DEVELOPMENT TOOLS
FREE SHIPPING to Peninsular Malaysia for orders over RM39.00
DEVELOPMENT TOOLS
DEVELOPMENT TOOLS
Sort by
Show result
  • 5V voltage regulator (1A max)
  • 20MHz oscillator
  • Reset button
RM28.00
RM35.00
  • Industrial grade PCB.
  • Every board is being tested before it is shipped out.
  • Compact platform and breadboard-friendly
  • Suitable for hobbyists and expert.
RM29.20
RM36.50
  • CSP connector for UIC00B -simple and fast method to load program.
  • Perfect fit for 40 pins PIC16F and PIC18F.
  • Operating Voltage Range: 7V - 15VDC
RM42.00
  • Microcontroller: NUC131LD2AE
  • (32-bit ARM Cortex-M0)
  • Operating voltage: 5VDC 
  • Flash size (program memory): 64KB
  • SRAM size: 8KB
  • Digital IO: 20
RM70.00
  • Cooling fan for Jetson Nano Developer Kit
  • Connector: 4Pin Reverse Proof Connector
  • Spec: 5V, PWM adjustment
RM15.00
  • Arduino reset button
  • 4 x G15 Cube Servo ports.
  • (Rev2.0 does not come with Dynamixel port).
  • External power port for servo with polarity protection
  • Stackable I/O header pin
RM24.00
RM30.00
  • Power supply: +5V
  • Working current: 25μA
  • Working temperature: -25~125℃
  • Detectable wall thickness: 1~13mm(0.40"x5.12")
RM69.50
  • Plug & Play
  • Working Current(Max): 5VDC 0.4A
  • Support Input Resolution(Max): 4K (3840×2160@30Hz)
  • Input Output Resolution(Max): 1080P
  • Support Android, Windows, Raspbian and macOS
RM49.60
  • Designed as a programmer’s output socket adapter 
  • Each of them has their own standard connection
  • Use any programmer regardless of the development board
RM8.00
RM10.00
  • Development board specially designed to do just that
  • Act as a USB host and supply charging current to your device
  • IOIO-OTG will assume device mode and present itself as a virtual serial port
  • Can be upgraded without needing a programmer using the IOIODude application
  • Fixed the problems that plagued the previous version making it a true vision of how the board is intended
RM115.50
RM165.00
  • 5V DC power supply
  • USB Type-C
  • ESP32-based
RM150.00
  • Input voltage: 6 - 12V DC or USB power
  • Output voltage: 3.3V, 5V switchable
  • Max of output current: <700mA
  • Independent control
  • Can be switched to 0V, 3.3V and 5V
  • Suitable for MB-102 400 and 830 solderless breadboard
RM3.50
  • ESP32 SoC (System on Chip) with WiFi and Bluetooth BLE
  • 40MHz Crystal for CPU, 32.768KHz for RTC and low power operation
  • 4MB Flash (32MBit)
  • FTDI231 for the USB to Serial communication
  • Auto-reset for automatic flash of new program
RM99.00
  • PL-05N
  • Type: NPN
  • Size: Square type
  • Waterproof and anti-jamming 
  • Sensing distance: 5mm
RM15.00
  • Shield Function: Adapter Prototype
  • Stackable header
  • Dimension: 74.93mm x 81.28mm
RM30.00
  • Input voltage: DC7-15V.
  • 1A (maximum) 5V voltage regulator.
  • 500mA (maximum) 3.3V voltage regulator.
  • 0-5V outputs with 3.3V compatible inputs.
  • 14 Digital I/O Pins (6 PWM outputs).
  • 6 Analog Inputs.
RM57.00
RM60.00
  • Stable Power Supply
  • Magnetic coupling resonance technique
  • Insulation Coil
  • Compact Design
RM38.50
  • Microcontroller: Atmel Atmega328-20AU
  • Operating Voltage (logic level): 5V
  • Input Voltage (recommended): 7-12V
  • Input Voltage (limits): 6-20V
  • Digital I/O Pins: 14 (of which 6 provide PWM output)
  • Analog Input Pins: 8
  • DC Current per I/O Pin: 40 mA
RM95.00