- Connector Type: Female IDC Connecter
- Pin Number: 10 pin (2x5)
- Connector Pitch:2.54 mm
- Cable Pitch:1.27 mm
- Length: ~20cm
RM0.88
RM1.10
- Walk-In Price: RM250
- Warranty: 12 Months (T&C Apply)
- 240x320 resolution,18-bit (262,000) color
- Onboard 3.3V @ 300mA LDO regulator
- 4 white LED backlight
- High speed SPI display with digital I2C touchscreen driver
RM86.45
RM172.90
- Walk-In Price: RM32
- Warranty: 12 Months (T&C Apply)
- This level shifter board combines the ease-of-use of the bi-directional TXB0108 with an I2C-compatible FET design following NXP's app note.
- This breakout has 4 BSS138 FETs with 10K pullups.
- It works down to 1.8V on the low side, and up to 10V on the high side.
RM9.60
RM19.20
- Walk-In Price: RM60
- Warranty: 12 Months (T&C Apply)
- This chip perform bidirectional level shifting from pretty much any voltage to any voltage
- It will auto-detect the direction
- Only thing that doesn't work well with this chip is i2c
RM24.15
RM48.30
- Walk-In Price: RM53.00
- Warranty: 12 Months (T&C Apply)
- A fully tested and assembled LED backpack
- Ultra-bright 4-digit 0.56" tall white seven-segment display
- 4-pin header
RM18.45
RM36.90
- Walk-In Price: RM94
- Warranty: 12 Months (T&C Apply)
- Configurable push-pull or open-drain output
- Output enable pin to quickly disable all the outputs
- Reverse polarity protection on the terminal block input
- Green power-good LED
RM89.00
- Walk-In Price: RM120
- Warranty: 12 Months (T&C Apply)
- I2C-controlled PWM driver with a built in clock.
- 5V compliant
- 6 address select pins
RM36.05
RM72.10
- Walk-In Price: RM204
- Warranty: 12 Months (T&C Apply)
- Absolute Orientation
- Absolute Orientation
- Angular Velocity Vector
- Acceleration Vector
- Magnetic Field Strength Vector
- Linear Acceleration Vector
RM199.00
- Walk-In Price: RM275
- Warranty: 12 Months (T&C Apply)
- 8x8 Array of IR Thermal Sensors
- Temperatures Ranging: 0°C to 80°C
- Accuracy: +- 2.5°C (4.5°F)
- Maximum Frame Rate: 10Hz
RM237.80
- Walk-In Price: RM25.50
- Warranty: 12 Months (T&C Apply)
- Can break out all those tasty power, GPIO, I2C and SPI pins from the 26 pin header
- Make "cobbling together" prototypes with the Pi super easy
- Designed for use with Raspberry Pi 1 Model B AND Model A, both revisions
RM3.40
RM6.80
- Walk-In Price: RM134
- Warranty: 12 Months (T&C Apply)
- No Arduino or other microcontroller required! It is completely stand-alone, just needs a 3 to 5.5VDC battery
- Small - only 1.5" x 0.9"
- Built in storage - yep! you don't even need an SD card, there's 16MB of storage on the board itself
RM129.00
- Walk-In Price: RM80.00
- Warranty: 12 Months (T&C Apply)
- 1.2" Bi-color 8x8 LED Matrix
- 24 pins
- 33mm x 41mm x 4mm / 1.3" x 1.6" x 0.16"
RM26.90
RM53.80
- Walk-In Price: RM144
- Warranty: 12 Months (T&C Apply)
- Adafruit DC & Stepper Motor HAT for Raspberry Pi
- Perfect for any motion project
- Dimensions w/ components: 65mm x 56mm x 13mm
RM57.15
RM114.30
- Walk-In Price: RM39
- Warranty: 12 Months (T&C Apply)
-
Bi-polar or uni-polar stepper with up to 1.2A per channel using the DRV8833
-
Size: 26mm x 18mm x 3mm / 1.0" x 0.7" x 0.1"
-
Weight: 1.5g
RM13.00
RM26.00
- Walk-In Price: RM205
- Warranty: 12 Months (T&C Apply)
- Measures 2.4" x 0.9" x 0.28" (61mm x 23mm x 7mm) without headers soldered in
- Light as a (large?) feather - 8.2 grams
- ATmega32u4 @ 8MHz with 3.3V logic/power
- 3.3V regulator with 500mA peak current output
- USB native support, comes with USB bootloader and serial port debugging
RM69.60
RM139.20
- Walk-In Price: RM115
- Warranty: 12 Months (T&C Apply)
- ATSAMD21G18 @ 48MHz with 3.3V logic/power
- 3.3V regulator with 500mA peak current outpu0t
- USB native support, comes with USB bootloader and serial port debugging
- You also get tons of pins - 20 GPIO pins
- Hardware Serial, hardware I2C, hardware SPI support
RM37.90
RM75.80
- Walk-In Price: RM75
- Warranty: 12 Months (T&C Apply)
- For use with 16x2 Character displays
- Plug and play with any Arduino 'classic' - UNO, duemilanove, diecimilla, etc as well as Arduino Mega R3.
- Uses only the I2C pins - Analog 4 & 5 on classic Arduinos, Digital 20 and 21 on Arduino Mega R3
- This board/chip uses I2C 7-bit address 0x20
RM23.85
RM47.70
- Warranty: 12 Months (T&C Apply)
- Support 3.3V or 5V
- Uses I2C to communicate
- Easy to use
RM63.80
- Walk-In Price: RM40
- Warranty: 12 Months (T&C Apply)
- Comes assembled and tested with a free bonus JST cable!
- 5V input via PCB-style USB connector
- For charging single Lithium Ion/Lithium Polymer 3.7/4.2v batteries (not for older 3.6/4.1v cells)
- 100mA charge current, adjustable to 500mA by soldering a jumper closed
- Free 2-pin JST cable included!
RM10.95
RM21.90
- Walk-In Price: RM140
- Warranty: 12 Months (T&C Apply)
- Up to 4 bi-directional DC motors with individual 8-bit speed selection (so, about 0.5% resolution)
- Up to 2 stepper motors (unipolar or bipolar) with single coil, double coil, interleaved or micro-stepping.
- Motors automatically disabled on power-up
RM135.00
- Walk-In Price: RM39
- Warranty: 12 Months (T&C Apply)
- PCB & header are included
- Plugs into any breadboard, or you can use wires
- Two mounting holes
- Will keep time for 5 years or more
RM12.05
RM24.10
- Walk-In Price: RM70
- Warranty: 12 Months (T&C Apply)
- Non-latching type relay
- Voltage: Up to 250VAC
- Can handle a beefy 1200 Watts
- Switch up to 10A of resistive-load current at 120VAC, 5A at 240VAC
RM24.70
RM49.40
- Walk-In Price: RM70
- Warranty: 12 Months (T&C Apply)
- It has a nice standard 0.1"x0.1" prototying grid with big pads
- Comes with Stacking headers and plain header, choose whichever you want when soldering together
- A IC pattern for adding DIP ICs up to 20 pins
- Power rails down the middle and sides
- A reset button and an extra general use button
RM25.40
RM50.80
- Walk-In Price: RM134
- Warranty: 12 Months (T&C Apply)
- Packet radio with ready-to-go Arduino libraries
- Uses the amateur or license-free ISM band (ITU "Europe" license-free ISM or ITU "American" amateur with limitations)
- Use a simple wire antenna or spot for uFL or SMA radio connector
- SX1276 LoRa® based module with SPI interface
RM30.51
RM101.70
- Walk-In Price: RM150
- Warranty: 12 Months (T&C Apply)
- PCB Dimensions: 65mm x 57mm x 2mm / 2.6" x 2.2" x 0.08"
- Height (with barrel input): 13mm / 0.5"
- Weight: 15g
RM145.00
- Walk-In Price: RM134
- Warranty: 12 Months (T&C Apply)
- Comes with a 16x2 RGB POSITIVE LCD
- Plug and play with any Raspberry Pi
- Uses only the I2C (SDA/SCL) pins
RM40.60
RM81.20
- Walk-In Price: RM104
- Warranty: 12 Months (T&C Apply)
- Based on the best-of-class Si4713
- All-in-one stereo audio FM transmitter that can also transmit RDS/RBDS data
- Wire up to your favorite microcontroller to the I2C data lines
RM33.25
RM66.50
- Walk-In Price: RM39
- Warranty: 12 Months (T&C Apply)
- Stand-alone breakout that will turn any electronics into low-power electronics
- Product Dimensions: 19.3mm x 18.0mm x 4.5mm / 0.8" x 0.7" x 0.2"
- Product Weight: 1.3g / 0.0oz
RM12.75
RM25.50
- Walk-In Price: RM49
- Warranty: 12 Months (T&C Apply)
- Current draw: 20uA
- Product Dimensions: 19.5mm x 17.8mm x 5.0mm
- Product Weight: 1.4g
RM10.80
RM21.60
- Walk-In Price: RM53
- Warranty: 12 Months (T&C Apply)
- TSL2591 luminosity sensor is an advanced digital light sensor
- Ideal for use in a wide range of light situations
- Compared to low cost CdS cells, this sensor is more precise, allowing for exact lux calculations
RM49.00