
GYROS
-
Length:19mm/0.75in
-
Width:19mm/0.75in
-
Height:3.14mm/0.12in
-
Weight:1.27g/0.04oz
RM79.00
- 2.1V to 3.6V Supply Voltage
- Low power consumption - 0.15uA typical
- I2C interface
- Resolution: 0.04%RH, 0.02°C
- Accuracy: ±2%RH, ±3°C
RM28.90
- TSL12561 contains two integrating analog-to-digital converters (ADC) that integrate currents from two photodiodes, simultaneously.
- sophisticated light sensor
- TSL2561 measures both infrared and visible light to better approximate the response of the human eye
RM10.90
- Model: GY-271
- Chip: HMC5883L
- Power supply :3.3-5v
- Means of communication: IIC communication protocol
- Measuring range: ± 1.3-8 Gauss
RM9.50
- Easy to assemble and compatible with High Speed SMT Assembly
- Automatically maintains sensor's sensitivity under wide operating temperature range
- Maximizes sensor's full dynamic range and resolution
- I2C and SPI interface
RM21.20
RM26.50
- HMC5983 high-precision triaxial compass magnetic field sensor with temperature compensation
- Power supply: DC3-5V
- Automatic offset compensation;
- Heading angle accuracy of 1-2 degrees.
RM7.50
RM14.90
- Single tap/double tap detection
- Activity/inactivity monitoring
- Free-fall detection
- 10,000 g shock survival
- SPI (3- and 4-wire) and I2C digital interfaces
RM8.90
- Power supply: 3V-5V
- Illumination range :0-65535 lx
- The sensor built 16bit AD converter
- Direct digital output, complex calculation is omitted, omitting calibration
- Does not distinguish between ambient lights
- Close to the visual sensitivity of spectral characteristics
- 1 lux high-precision measurement of a wide range of brightness
- The standard NXP IIC communication protocol
- Built-in communication converter to connect directly to microcontroller io interface
RM7.50
- Type: GY - 302
- Size: 13.9 mm X 18.5 mm
- The original BH1750FVI ROHM chip
- Power supply: 3-5V
- Data range: 0-65535
- Sensor built-in and bitad converter
- Direct digital output, bypassing the complicated calculation, omit calibration
- Do not distinguish between ambient light
- Close to the visual sensitivity of spectral characteristics
- For a wide range of brightness for 1 lux high precision measurement
RM12.90
- Model: GY-35
- Chip: ENC-03RC
- Power supply: 3-5V
- Output: Analog Output
RM19.40
RM21.50
- High quality Immersion Gold pcb, machine welding process, quality assurance
- Name the: L3G4200D modules (three-axis gyroscope module)
- Using the chip: L3G4200D
- Power supply: 3-5V
- Means of communication: IIC / SPI communication protocol
- Measuring range: 250/500/2000 dps
RM12.00
RM15.00
- Onboard 3.3V Low Drop voltage regulator with input range of 3.6V to 6V.
- Logic supply voltage range of 1.8 to 3.3V. Logic supply pin is accessible through 9 pin header
- 2 x Mounting holes
- 3 magnetic field axis and 3 acceleration axis
- Full scale range of ± 1.3 to ±8.1 gauss magnetic field
- ±2g/±4g/±8g/±16g user selectable full-scale acceleration ranges
- 16 bit data output
- I2C serial interface
- Power-down mode/ low-power mode
- 2 independent programmable interrupt generators for free-fall and motion detection
- Embedded temperature sensor
- 6DOF orientation detection
RM20.90
- Use the chip: MPU-6050
- Power supply : 3-5v (internal low dropout regulator)
- Communication modes: standard IIC communication protocol
- Chip 16bit AD converter, 16-bit data output
- The gyroscopes range: ± 250 500 1000 2000 ° / s
- Acceleration range: ± 2 ± 4 ± 8 ± 16g
- Immersion Gold PCB, machine welding process to ensure quality
- Pin pitch 2.54mm
RM23.90
RM29.90
- Use the chip: MPU-6050
- Power supply :3-5v (internal low dropout regulator)
- Communication modes: standard IIC communications protocol
- Chip built-in 16bit AD converter, 16-bit data output
RM9.50
- Model: GY-61
- Chip: ADXL335
- Power supply: 3-5V
- Analog X, Y, Z three-axis output
RM14.90
- Chip: BMP085
- Power supply: 3-5v
- Communication Protocol: IIC
- Reaction time: 7.5ms
- Standby current: 0.1μA
RM26.90
RM29.90
- Chip: MPU-6500
- Power supply:3-5v (Internal low dropout regulator)
- Communication: Standard IIC communication protocol
- 16-bit AD converter for 16 output data
RM25.90
- Model: GY-652
- Chip: HMC5983 + BMP180
- Power supply :3-5v (internal low dropout regulator)
RM22.40
RM24.90
- 1.8V to 3.6V Supply Voltage
- Low power consumption - 0.5uA at 1Hz
- I2C interface
- Max I2C Speed: 3.5Mhz
RM14.90
- Model: HMC5883L+BMA180+ITG3205+BMP085 Module Fight Control Module
- Communication modes: standard IIC communication protocol (fully compatible with the system 3-5v)
- Machine welding process to ensure quality standard 2.54mm pin spacing
- Power supply:3-5v (internal low dropout regulator)
RM34.30
RM49.00
- 9-axis attitude sensor
- Gyro-chip 16bit AD converter, 16-bit data output
- Using chips: LSM303DLH + MPU-3050
- Power supply: 3-5v (internal low dropout regulator)
- Communication: Standard IIC communication protocol (fully compatible with 3 - 5V system)
RM20.60
RM68.50
- 9 axis module
- Immersion Gold PCB process
- Chip: ITG3205 + ADXL345 + HMC5883L
- Power Supply :3-5v
RM35.60
RM39.50
- Power supply: 3V-5VDC
- Chip: MPU-605
- MPU 6050 Motion sensor module: 3-axis gyroscope + 3-axis accelerometer
- HMC5883L module (three-axis magnetic field module)
- BMP085 barometer pressure sensor
RM69.00
- Operating voltage: 2.5 V to 5.5 V
- Supply current: 8mA
- Output format (I2C/SPI)
RM49.90
- Chip: MPU-9250
- Power supply:3-5v (internal low dropout regulator)
- Communication: IIC communication protocol standard
- 16-bit AD converter for 16 output data
- 2.54mm pin pitch
RM25.90
- Onboard LDO chip, support 5V / 3.3V voltage input; 2.54mm pin lead out;
- Support standard IIC communication protocol, built-in AD converter, 16 bit data output;
- Programmable control accelerator full scale range +/- 2g, +/-4g, +/-8g and +/-16g;
RM12.90
- 2.0-3.6VDC Supply Voltage
- Ultra Low Power: 40uA in measurement mode, 0.1uA in standby@ 2.5V
- Tap/Double Tap Detection
- Free-Fall Detection
- SPI and I2C interfaces
RM34.50