General
FREE SHIPPING to Peninsular Malaysia for orders over RM39.00
General
Sort by
Show result
  • Glass Fuse (Glass Body, Nickel Plated Cap)
  • 0.5A / 250V
  • Diameter: 5 x 20 mm
RM0.25
  • Input voltage : 3 to 35V DC ( Note : Onboard Voltmeter no display when input voltage less than 4V )
  • Input current : 9A (max)
  • Output voltage : 3.5 ~ 35V DC ( Output voltage > = Input voltage)
  • Output current : 6A (max)
  • Conversion efficiency : 96% ( Highest )
  • Output ripple : 40mV (TYP)
  • Onboard voltmeter range : 4 ~ 40V ; Tolerance : +/-0.1V
  • Dimension : 6.75 x 4.15 x 1.4 cm
RM27.90
  • Glass Fuse (Glass Body, Nickel Plated Cap)
  • 15A / 250V
  • Diameter: 5 x 20 mm
RM0.25
  • 75W High Power DC Adjustable Step Down Voltage Regulator Module
  • Built With Digital Display 
  • Input Voltage : 4.0-38V
  • Output Voltage : 1.25-36V 
  • Output Current : 5A (MAX) 
RM19.50
  • Input Voltage: 0.9 V - 5 V
  • Output Voltage: 5 V
  • Duty ratio coefficient: 66% - 78%
  • Input interface: PH2.0; KF235-3.81-2P
  • Output interface: USB
RM19.00
  • LM2596 Step Down (New Model)
  • Built With Digital Display
  • Input Voltage : DC 2.5~36V
  • Output Voltage : 1.25V~35V 
  • Output Current : 2A (Recommend), 3A Max
  • Conversion Efficiency: <= 92%  
  • Operating Temperature: -45℃ to +85℃
RM13.90
  • Input voltage: 0.9-5VDC
  • Output voltage: 5VDC
  • Output Current: 500-600mA
  • Build in work light 
RM9.50
  • 4A Switching Power High-Performance Boost Module
  • Input range: 3V to 32V 
  • Output range: 5V to 35V 
  • Maximum output current: 4A
  • Output Ripple: 50mV 
  • Conversion efficiency: <94% ( Lower efficiency when higher pressure difference occur ) 
RM15.50
  • Glass Fuse (Glass Body, Nickel Plated Cap)
  • 10A / 250V
  • Diameter: 5 x 20 mm
RM0.25
  • Operating Voltage : DC12V, 0.16A
  • 5 Blade Design 
  • Good air flow & Low noise
  • Weight : 0.011 kg (with screw)
  • Dimension : 3.00 x 3.00 x 1.2(cm)
RM7.20
RM8.00
  • Glass Fuse (Glass Body, Nickel Plated Cap)
  • 1A / 250V
  • Diameter: 5 x 20 mm
RM0.25
  • Model: 5015S
  • Voltage: 24V
  • Current: 0.1A
  • Speed: 6000 +/- 10% RPM 
  • Power: 2.4W
RM9.90
  • Glass Fuse (Glass Body, Nickel Plated Cap)
  • 2A / 250V
  • Diameter: 5 x 20 mm
RM0.25
  • High quality aluminum heatsink/heat sink holder
  • For 12mm laser modules like 12mm red, green and IR laser modules
  • Help to cool the laser to prolong the working time of laser mdoules
RM34.90
  • Glass Fuse (Glass Body, Nickel Plated Cap)
  • 3A / 250V
  • Diameter: 5 x 20 mm
RM0.25
  • Glass Fuse (Glass Body, Nickel Plated Cap)
  • 4A / 250V
  • Diameter: 5 x 20 mm
RM0.25
  • Glass Fuse (Glass Body, Nickel Plated Cap)
  • 5A / 250V
  • Diameter: 5 x 20 mm
RM0.25
  • Glass Fuse (Glass Body, Nickel Plated Cap)
  • 8A / 250V
  • Diameter: 5 x 20 mm
RM0.25
  • High quality aluminum heatsink/heat sink holder
  • For 10mm laser modules
  • Inner diameter of this one is 10.5mm
  • Two bolts on the top to fix the laser
RM22.00
  • Model: 6061-T5 plate
  • Material: Aluminium 
  • Surface: Black Anodize
RM19.50
  • Size: 0.3mm orifice
  • Operating pressure: 20-70 kg/cm
  • Flow rate: 80-145 ml/min
  • Minimum water use: 1/2 gallon of water per hour per nozzle
  • 3-7 microns is Fog size
RM3.90
  • Type: Cross
  • Voltage: 2.8-5.2V
  • Output wavelength: 650nm
RM19.90
  • Perfect for DIY project
  • low cost Red Laser Diode in Copper Casing
  • Can be used to connect diode tubes for multiple use
RM1.50
  • Type: Dot
  • Voltage: 2.8-5.2V
  • Output wavelength: 650nm
RM19.90
  • Mounting hole diameter: 3.5mm

  • Mounting hole pattern: Square 15.8mm (along the length) x 23.8mm (along the width)

  • Fits lasers with up to 12.2mm diameter

RM15.00
  • Dimensions: 24mm x 20mm x 9.8mm
  • Weight: G.W 7g
  • Operating Voltage: 4-8V
  • Sound Output - ≥85dB
  • Resonant Frequency - 2300±300Hz
RM8.00
  • Grove compatible interface
  • 3.3V/5V Compatible
  • Battery: Exclude
RM10.40
RM11.50
  • Dimensions: 20mm x 20mm x 18mm
  • Weight: G.W 7g
  • Battery: Exclude
  • Operate Voltage:3.3v / 5v
RM10.40
RM11.50
  • Conductive liquid/film
  • Coating on a 1mm glass sheet
  • LCD/OLED manufacture
  • ITO layer on one side, 1850Å thick
  • 10-15 Ω per sq inch
RM40.00
  • Conductive liquid/film
  • Coating on a flexible plastic (PET) sheet
  • LCD/OLED manufacture
  • ITO layer on one side
RM59.00