Search result
- Walk-In Price: RM39
- Warranty: 12 Months (T&C Apply)
-
Bi-polar or uni-polar stepper with up to 1.2A per channel using the DRV8833
-
Size: 26mm x 18mm x 3mm / 1.0" x 0.7" x 0.1"
-
Weight: 1.5g
RM7.80
RM26.00
- Walk-In Price: RM115
- Warranty: 12 Months (T&C Apply)
- ATSAMD21G18 @ 48MHz with 3.3V logic/power
- 3.3V regulator with 500mA peak current outpu0t
- USB native support, comes with USB bootloader and serial port debugging
- You also get tons of pins - 20 GPIO pins
- Hardware Serial, hardware I2C, hardware SPI support
RM37.90
RM75.80
- Walk-In Price: RM75
- Warranty: 12 Months (T&C Apply)
- For use with 16x2 Character displays
- Plug and play with any Arduino 'classic' - UNO, duemilanove, diecimilla, etc as well as Arduino Mega R3.
- Uses only the I2C pins - Analog 4 & 5 on classic Arduinos, Digital 20 and 21 on Arduino Mega R3
- This board/chip uses I2C 7-bit address 0x20
RM23.85
RM47.70
- Walk-In Price: RM40
- Warranty: 12 Months (T&C Apply)
- Comes assembled and tested with a free bonus JST cable!
- 5V input via PCB-style USB connector
- For charging single Lithium Ion/Lithium Polymer 3.7/4.2v batteries (not for older 3.6/4.1v cells)
- 100mA charge current, adjustable to 500mA by soldering a jumper closed
- Free 2-pin JST cable included!
RM10.95
RM21.90
- Walk-In Price: RM39
- Warranty: 12 Months (T&C Apply)
- PCB & header are included
- Plugs into any breadboard, or you can use wires
- Two mounting holes
- Will keep time for 5 years or more
RM7.23
RM24.10
- Walk-In Price: RM70
- Warranty: 12 Months (T&C Apply)
- Non-latching type relay
- Voltage: Up to 250VAC
- Can handle a beefy 1200 Watts
- Switch up to 10A of resistive-load current at 120VAC, 5A at 240VAC
RM14.82
RM49.40
- Walk-In Price: RM70
- Warranty: 12 Months (T&C Apply)
- It has a nice standard 0.1"x0.1" prototying grid with big pads
- Comes with Stacking headers and plain header, choose whichever you want when soldering together
- A IC pattern for adding DIP ICs up to 20 pins
- Power rails down the middle and sides
- A reset button and an extra general use button
RM15.24
RM50.80
- Walk-In Price: RM134
- Warranty: 12 Months (T&C Apply)
- Packet radio with ready-to-go Arduino libraries
- Uses the amateur or license-free ISM band (ITU "Europe" license-free ISM or ITU "American" amateur with limitations)
- Use a simple wire antenna or spot for uFL or SMA radio connector
- SX1276 LoRa® based module with SPI interface
RM30.51
RM101.70
- Walk-In Price: RM134
- Warranty: 12 Months (T&C Apply)
- Comes with a 16x2 RGB POSITIVE LCD
- Plug and play with any Raspberry Pi
- Uses only the I2C (SDA/SCL) pins
RM40.60
RM81.20
- Walk-In Price: RM104
- Warranty: 12 Months (T&C Apply)
- Based on the best-of-class Si4713
- All-in-one stereo audio FM transmitter that can also transmit RDS/RBDS data
- Wire up to your favorite microcontroller to the I2C data lines
RM33.25
RM66.50
- Walk-In Price: RM39
- Warranty: 12 Months (T&C Apply)
- Stand-alone breakout that will turn any electronics into low-power electronics
- Product Dimensions: 19.3mm x 18.0mm x 4.5mm / 0.8" x 0.7" x 0.2"
- Product Weight: 1.3g / 0.0oz
RM7.65
RM25.50
- Walk-In Price: RM49
- Warranty: 12 Months (T&C Apply)
- Current draw: 20uA
- Product Dimensions: 19.5mm x 17.8mm x 5.0mm
- Product Weight: 1.4g
RM10.80
RM21.60
- Walk-In Price: RM53
- Warranty: 12 Months (T&C Apply)
- TSL2591 luminosity sensor is an advanced digital light sensor
- Ideal for use in a wide range of light situations
- Compared to low cost CdS cells, this sensor is more precise, allowing for exact lux calculations
RM49.00
- Walk-In Price: RM99.50
- Warranty: 12 Months (T&C Apply)
- Can play any uncompressed 22KHz 16bit (on a 12bit DAC), mono Wave (.wav) files of any size.
- While it isnt CD quality, it is certainly good enough to play music, have spoken word, or audio effects.
- Output is mono, into L and R channels, standard 3.5mm headphone jack
RM38.05
RM76.10
- Warranty: 12 Months (T&C Apply)
- Compatible with Arduino UNO, Leonardo, easy to connect with various Arduino shields
- XBee connector for connecting various XBee modules
- Sensor interface for connecting various sensors
- Onboard USB TO UART for serial port debugging, also can be configured as XBee USB adapter
RM31.90
RM63.80
- Walk-In Price: RM28.00
- Warranty: 1 Month (T&C Apply)
- High quality aluminum heatsink/heat sink holder
- For 10mm laser modules
- Inner diameter of this one is 10.5mm
- Two bolts on the top to fix the laser
RM5.91
RM19.70
- Walk-In Price: RM9.9
- Warranty: 1 Month (T&C Apply)
- Model: ADXL345
- On-board ADXL345 digital output(support the I2C/SPI),
- Low-power consumption
- Compact acceleration sensor
RM6.40
- Walk-In Price: RM10.00
- Warranty: 1 Month (T&C Apply)
- Material: 2mm Hard aluminum
- Surfacing: Sandblasting oxidation
- Size: 123mm x 64mm
- Weight: 34.5g
- Color: Black sandblasting oxidation
RM3.15
RM6.30
- Walk-In Price: RM10.00
- Warranty: 1 Month (T&C Apply)
- Material: 2mm Hard aluminum
- Surfacing: Sandblasting oxidation
- Size: 123mm x 64mm
- Weight: 34.5g
- Color: Silver sandblasting oxidation
RM2.40
RM4.80
- Walk-In Price: RM10.9
- Warranty: 12 Months (T&C Apply)
- Material: 2mm Hard aluminum
- Surfacing: Sandblasting oxidation
- Size: 105mm x 60mm
- Weight: 35g
- Color: Silver sandblasting oxidation
RM3.10
RM6.20
- Walk-In Price: RM0.8
- Warranty: 1 Month (T&C Apply)
- For 2020 European Standard Aluminum
- Increase the aesthetics and can guarantee the safety
- Only one hole on the inner surface
RM0.15
RM0.30
- Walk-In Price: RM3.00
- Warranty: 1 Month (T&C Apply)
- High quality carbon steel
- Durable and solid
- Surface is plated with nickel
- Concealed corner brace
- Suitable for 2020 series aluminum profiles
RM0.51
RM1.70
- Walk-In Price: RM0.8
- Good quality products
- Used for 3030 industrial aluminium profile
- Simple to use
- Widely used in many field
RM0.09
RM0.30
- Walk-In Price: RM3.5
- Warranty: 1 Month (T&C Apply)
- High quality carbon steel
- Durable and solid
- Surface is plated with nickel
- Concealed corner brace
- Suitable for 3030 series aluminum profiles
RM2.30
- Walk-In Price: RM9
- Surface is plated with nickel, good rust resistance.
- High strength and hardness.
- Durable in use.
- Easy to use and convenient to connect aluminum profiles to other parts.
- Mainly used for European standard aluminum extrusion profiles.
RM1.14
RM3.80
- Walk-In Price: RM0.8
- Good quality products
- Used for 4040 industrial aluminium profile
- Simple to use
- Widely used in many field
RM0.09
RM0.30
- Walk-In Price: RM4.5
- Warranty: 1 Month (T&C Apply)
- High quality carbon steel
- Durable and solid
- Surface is plated with nickel
- Concealed corner brace
- Suitable for 4040 series aluminum profiles
RM0.96
RM3.20
- Walk-In Price: RM2.50
- Warranty: 1 Month (T&C Apply)
- For 4080 European Standard Aluminum
- Increase the aesthetics and can guarantee the safety
- Two holes on the inner surface
RM0.27
RM0.90
- Walk-In Price: RM18
- Warranty: 12 Months (T&C Apply)
- Supply Voltage: 3.3V to 5V
- Illumination range : 1 Lux to 6000 Lux
- Responsive time : 15us
- Interface: Analog
- Size:22x30mm(0.87"x1.18")
RM3.48
RM11.60
- Walk-In Price: RM49
- Warranty: 12 Months (T&C Apply)
-
Can detect the 240-370nm range of light
-
Dimensions: 10mm x 19mm x 2mm / 0.4" x 0.75" x 0.08"
-
Weight: 0.7g
RM36.20