FREE SHIPPING to Peninsular Malaysia for orders over RM39.00
We will be disable retail service during MCO. But no worry, you still can place order from our online store. All orders will be ship out via courier service. Stay home and Shop safely ♥
Sort by
Show result
  • Walk-In Price: RM18.5
  • Warranty: 1 Month (T&C Apply)
  • Breakout board for DRV8825 microstepping bipolar stepper motor driver
  • Simple step and direction control interface
  • 6 different step resolutions
  • Walk-In Price: RM16.5
  • Warranty: 1 Month (T&C Apply)
  • Supply range: 2.0V - 5.5V
  • Current consumption: Low
  • Programmable data rate: 8SPS to 860SPS
  • Battery monitoring: up to 125°C
  • Specificed temperature: 40°C
  • Jumpers Selectable:  I2C 7-bit adresses
  • Walk-In Price: RM3
  • Warranty: 1 Month (T&C Apply)
  • Logic level shifter Bi-Directional with 4 channels between high logic voltage and low logic voltage
  • Each level converter has the capability of converting 4 pins on the high side to 4 pins on the low side with two inputs and two outputs provided for each side
  • This 4 channels bi-directional logic level converter is a small device that safely steps down 5V signals to 3.3V and steps up 3.3V to 5V at the same time
  • Walk-In Price: RM32
  • Warranty: 12 Months (T&C Apply)
  • This level shifter board combines the ease-of-use of the bi-directional TXB0108 with an I2C-compatible FET design following NXP's app note.
  • This breakout has 4 BSS138 FETs with 10K pullups.
  • It works down to 1.8V on the low side, and up to 10V on the high side.
  • Walk-In Price: RM44.00
  • Warranty: 12 Months (T&C Apply)
  • Working voltage: 3~5v
  • I2C Digital-output of 6 or 9-axis MotionFusion data in rotation matrix, quaternion, Euler Angle, or raw data format
  • Tri-Axis angular rate sensor (gyro) with a sensitivity up to 131 LSBs/dps and a full-scale range of ±250, ±500, ±1000, and ±2000dps
  • Tri-Axis accelerometer with a programmable full scale range of ±2g, ±4g, ±8g and ±16g
  • Walk-In Price: RM12.5
  • Warranty: 1 Month (T&C Apply)
  • Solve the connection for 3.3V and 5V system
  • Convert 5V to 3.3V & 3.3V to 5V at same time
  • Able to work with 2.8V and 1.8V devices
  • Conversion level range: 1.8V-6V
  • Walk-In Price: RM60
  • Warranty: 12 Months (T&C Apply)
  • This chip perform bidirectional level shifting from pretty much any voltage to any voltage
  • It will auto-detect the direction
  • Only thing that doesn't work well with this chip is i2c
  • Walk-In Price: RM204
  • Warranty: 12 Months (T&C Apply)
  • Absolute Orientation 
  • Absolute Orientation 
  • Angular Velocity Vector 
  • Acceleration Vector 
  • Magnetic Field Strength Vector 
  • Linear Acceleration Vector
  • Walk-In Price: RM275
  • Warranty: 12 Months (T&C Apply)
  • 8x8 Array of IR Thermal Sensors
  • Temperatures Ranging: 0°C to 80°C
  • Accuracy: +- 2.5°C (4.5°F)
  • Maximum Frame Rate: 10Hz
  • Walk-In Price: RM134
  • Warranty: 12 Months (T&C Apply)
  • No Arduino or other microcontroller required! It is completely stand-alone, just needs a 3 to 5.5VDC battery
  • Small - only 1.5" x 0.9"
  • Built in storage - yep! you don't even need an SD card, there's 16MB of storage on the board itself
  • Walk-In Price: RM39
  • Warranty: 12 Months (T&C Apply)
  • Bi-polar or uni-polar stepper with up to 1.2A per channel using the DRV8833

  • Size: 26mm x 18mm x 3mm / 1.0" x 0.7" x 0.1"

  • Weight: 1.5g

  • Walk-In Price: RM90
  • Warranty: 12 Months (T&C Apply)
  • Extremely Accurate I²C-Integrated RTC/TCXO/Crystal

  • 23mm x 17.6mm x 7.2mm / 0.9" x 0.7" x 0.28"

  • Weight: 2.1g

  • Walk-In Price: RM115
  • Warranty: 12 Months (T&C Apply)
  • ATSAMD21G18 @ 48MHz with 3.3V logic/power
  • 3.3V regulator with 500mA peak current outpu0t
  • USB native support, comes with USB bootloader and serial port debugging
  • You also get tons of pins - 20 GPIO pins
  • Hardware Serial, hardware I2C, hardware SPI support
  • Walk-In Price: RM46
  • Warranty: 12 Months (T&C Apply)
  • MAX98357A
  • Product Dimensions: 19.4mm x 17.8mm x 3.0mm
  • Product Weight: 1.2g
  • Walk-In Price: RM32
  • Warranty: 12 Months (T&C Apply)
  • Output Power: 2.5W at 4Ω, 10% THD, 1.5W at 8Ω, 10% THD, with 5.5V Supply
  • 50dB PSRR at 1KHz
  • Filterless design, with ferrite bead + capacitors on output
  • Walk-In Price: RM39
  • Warranty: 12 Months (T&C Apply)
  • PCB & header are included
  • Plugs into any breadboard, or you can use wires
  • Two mounting holes
  • Will keep time for 5 years or more
  • Walk-In Price: RM70
  • Warranty: 12 Months (T&C Apply)
  • It has a nice standard 0.1"x0.1" prototying grid with big pads
  • Comes with Stacking headers and plain header, choose whichever you want when soldering together
  • A IC pattern for adding DIP ICs up to 20 pins
  • Power rails down the middle and sides
  • A reset button and an extra general use button
  • Walk-In Price: RM134
  • Warranty: 12 Months (T&C Apply)
  • Packet radio with ready-to-go Arduino libraries
  • Uses the amateur or license-free ISM band (ITU "Europe" license-free ISM or ITU "American" amateur with limitations)
  • Use a simple wire antenna or spot for uFL or SMA radio connector
  • SX1276 LoRa® based module with SPI interface
  • Walk-In Price: RM49
  • Warranty: 12 Months (T&C Apply)
  • With an ATmega328p chip or SAMD21 or even SAMD51
  • This shield will make usage a snap
  • Light soldering to attach the headers, connector and terminal block
  • Able to attach any RGB matrix with ease
  • This shield just takes care of the wiring for you
  • Walk-In Price: RM104
  • Warranty: 12 Months (T&C Apply)
  • Based on the best-of-class Si4713
  • All-in-one stereo audio FM transmitter that can also transmit RDS/RBDS data
  • Wire up to your favorite microcontroller to the I2C data lines
  • Walk-In Price: RM39
  • Warranty: 12 Months (T&C Apply)
  • Stand-alone breakout that will turn any electronics into low-power electronics
  • Product Dimensions: 19.3mm x 18.0mm x 4.5mm / 0.8" x 0.7" x 0.2"
  • Product Weight: 1.3g / 0.0oz


  • Walk-In Price: RM85
  • Warranty: 12 Months (T&C Apply)
  • Internal temperature reading
  • 3.3 to 5v power supply and logic level compliant!
  • SPI data requires any 4 digital I/O pins
  • Walk-In Price: RM360
  • Warranty: 12 Months (T&C Apply)
  • Arduino compatible (recognized as an Arduino Leonardo in IDE)
  • Atmel ATMega32U4 Microprocessor
  • Freescale MPR121 dedicated touch interface
  • VLSI VS1053B audio processor
  • Arduino Shield Compatible (check pins available)
  • Walk-In Price: RM67.3
  • Warranty: 12 Months (T&C Apply)
  • Bluetooth chip:TI CC2540    
  • Frequency: 2.4GHz
  • Transfer rate:  ≤1Mbps
  • Modulation: GFSK, bluetooth low power, V4.0
  • Power consumption: working:10.6mA average ,ready mode:8.7mA 
  • Sensitivity: -93dB
  • Walk-In Price: RM90
  • Warranty: 12 Months (T&C Apply)
  • Establish an easy to use wireless link 
  • Works by simulating a UART device 
  • No big contracts to sign
  • No major hoops that you have to jump through
  • Great choice compared to classic Bluetooth
  • Walk-In Price: RM4.5
  • Warranty: 12 Months (T&C Apply)
  • For 2020 PCB Connector 8 ways
  • Pre-soldered with the male connector
  • It converts the signal pins to standard of 0.1"
  • Walk-In Price: RM10
  • Warranty: 12 Months (T&C Apply)
  • Breakout Board PS2 Connector
  • PS2 Connector (Female)
  • Pins are broken out to 0.1"
  • Walk-In Price: RM6.4
  • Warranty: 12 Months (T&C Apply)
  • Designed to fit SPG10 DC brushed motor
  • Tiny, compact and useful
  • Require two points soldering
  • Walk-In Price: RM8
  • Warranty: 1 Month (T&C Apply)
  • Operating Voltage: 2V to 6V
  • "On" resistance: 70 Ohms @ 4.5V
  • 6ns break-before-make @ 4.5V
  • Analog signal input: C0-C15, 16 Channels
  • Walk-In Price: RM14.5
  • Warranty: 1 Month (T&C Apply)
  • Real-time clock (RTC) to maintain the time, even when the a rduino is unplugged. Backup battery lasted for many years
  • Including SD card and RTC libraries and sample code means you can get fast
  • Welded joints, circuits or sensors prototyping area.