ELECTRONIC COMPONENTS
FREE SHIPPING to Peninsular Malaysia for orders over RM39.00
ELECTRONIC COMPONENTS
ELECTRONIC COMPONENTS
Sort by
Show result
  • For humidifier and Mist Generator
  • Material: Corrosion resistance ceramic disc
  • Diameter: 20mm
RM4.00
  • Type: 12 Position
  • Rating: 380V 10A
  • Inlet Diameter: 4mm
  • Material: PE
RM1.80
  • Adopt optocoupler
  • 4 channel
  • Limit Conversion Frequency: 20KHz
  • Mounting bracket for DIN rail
  • It can be used for signal isolation
RM30.00
  • Adopt optocoupler
  • 4 channel
  • Limit Conversion Frequency: 20KHz
  • Mounting bracket for DIN rail
  • It can be used for signal isolation
RM30.00
  • Adopt optocoupler
  • 4 channel
  • Limit Conversion Frequency: 20KHz
  • Mounting bracket for DIN rail
  • It can be used for signal isolation
RM30.00
  • Adopt optocoupler
  • 8 channel
  • Limit Conversion Frequency: 20KHz
  • Mounting bracket for DIN rail
  • It can be used for signal isolation
RM65.00
  • Material: Acrylic
  • Color: Transparent
  • Included Acrylic Camera Bracket for Camera Module
  • Compatible with NVIDIA Jetson Nano Development Board (A02 & B01)
RM25.00
  • Model: 6061-T5 plate
  • Material: Aluminium 
  • Surface: Black Anodize
RM19.50
  • Microcontroller: NUC131LD2AE
  • (32-bit ARM Cortex-M0)
  • Operating voltage: 5VDC 
  • Flash size (program memory): 64KB
  • SRAM size: 8KB
  • Digital IO: 20
RM70.00
  • Size: 0.3mm orifice
  • Operating pressure: 20-70 kg/cm
  • Flow rate: 80-145 ml/min
  • Minimum water use: 1/2 gallon of water per hour per nozzle
  • 3-7 microns is Fog size
RM3.90
  • On board Main power switch
  • On board Vin polarity protection
  • Vin is extended out breadboard
RM18.00
  • Coated with silver to make it fully conductive
  • Each order ships with three inches of BOTH halves
  • Its easily sewn or cut
RM45.00
  • Use it to connect various electronics onto clothing projects
  • Made from Stainless Steel Fibers
  • Resistance: 28 Ohms/ft
RM230.00
  • Material : 12UM Stainless steel fiber
  • Gram Weight:0.2458g/m
  • Strength:2.8KGF
RM25.00
  • Type: Cross
  • Voltage: 2.8-5.2V
  • Output wavelength: 650nm
RM19.90
  • Cooling fan for Jetson Nano Developer Kit
  • Connector: 4Pin Reverse Proof Connector
  • Spec: 5V, PWM adjustment
RM15.00
  • Type: Dot
  • Voltage: 2.8-5.2V
  • Output wavelength: 650nm
RM19.90
  • 5-12VDC and the stainless steel fibers in this heating fabric will warm up
  • Creating a little heating pad
  • One hand just a gigantic resistor
  • Other hand is flexible, light, and can be wrapped around a project
  • Designed for portable wearable heating pads
RM35.00
  • Power supply: +5V
  • Working current: 25μA
  • Working temperature: -25~125℃
  • Detectable wall thickness: 1~13mm(0.40"x5.12")
RM69.50
  • For use with: TO-220
  • Dimensions: 15x10x20mm
  • Color: Black
RM1.50
  • Plated with real Silver and super luxe 
  • Use small pieces on the tips of gloves 
  • In any soft circuit situation where you need a bit of stretch
  • Resistance of less than 1 ohm per foot 
  • Used to make soft keypads and capacitive touch sensors, as well as soft "squeeze" switches
RM59.50
  • 63% cotton, 35% silver yarn and 2% spandex
  • Use small pieces for soft switches, plush keypads, capacitive touch sensors, and other textile interfaces
  • Very soft and matte, perfect for ironing onto wearables with double sided interfacing
  • Different resistance in each direction
  • Comprised of a single strand of fiber that travels back and forth across the fabric
RM59.50
  • Type: Line
  • Voltage: 2.8-5.2V
  • Output wavelength: 650nm
RM19.90
  • LT1 - Low Voltage Transmitter Channel 1 ----HT1 - High Voltage Transmitter Channel 1
  • LR1 - Low Voltage Receiver Channel 1 ----HR1 - High Voltage Receiver Channel 1
  • LT2 - Low Voltage Transmitter Channel 2 ---- HT2 - High Voltage Transmitter Channel 2
  • LR2 - Low Voltage Receiver Channel 2 ---- HR2 - High Voltage Receiver Channel 2
RM7.50
  • Metal case for Jetson Nano Developer Kit
  • Easy access to the peripheral connectors
  • With camera holder, RESET and POWER buttons
RM69.50
  • Standard Cat5 Cat6 RJ45 Network Cable Connector
  • 8 Contacts (8P 8C) For 8 Wire Connections
  • Suitable For CAT5, CAT 5E, CAT 6 And CAT6E
  • Compatible With Standard RJ45 Sockets
  • Gold Plated Pins Inside Connectors
RM0.70
  • Equips Arduino with mass-storage capability
  • Communication with microSD cards is achieved over an SPI interface
  • Populated with a microSD socket, red power indicator LED, and a reset button
RM65.00
  • Utilizing the MAX232 level shifter.
  • Comes with DB9-Male (PC Side) Connector.

  • Can be used together with the UC00A or UC00B to be a USB to RS232 Converter.

  • Support Tx, Rx, CTS and RTS pin.

RM21.00
  • Stable Power Supply
  • Magnetic coupling resonance technique
  • Insulation Coil
  • Compact Design
RM38.50
  • Sold in 20cm x 20cm pieces
  • 1 ohm per foot resistance
  • Silver-plated nylon
  • Used for soft switches, plush keypads, capacitive touch sensors
RM35.00