CRAZY PICKS
FREE SHIPPING to Peninsular Malaysia for orders over RM39.00
We will be disable retail service during MCO. But no worry, you still can place order from our online store. All orders will be ship out via courier service. Stay home and Shop safely ♥
★ CRAZY PICKS
★ CRAZY PICKS
★ CRAZY PICKS

Guaranteed Below Market Price

more goodies at here

 

Sort by
Show result
  • Walk-In Price: RM104.00
  • Warranty: 12 Months (T&C Apply)
  • 1x Digital Sandbox Board
  • 1x Clear Acrylic Baseplate
  • 1x USB Mini-B Cable - 6ft
  • 1x Instruction Manual
  • 4x Phillips Machine Screw - 4-40, 3/8"
  • 4x Standoff - 4-40, 3/8"
RM99.00
RM250.00
  • Walk-In Price: RM32.90
  • Warranty: 12 Months (T&C Apply)
  • 8x8 dot matrix display assembled
  • Power supply: 5v 
  • Max current consumption: 300mA
  • LED color: RGB tri-color LEDs
  • Directly support Arduino
RM29.90
RM165.00
  • Walk-In Price: RM204
  • Warranty: 12 Months (T&C Apply)
  • 4WD Arduino mobile robot development platform
  • 4 high-quality micro-speed motor
  • Complete chassis with mounting hardware
  • With Instruction Manual for your assembly
RM199.00
RM245.00
  • Walk-In Price: RM70.00
  • Warranty: 12 Months (T&C Apply)
  • Bi-directional control for two brushed DC motor
  • Support motor voltage ranges: 6VDC - 24VDC.  
  • Every channel output built with LED indicator.
  • Current limiting: 30A.   
RM65.00
RM85.00
  • Walk-In Price: RM124
  • Warranty: 12 Months (T&C Apply)
  • Power supply 5V/50mA
  • Camera Shield + Camera Module + 3.2'' TFT LCD with touch screen
  • Universal camera control board for Arduino
  • Resolution support: 0.3MP~5MP
  • Able plug directly with Arduino UNO R3 / MEGA 2560 / DUE
RM119.00
RM239.00
  • Walk-In Price: RM32.9
  • Warranty: 12 Months (T&C Apply)
  • BT Version: Bluetooth Specification V4.0 & BLE
  • UART send and receive max bytes is 512
  • Other device to module in SPP mode: 90 Bytes per packet
  • Other device to module in BLE mode: 20 Bytes per packet
  • Two data transmission mode, balance mode and high speed mode
RM29.90
RM119.00
  • Walk-In Price: RM84.9
  • Warranty: 12 Months (T&C Apply)
  • Compatible with Raspberry Pi A+, B+, 2B, 3B and 3B+
  • 3D tracking
  • Gesture sensing up to 15cm
  • Touch and Tap sensing
RM79.90
RM169.00
  • Walk-In Price: RM339
  • Warranty: 12 Months (T&C Apply)
  • Spear Tip pH ProbeMeasuring Range: 0~10pHAccuracy: ± 0.1pHOperating Temperature: 5~60 ℃
  • Signal Transmitter BoardInput Power : + 5.00VOuput Signal: 0 ~ 4.0VAccuracy : < ±0.2pH (25 ℃)
RM329.00
RM450.00
  • Walk-In Price: RM64.90
  • Warranty: 12 Months (T&C Apply)
  • Length (with protective cover):17.7cm(6.97")
  • Diameter:2.74cm(1.08")
  • Wire Length:5m(196.85")
RM59.90
RM212.90
  • Walk-In Price: RM74.9
  • Warranty: 12 Months (T&C Apply)
  • Development board specially designed to do just that
  • Act as a USB host and supply charging current to your device
  • IOIO-OTG will assume device mode and present itself as a virtual serial port
  • Can be upgraded without needing a programmer using the IOIODude application
  • Fixed the problems that plagued the previous version making it a true vision of how the board is intended
RM69.90
RM165.00
  • Walk-In Price: RM53.9
  • Warranty: 12 Months (T&C Apply)
  • Encoder Specification
    • Working Voltage:3.3V or 5V
    • Working Current:<14mA @5V 
    • Pulse Output:48 per revolution
    • Compatibility:42mm x 19mm (1.65x0.75") wheel
  • Motor Specification
    • 13000 rpm @ No load
    • 50:1 Gear ratio
    • 260 rpm @ 6V
    • 40mA @ 6V
    • 360mA stall current @ 6V
    • 10 oz inches torque @ 6V
RM49.90
RM135.00
  • Walk-In Price: RM21.9
  • Warranty: 12 Months (T&C Apply)
  • Control Plug & Play Board with Display
  • Compatible with Raspberry Pi 2 Model B, Raspberry Pi Model B+/A+
  • SVHC: To Be Advised
RM19.90
RM110.00
  • Walk-In Price: RM2.50
  • Warranty: 12 Months (T&C Apply)
  • Power Supply Voltage: +3.5~+5.3V
  • Input Signal Voltage: -0.5~VDD+0.5V
RM2.00
RM3.00
  • Walk-In Price: RM10.90
  • Warranty: 1 Month (T&C Apply)
  • Use immersion gold production process
  • Hole spacing is the standard 2.54mm (100ml)
  • Compatible with DIP packaged IC
  • IO mouth with a terminal output
RM9.90
RM15.00
  • Walk-In Price: RM53.90
  • Warranty: 12 Months (T&C Apply)
  • 315MHz frequency
  • Used with the Raspberry Pi
  • No cables are required to switch lights, control blinds

 

RM49.90
RM239.00
  • Walk-In Price: RM110
  • Warranty: 12 Months (T&C Apply)
  • ESP8266-Based
  • On-Board Si7021 Temp/Humidity sensor
  • Solderless pin connectors - compatible with alligator clips
  • On-Board FTDI for re-programming
  • On-board WS2812 RGB LED
  • General purpose LED and button
  • ADC scaled to 0-3.3V
RM105.00
RM145.00
  • Walk-In Price: RM104
  • Warranty: 12 Months (T&C Apply)
  • Triple Axis Accelerometer Breakout
  • Hall Effect Sensor
  • Tilt Sensor
  • Piezo Element 
  • Insulated Reed Switch 
RM99.00
RM175.00
  • Walk-In Price: RM124
  • Warranty: 12 Months (T&C Apply)
  • On-Board GP3906-TLP GPS Module
  • 12mm Coin cell battery socket
  • µSD memory card socket
  • Standard Arduino sized shield
  • Prototyping area
  • UART switch controls serial communications
RM119.00
RM215.00
  • Walk-In Price: RM53.90
  • Warranty: 12 Months (T&C Apply)
  • 8 sensor eyes
  • Provide accurate line tracking
  • I2C interface
  • Adjust IR brightness on the fly with a knob
RM49.90
RM135.00
  • Walk-In Price: RM94
  • Warranty: 12 Months (T&C Apply)
  • The MicroView is the first chip-sized Arduino compatible module that lets you see what your Arduino is thinking using a built-in OLED display.
  • With the on-board 64x48 pixel OLED, you can use the MicroView to display sensor data, emails, pin status, and more.
  • It also fits nicely into a breadboard to make prototyping easy.
  • The MicroView also has a full-featured Arduino library to make programming the module easy.

 

RM89.00
RM205.00
  • Walk-In Price: RM43.00
  • Warranty: 12 Months (T&C Apply)
  • Input voltage: DC7-15V.
  • 1A (maximum) 5V voltage regulator.
  • 500mA (maximum) 3.3V voltage regulator.
  • 0-5V outputs with 3.3V compatible inputs.
  • 14 Digital I/O Pins (6 PWM outputs).
  • 6 Analog Inputs.
RM39.00
RM60.00
  • Walk-In Price: RM43.9
  • Warranty: 12 Months (T&C Apply)
  • ATmega328 microcontroller with Optiboot (UNO) Bootloader
  • USB Programming and debugging via the well-supported genuine FTDI FT231X
  • Input voltage: 7-9V (a 9VDC power supply is recommended)
RM39.90
RM105.00