SparkFun
Refine Search
POWER
ELECTRONIC COMPONENTS
SENSORS
MOTORS / CONTROLLERS
LED
TOOLS & INSTRUMENTS
★ ARDUINO
★ MICRO:BIT
- Walk-In Price: RM155
- Warranty: 12 Months (T&C Apply)
- Enables your Arduino with the capability of splitting a stereo audio input into 7-bands per channel
- Read the amplitude of each channel using the ADC on your Arduino allowing you to control everything from LEDs to motors, pumps to relays, or even fire, all with sound
- Features the MSGEQ7 graphic equalizer display filter
- Updated to the Arduino R3 layout but still requires you to solder on your own headers
- Can be used to create sound visualizers, detect patterns in music or add sound activation to your microcontroller projects.
RM43.80
RM87.60
- Walk-In Price: RM7.9
- Warranty: 12 Months (T&C Apply)
- Detect orientation.
- Contact with the pins when the case is upright
RM2.60
RM5.20
- Walk-In Price: RM74
- Warranty: 12 Months (T&C Apply)
- On-board 3.3V LDO Regulator (3.3 to 7V supply allowed)
- On-board ceramic 2.4GHz Antenna
- 100m Range at 250kbps
RM26.15
RM52.30
- Walk-In Price: RM80
- Warranty: 12 Months (T&C Apply)
- SparkFun USB LiPo Charger is a basic charging circuit
- Allows to charge 3.7V LiPo cells at a rate of 500mA or 100mA
- Designed to charge single-cell Li-Ion or Li-Polymer batteries
RM23.20
RM46.40
- Walk-In Price: RM65.00
- Warranty: 12 Months (T&C Apply)
- Arduino R3 Layout
- 802.11 b/g/n
- Wi-Fi Direct (P2P), soft-AP
- Integrated TCP/IP protocol stack
RM21.10
RM42.20
- Walk-In Price: RM72.5
- Warranty: 12 Months (T&C Apply)
- Mounts directly onto your Arduino
- 3.3V power regulation and MOSFET level shifting on-board
- 9x11 grid of 0.1" spaced prototyping holes
- Reset button brought out to shield
- Power, DIN, DOUT, RSSI and DIO5 indicator LEDs
RM22.60
RM45.20
- Walk-In Price: RM150
- Warranty: 12 Months (T&C Apply)
- Step Angle (degrees) : 0.9
- 2-Phase
- Rated Voltage: 3V
- Rated Current: 1.7A/Phase
- 5mm Diameter Drive Shaft
- Holding Torque: 48N.cm
- NEMA 17 form factor
RM21.75
RM43.50
- Walk-In Price: RM5.5
- Warranty: 12 Months (T&C Apply)
- Thermocouple Connector
- Perfect for bridging the gap between Type-K thermocouples with standard connectors with a PCB
- Each connector can easily attach to a printed circuit board with it’s included mounting clip
RM0.75
RM1.50
- Warranty: 12 Months (T&C Apply)
- 30mm x 16mm
- Works with our UHF RFID Readers and Writers
- Adhesive backing
RM13.80
- Walk-In Price: RM5.50
- Warranty: 12 Months (T&C Apply)
- Biomedical Sensor Pads, disposable electrodes that can be used to measure EEG, ECG and EMG levels.
- These little pads are perfect for short-term monitoring of Neurofeedback and Biofeedback purposes.
- They are to be used once and are very handy because of integrated, latex-free gel.
- Each pad adheres very well to the skin and the snap connector can be pushed on or removed from the electrode lead with no issue.
RM2.40
RM4.00
- Warranty: 24 Months (T&C Apply)
- A simple flex sensor 4.5" in length.
- As the sensor is flexed, the resistance across the sensor increases.
- Patented technology by Spectra Symbol
RM106.50
- Walk-In Price: RM144
- Warranty: 12 Months (T&C Apply)
- This is a piezoresistive force sensor from Tekscan.
- The harder you press, the lower the sensor’s resistance.
- Pressing hard, the resistance changes from infinite to ~300k.
- The sensor itself is thin and flexible, but the resistance does not change while being flexed.
RM119.30
- LPC2148 ARM7
- 512K user flash
- 10 available GPIO pins
- 2 Status LEDs
- microUSB Link LED
- External interrupt
- microSD socket
RM39.87
RM132.90
- Walk-In Price: RM134
- Warranty: 12 Months (T&C Apply)
- 12V motor
- 12W operation
- ¼" barbs
- 0-16" Hg vacuum range
RM51.65
RM103.30