General
- Glass Fuse (Glass Body, Nickel Plated Cap)
- 0.5A / 250V
- Diameter: 5 x 20 mm
RM0.25
- Input voltage : 3 to 35V DC ( Note : Onboard Voltmeter no display when input voltage less than 4V )
- Input current : 9A (max)
- Output voltage : 3.5 ~ 35V DC ( Output voltage > = Input voltage)
- Output current : 6A (max)
- Conversion efficiency : 96% ( Highest )
- Output ripple : 40mV (TYP)
- Onboard voltmeter range : 4 ~ 40V ; Tolerance : +/-0.1V
- Dimension : 6.75 x 4.15 x 1.4 cm
RM27.90
- Glass Fuse (Glass Body, Nickel Plated Cap)
- 15A / 250V
- Diameter: 5 x 20 mm
RM0.25
- 75W High Power DC Adjustable Step Down Voltage Regulator Module
- Built With Digital Display
- Input Voltage : 4.0-38V
- Output Voltage : 1.25-36V
- Output Current : 5A (MAX)
RM19.50
- Input Voltage: 0.9 V - 5 V
- Output Voltage: 5 V
- Duty ratio coefficient: 66% - 78%
- Input interface: PH2.0; KF235-3.81-2P
- Output interface: USB
RM19.00
- LM2596 Step Down (New Model)
- Built With Digital Display
- Input Voltage : DC 2.5~36V
- Output Voltage : 1.25V~35V
- Output Current : 2A (Recommend), 3A Max
- Conversion Efficiency: <= 92%
- Operating Temperature: -45℃ to +85℃
RM13.90
- Input voltage: 0.9-5VDC
- Output voltage: 5VDC
- Output Current: 500-600mA
- Build in work light
RM9.50
- 4A Switching Power High-Performance Boost Module
- Input range: 3V to 32V
- Output range: 5V to 35V
- Maximum output current: 4A
- Output Ripple: 50mV
- Conversion efficiency: <94% ( Lower efficiency when higher pressure difference occur )
RM15.50
- Glass Fuse (Glass Body, Nickel Plated Cap)
- 10A / 250V
- Diameter: 5 x 20 mm
RM0.25
- Glass Fuse (Glass Body, Nickel Plated Cap)
- 1A / 250V
- Diameter: 5 x 20 mm
RM0.25
- Glass Fuse (Glass Body, Nickel Plated Cap)
- 2A / 250V
- Diameter: 5 x 20 mm
RM0.25
- High quality aluminum heatsink/heat sink holder
- For 12mm laser modules like 12mm red, green and IR laser modules
- Help to cool the laser to prolong the working time of laser mdoules
RM34.90
- Glass Fuse (Glass Body, Nickel Plated Cap)
- 3A / 250V
- Diameter: 5 x 20 mm
RM0.25
- Glass Fuse (Glass Body, Nickel Plated Cap)
- 4A / 250V
- Diameter: 5 x 20 mm
RM0.25
- Glass Fuse (Glass Body, Nickel Plated Cap)
- 5A / 250V
- Diameter: 5 x 20 mm
RM0.25
- Glass Fuse (Glass Body, Nickel Plated Cap)
- 8A / 250V
- Diameter: 5 x 20 mm
RM0.25
- High quality aluminum heatsink/heat sink holder
- For 10mm laser modules
- Inner diameter of this one is 10.5mm
- Two bolts on the top to fix the laser
RM22.00
- Model: 6061-T5 plate
- Material: Aluminium
- Surface: Black Anodize
RM19.50
- Size: 0.3mm orifice
- Operating pressure: 20-70 kg/cm
- Flow rate: 80-145 ml/min
- Minimum water use: 1/2 gallon of water per hour per nozzle
- 3-7 microns is Fog size
RM3.90
- Type: Cross
- Voltage: 2.8-5.2V
- Output wavelength: 650nm
RM19.90
- Perfect for DIY project
- low cost Red Laser Diode in Copper Casing
- Can be used to connect diode tubes for multiple use
RM1.50
- Type: Dot
- Voltage: 2.8-5.2V
- Output wavelength: 650nm
RM19.90
-
Mounting hole diameter: 3.5mm
-
Mounting hole pattern: Square 15.8mm (along the length) x 23.8mm (along the width)
-
Fits lasers with up to 12.2mm diameter
RM15.00
- Dimensions: 24mm x 20mm x 9.8mm
- Weight: G.W 7g
- Operating Voltage: 4-8V
- Sound Output - ≥85dB
- Resonant Frequency - 2300±300Hz
RM8.00
- Dimensions: 20mm x 20mm x 18mm
- Weight: G.W 7g
- Battery: Exclude
- Operate Voltage:3.3v / 5v
RM10.40
RM11.50
- Conductive liquid/film
- Coating on a 1mm glass sheet
- LCD/OLED manufacture
- ITO layer on one side, 1850Å thick
- 10-15 Ω per sq inch
RM40.00
- Conductive liquid/film
- Coating on a flexible plastic (PET) sheet
- LCD/OLED manufacture
- ITO layer on one side
RM59.00
- Type: Line
- Voltage: 2.8-5.2V
- Output wavelength: 650nm
RM19.90