.80
- Walk-In Price: RM28.00
- Warranty: 1 Month (T&C Apply)
- High quality aluminum heatsink/heat sink holder
- For 10mm laser modules
- Inner diameter of this one is 10.5mm
- Two bolts on the top to fix the laser
RM5.91
RM19.70
- Walk-In Price: RM10.00
- Warranty: 1 Month (T&C Apply)
- Material: 2mm Hard aluminum
- Surfacing: Sandblasting oxidation
- Size: 123mm x 64mm
- Weight: 34.5g
- Color: Black sandblasting oxidation
RM3.15
RM6.30
- Walk-In Price: RM10.00
- Warranty: 1 Month (T&C Apply)
- Material: 2mm Hard aluminum
- Surfacing: Sandblasting oxidation
- Size: 123mm x 64mm
- Weight: 34.5g
- Color: Silver sandblasting oxidation
RM2.40
RM4.80
- Walk-In Price: RM10.9
- Warranty: 12 Months (T&C Apply)
- Material: 2mm Hard aluminum
- Surfacing: Sandblasting oxidation
- Size: 105mm x 60mm
- Weight: 35g
- Color: Silver sandblasting oxidation
RM3.10
RM6.20
- Walk-In Price: RM0.8
- Warranty: 1 Month (T&C Apply)
- For 2020 European Standard Aluminum
- Increase the aesthetics and can guarantee the safety
- Only one hole on the inner surface
RM0.15
RM0.30
- Walk-In Price: RM3.00
- Warranty: 1 Month (T&C Apply)
- High quality carbon steel
- Durable and solid
- Surface is plated with nickel
- Concealed corner brace
- Suitable for 2020 series aluminum profiles
RM0.51
RM1.70
- Walk-In Price: RM0.8
- Good quality products
- Used for 3030 industrial aluminium profile
- Simple to use
- Widely used in many field
RM0.09
RM0.30
- Walk-In Price: RM9
- Surface is plated with nickel, good rust resistance.
- High strength and hardness.
- Durable in use.
- Easy to use and convenient to connect aluminum profiles to other parts.
- Mainly used for European standard aluminum extrusion profiles.
RM1.14
RM3.80
- Walk-In Price: RM0.8
- Good quality products
- Used for 4040 industrial aluminium profile
- Simple to use
- Widely used in many field
RM0.09
RM0.30
- Walk-In Price: RM4.5
- Warranty: 1 Month (T&C Apply)
- High quality carbon steel
- Durable and solid
- Surface is plated with nickel
- Concealed corner brace
- Suitable for 4040 series aluminum profiles
RM0.96
RM3.20
- Walk-In Price: RM2.50
- Warranty: 1 Month (T&C Apply)
- For 4080 European Standard Aluminum
- Increase the aesthetics and can guarantee the safety
- Two holes on the inner surface
RM0.27
RM0.90
- Walk-In Price: RM18
- Warranty: 12 Months (T&C Apply)
- Supply Voltage: 3.3V to 5V
- Illumination range : 1 Lux to 6000 Lux
- Responsive time : 15us
- Interface: Analog
- Size:22x30mm(0.87"x1.18")
RM3.48
RM11.60
- Walk-In Price: RM5.50
- Warranty: 1 Month (T&C Apply)
- Servo rotation direction
- Servo sensitivity of each cell of the test: 0.01ms
- Operation: Auto / Manual
- LED digital display: Red
RM0.75
RM1.50
- Walk-In Price: RM339.00
- Warranty: 12 Months (T&C Apply)
- Sensor type: Sony IMX219 Color CMOS 8-megapixel
- IR Sensitive: build-in 650nm IR filter, none sensitive to IR light
- Lens: M12 customizable
- Angle of View: Horizontal FOV 70 degree
RM154.20
RM257.00
- Walk-In Price: RM459
- Warranty: 12 Months (T&C Apply)
- Real PTZ with servos for directional control and varifocal lens for optical zoom comes to the Raspberry Pi
- CSI connector that a single camera can be used to monitor places that should be covered by multiple ones
- Autofocus control, pan/tilt/zoom keyboard control supported in software
- 8MP IMX219 Camera board
RM113.49
RM378.30
- Walk-In Price: RM240
- Warranty: 12 Months (T&C Apply)
- 1/2.3" optical format
- RGB Bayer pattern
- 14MP 4608 x 3288 MT9F001/002 sensor
- 1.4 x 1.4 um Pixel size
- 6.3fps at full resolution
RM87.55
RM175.10
- Warranty: 12 Months (T&C Apply)
- Accommodate 4 Raspberry Pi cameras on a single RPi board
- Support 12MP IMX708 (Pi Camera V3) / 5MP OV5647 / 8MP IMX219 / 12MP IMX477 camera for Raspberry Pi, no mixing allowed
- Support Raspberry Pi Model A/B/B+, Pi 2 and Raspberry Pi 4, 3,3b+.
- 3 GPIOs required for multiplexing
- Cameras work in sequential, not simultaneously
RM63.00
RM210.00
- Walk-In Price: RM1.1
- Warranty: 1 Month (T&C Apply)
- Pitch 2.54mm
- Plastic height: 8.9±0.2mm
- 6 Pin
- Single-Row
RM0.15
RM0.30
- Warranty: 1 year (T&C Apply)
- Microcontroller: SAMD21 Cortex-M0+ 32bit low power ARM MCU
- Board Power Supply (USB/VIN): 5V
- Circuit Operating Voltage: 3.3V
RM69.15
RM138.30
- Walk-In Price: RM28
- Warranty: 1 Month (T&C Apply)
- Product name: Light control switch
- Operating voltage: AC 220V
- Load voltage: 10A
- Load power: 2200W
- Delay closing time: 0.1S
- Frequency: 50-60HZ
- Ambient temp: -20 °C to +50 °C
RM3.06
RM10.20
- Walk-in Price (Header Version): RM94.90
- Walk-in Price (Pre-soldered): RM74.90
- Warranty: 12 months (T&C Apply)
- Built-in L298P motor driver with an ESP-12E WiFi module
- Wide Input Voltage Range: (5 - 35V)
- High power I/O ports
- Multiple programming platforms
- Able to control servo motor with your pico wirelessly
RM20.31
RM67.70
- Walk-In Price: RM49
- Warranty: 1 Month (T&C Apply)
- 2 in 1 QWERTY 92-key keyboard & touchpad combo
- Ergonomic handheld design
- 2.4GHz wireless connection, smart and portable size with Touch-pad
RM13.08
RM21.80
- Walk-In Price: RM135
- Warranty: 12 Months (T&C Apply)
- Requires no special tools or programming
- Powered by USB
- Features 6x LEDs that produce 6x modes to provide light
- super easy connector system for creating lamps on any sheet material
RM49.15
RM98.30
- Walk-In Price: RM204.50
- Warranty: 12 Months (T&C Apply)
- High-quality audio output
- Extensive tutorials and easy startup experience
- Powerful Python and C++ libraries so you can include sensors in your project
- User-programmable RGB LED and multifunction button
- Prototyping area with GPIO breakout to add additional sensors or buttons
RM80.15
RM160.30
- Walk-In Price: RM49.00
- Warranty: 12 Months (T&C Apply)
- Ready-to-use touch and distance sensors
- Printed with a unique pattern
- Created intricate patterns
- Perfect for testing your ideas quickly
- Like other conductive paint tools and accessories
RM6.75
RM13.50
- Walk-In Price: RM9
- Warranty: 1 Month (T&C Apply)
- Black character, yellow green backlight
- 5 x 8 dots with cursor
- Built-in controller (KS 0066 or Equivalent)
- + 5V power supply (Also available for + 3V)
- 1/16 duty cycle
RM2.70
RM4.50
- Walk-In Price: RM9
- Warranty: 1 Month (T&C Apply)
- White character, blue backlight
- 5 x 8 dots with cursor
- Built-in controller (KS 0066 or Equivalent)
- + 5V power supply (Also available for + 3V)
- 1/16 duty cycle
RM3.06
RM5.10
- Walk-In Price: RM59.90
- Warranty: 1 Month (T&C Apply)
- High Quality armor case for Raspberry Pi 3B+/3B
- Armor case is made of Aluminum Alloy with CNC machining manufacturing technology
- Dual fan and thermal tapes which reduce the temperature for Raspberry Pi board
RM18.00
RM30.00
- Walk-In Price: RM11.00
- Warranty: 1 Month (T&C Apply)
- Material: 2mm Hard aluminum
- Surfacing: Sandblasting oxidation
- Size: 90mm x 29mm x 42mm
- Weight: 48g
- Color: Black
RM1.60
RM3.20
- Walk-In Price: RM5.5
- Manufacturer: ACP
- Type of accessories for potentiometer: Knob
- Kind of knob: Thumbwheel
- Knob dimensions: Ø16mm
RM1.11
RM3.70
- Walk-In Price: RM4.4
- Warranty: 1 Month (T&C Apply)
- Size: 0.3mm orifice
- Operating pressure: 20-70 kg/cm
- Flow rate: 80-145 ml/min
- Minimum water use: 1/2 gallon of water per hour per nozzle
- 3-7 microns is Fog size
RM0.72
RM1.20
- Walk-In Price: RM4.5
- Warranty: 12 Months (T&C Apply)
- For 2020 PCB Connector 8 ways
- Pre-soldered with the male connector
- It converts the signal pins to standard of 0.1"
RM0.60
RM1.20
- Walk-In Price: RM1.1
- Type: Non-Polarized
- Material: Ceramic
- Capacitor Tag: 103
- Rated Voltage: 50V
- Capacitance: 0.01uF
RM0.03
RM0.10
- Walk-In Price: RM1.1
- Type: Non-Polarized
- Material: Ceramic
- Capacitor Tag: 10
- Rated Voltage: 50V
- Capacitance: 10pF
RM0.06
RM0.20
- Walk-In Price: RM1.1
- Type: Non-Polarized
- Material: Ceramic
- Capacitor Tag: 151
- Rated Voltage: 50V
- Capacitance: 150pF
RM0.09
RM0.30
- Walk-In Price: RM1.1
- Type: Non-Polarized
- Material: Ceramic
- Capacitor Tag: 15
- Rated Voltage: 50V
- Capacitance: 15pF
RM0.09
RM0.30
- Walk-In Price: RM1.1
- Type: Non-Polarized
- Material: Ceramic
- Capacitor Tag: 109
- Rated Voltage: 50V
- Capacitance: 1pF
RM0.09
RM0.30
- Walk-In Price: RM1.1
- Type: Non-Polarized
- Material: Ceramic
- Capacitor Tag: 20
- Rated Voltage: 50V
- Capacitance: 20pF
RM0.06
RM0.20
- Walk-In Price: RM1.1
- Type: Non-Polarized
- Material: Ceramic
- Capacitor Tag: 222
- Rated Voltage: 50V
- Capacitance: 2200pF
RM0.09
RM0.30