FREE SHIPPING to Peninsular Malaysia for orders over RM39.00
Dear valued customer. In line with the MCO 2.0 introduced by government, we will be disable self-collection service start from 21/1/2021 until further notice. But no worry, you still can place your order from our online store. All orders will be ship out via courier service. Stay home and Shop safely.
Sort by
Show result
  • Microcontroller: ATMEGA2560
  • 16U2 (USB to UART IC)
  • Operating Voltage: 5V
  • Digital I/O Pins: 54 (of which 15 provide PWM output)
  • Analog Input Pins: 16
  • Microcontroller: ATmega328P
  • 16U2 (USB to UART IC)
  • Support ISP download function
  • External power supply(Input): 7V to 12VDC
  • Output voltage: 3.3V and 5VDC
  • Microcontroller: ATmega328P
  • Digital I/O: 14
  • Analog I/O: 6
  • Support ISP download function
  • Operating Voltage: 3V3
  • Maximum Charge Current: 500mA
  • Digital I/O Pins: 4
  • Analog Input Pins: 1
  • DC Current PER I/O PIN: 12mA
  • Material: Acrylic
  • Color: Transparent
  • Compatible with NVIDIA Jetson Nano Development Board(A02 & B01)
  • Material: Acrylic
  • Color: Transparent
  • Included Acrylic Camera Bracket for Camera Module
  • Compatible with NVIDIA Jetson Nano Development Board (A02 & B01)
  • Measures 2.4" x 0.9" x 0.28" (61mm x 23mm x 7mm) without headers soldered in
  • Light as a (large?) feather - 8.2 grams
  • ATmega32u4 @ 8MHz with 3.3V logic/power
  • 3.3V regulator with 500mA peak current output
  • USB native support, comes with USB bootloader and serial port debugging
  • Measures 2.0" x 0.9" x 0.28" (51mm x 23mm x 8mm) without headers soldered in
  • Light as a (large?) feather - 5 grams
  • ATSAMD51 32-bit Cortex M4 core running at 120 MHz, 32-bit, 3.3V logic and power
  • Hardware DSP and floating point support
  • 512 KB flash, 192 KB RAM
  • All-in-one Bluetooth Low Energy board
  • 51mm x 22.9mm x 7.1mm
  • Weight: 5.2g
  • ATmega32u4 onboad chip in QFN package
  • 5V power and logic, 16MHz clock rate, 2KB RAM and 28K FLASH
  • USB bootloader with a nice LED indicator, AVR109 compatible (same as Flora, Feather 32u4, Leonardo, etc)
  • ATmega328 microcontroller with Optiboot (UNO) Bootloader
  • USB Programming and debugging via the well-supported genuine FTDI FT231X or the SiLabs CP2104
  • Input voltage (Vin): 6-16V 
  • ATmega328P onboard chip in QFN package running at 3.3V logic
  • 12MHz clock rate, 28K FLASH available
  • Also has headers for an FTDI port for reprogramming
  • Same size, form-factor, and pinout as classic Trinket
  • Updating ATtiny85 8-bit AVR for ATSAMD21E18 32-bit Cortex M0+
  • 256KB Flash - 32x as much as 8 KB on ATtiny85
  • 32 KB RAM - 64x as much as 512 bytes on ATtiny85
  • Need an external 16MHz crystal or resonator, a 5V supply, and a serial connection
  • Atmel’s ATMega328P 8-Bit Processor in 28 pin DIP package. 
  • It’s like the ATmega168, with double the flash space. 32K of program space. 23 I/O lines, 6 of which are channels for the 10-bit ADC.
  • Support for Arduino IDE 1.0+ (OSX/Win/Linux).
  • Power via USB or External Source - 5V or 7-35V (automatic selection).
  • On-board 500mA 5V Regulator.
  • Requires no special tools or programming
  • Powered by USB
  • Features 6x LEDs that produce 6x modes to provide light
  • super easy connector system for creating lamps on any sheet material
  • USB client for power and communications
  • Ethernet and HDMI interface
  • 512MB DDR3 RAM
  • 4GB 8bit eMMC on board flash storage
  • Optional on board 20 pin CTI JTAG, serial header
  • On board Main power switch
  • On board Vin polarity protection
  • Vin is extended out breadboard
  • Don't have to solder or sew to make it work
  • Can power it from USB, a AAA battery pack, or with a Lipoly battery
  • Circuit Playground Express has built-in USB support
  • Input Voltage:5-12V
  • Operating Voltage: 5V
  • Clock Frequency: 16MHz
  • Max 150mA output
  • Over current protected
  • Hardware I2C / SPI capability for breakout & sensor interfacing.
  • Works with many basic Arduino libraries including RainbowBit library.
  • Comes with mounting holes.
  • Super small and Cute of course!
  • Small size with smart design, it is a perfect match for your micro:bit
  • Easily connected to micro:bit and lead out its power and IO ports with screws only
  • Lead out P0/P1/P2/3V/GND port on micro:bit board
  • Chip: ESP8266
  • Module: ESP-13 with metal shield
  • Compatible with Arduino UNO and Arduino Mega 2560
  • Dual-Ports DIP switch between for Arduino and ESP8266


  • Operating Voltage: 5.0V
  • Response Time: 4 seconds (Typ)
  • Analog Error (both ends): <± 20mV (Typ)
  • Interface Type: PH2.0-3P
  • No load Current: 75mA
  • Dimension: 42 * 32mm / 1.65 * 1.26 inch
  • MOSFET Model: CJQ4435
  • Dimension: 40 * 20 * 15 mm
  • Weight: G.W 11g
  • Microntroller: ATmega328P
  • Programming IDE: Arduino IDE
  • Voltage: 5V
  • Digital I/O Pins: 20
  • PWM: 6
  • Analog Input: 8(10-bit)
  • 500mA (maximum) 3.3V voltage regulator
  • 0-5V outputs with 3.3V compatible inputs
  • 14 Digital I/O Pins (6 PWM outputs)
  • 6 Analog Inputs
  • Digital output using LEDs & driving a small motor
  • Digital input using push button
  • Analog input with potentiometer
  • LDR for light detection and more
  • Microcontroller: ATMEGA2560
  • CH340 (USB to UART IC)
  • Operating Voltage: 5V
  • Input Voltage (recommended): 7-12V
  • Input Voltage (limits): 6-20V
  • Metal case for Jetson Nano Developer Kit
  • Easy access to the peripheral connectors
  • With camera holder, RESET and POWER buttons