RELAY MODULES
- Model : SRD-12VDC-SL-A
- 4-pins
- Input Signal : 12VDC
- Output Load : 10A,250VAC ; 10A,30VDC
RM1.50
- Brand: SONGLE
- Model : SRD-12VDC-SL-C
- 5-pins SPDT
- Input Signal : 12VDC
- Output Load : 10A,250VAC ; 10A,30VDC
- UL,CUL,TUV Recognized
RM1.50
- Brand: SONGLE
- Model : SRD-24VDC-SL-C
- 5-pins SPDT
- Input Signal : 24VDC
- Output Load : 10A,250VAC ; 10A,30VDC
- UL,CUL,TUV Recognized
RM1.50
- Brand: SONGLE
- Model : SRD-03VDC-SL-C
- 5-pins SPDT
- Input Signal : 3VDC
- Output Load : 10A,250VAC ; 10A,30VDC
- UL,CUL,TUV Recognized
RM1.50
- Brand: SONGLE
- Model : SRD-05VDC-SL-C
- 5-pins SPDT
- Input Signal : 5VDC
- Output Load : 10A,250VAC ; 10A,30VDC
- UL,CUL,TUV Recognized
RM1.50
- Brand: SONGLE
- Model : SRD-09VDC-SL-C
- 5-pins SPDT
- Input Signal : 9VDC
- Output Load : 10A,250VAC ; 10A,30VDC
- UL,CUL,TUV Recognized
RM1.50
- Operating Trigger Voltage: 5V DC
- Maximum Conducting Voltage: AC 250V@10A, DC 30V@10A
- Build with Power LED Indicator
- With Jumper Cap for switchable logic: Active Low / Active High
RM5.50
- Voltage: 12V DC
- Channel: 16
- Max Conducting Voltage: AC 250V@10A, DC 30V@10
- Used to control various appliances and equipment with large current such as Motor, DC/AC Load, Lights and etc
RM45.00
- Voltage: 5V
- Channel: 16
- Uses two 8-channel ULN2803APG darlington arrays chip to control relay module.
- Support all MCU driven
- Standard interface can be directly connected with microcontrollers
RM45.00
- 2 Channel Relay Module with Opto-coupler
- Used to control various appliances and equipment with large current such as Motor, DC/AC Load , Lights and etc
- Standard interface that can be controlled directly by microcontroller, Arduino, Raspberry Pi and etc
RM5.90
- 4 Channel Relay Module with Opto-coupler
- Used to control various appliances and equipment with large current such as Motor, DC/AC Load, Lights and etc
- Operating Trigger Voltage: 12V DC
- Maximum Conducting Voltage: AC 250V@10A, DC 30V@10
RM13.90
- 4 Channel Relay Module with Opto-coupler
- Used to control various appliances and equipment with large current such as Motor, DC/AC Load , Lights and etc
- Standard interface that can be controlled directly by microcontroller, Arduino, Raspberry Pi and etc
RM7.90
- 6 Channel Relay Module with Opto-coupler
- Used to control various appliances and equipment with large current such as Motor, DC/AC Load , Lights and etc
- Standard interface that can be controlled directly by microcontroller, Arduino, Raspberry Pi and etc
RM23.50
- 6 Channel Relay Module with Opto-coupler
- Used to control various appliances and equipment with large current such as Motor, DC/AC Load , Lights and etc
- Standard interface that can be controlled directly by microcontroller, Arduino, Raspberry Pi and etc
RM23.50
- 8 Channel Relay Module with Opto-coupler
- Used to control various appliances and equipment with large current such as Motor, DC/AC Load, Lights and etc
- Operating Trigger Voltage: 12V DC
- Maximum Conducting Voltage: AC 250V@10A, DC 30V@10
RM26.90
- 8 Channel Relay Module
- Used to control various appliances and equipment
- Standard interface
- can be controlled directly
- Operating Voltage 5V DC
RM26.00
- Non-latching type relay
- Voltage: Up to 250VAC
- Can handle a beefy 1200 Watts
- Switch up to 10A of resistive-load current at 120VAC, 5A at 240VAC
RM59.00
- Max. switching voltage: 400VAC(NO)
- Max. switching current: 16A
- Max. switching power: 4700VA
RM43.50
- Single relay board
- Rated through-current: 10A (NO) 5A (NC)
- Maximum switching voltage: 150VAC 24VDC
RM19.20
RM24.00
- Model: MY4NJ HH54P
- Terminal: 4PDT
- Coil Voltage: 12VDC
- Contact Current: 5A
- Number of Pin: 14
- For general purpose
RM4.00
- Operating voltage: 12VDC
- Using photosensitive resistance induction light intensity, built-in relay, direct control of the load
- Using the LM393 wide voltage comparator
RM24.90
- Raspberry Pi compatible
- Interface:IIC , Three hardware SW1 (1, 2, 3) select the fixed I2C-bus address
- Relay screw terminals
- Standardized shield shape and design
- LED working status indicators for each relay
- COM, NO (Normally Open), and NC (Normally Closed) relay pins for each relay
RM125.00
- Powerful auxiliary weapons in RC combat tournament.
- Glow plugs on nitro RC vehicles.
- High powered lighting system on RC aircraft, boats and cars.
- Domestic appliances and home automation.
- Non-critical automotive electrics like glow wire.
RM39.00
-
Arduino/Seeeduino Shield compatible
-
Relay screw terminals
-
Working status indicators for each relay
-
High quality relays
-
Provides NO/NC interfaces
RM82.00
- Supports Raspberry Pi A+/B+/2B/3B/3B+
- High quality relays, loads up to 5A 250V AC or 5A 30V DC
- Photo coupling isolation, prevent interference from high voltage circuit
- Onboard LEDs for indicating relays status
RM80.00
- Rated Load Current: 40A
- Input Voltage: DC 3-32V
- Output Voltage: AC 24-380V
RM16.00
- Rated Load Current: 75A
- Input Voltage :DC 3-32V
- Output voltage: AC 24-380V
RM25.00
- Brand: SONGLE
- Model : SLA-24VDC-SL-A
- 4-pins SPDT
- Input Signal : 24VDC
- PCB Type
- 30AMPS 250VAC/30VDC
RM8.50
- TTL Control Signal: 5VDC to 12VDC
- Max AC: 10A 250V AC
- Max DC: 10A 30V DC
- Contact Type: NC and NO
RM3.60
RM4.00