CLEARANCE
FREE SHIPPING to Peninsular Malaysia for orders over RM39.00
All orders will be shipped out and temporary closed for Retail during FMCO (01/06-14/06)
CLEARANCE
CLEARANCE
Sort by
Show result
  • Walk-In Price: RM110
  • Warranty: 12 Months (T&C Apply)
  • Image Sensor: 5MP OV5647
  • Lens: Stock lens, FOV: 60°
  • Interface: CSI-2/MIPI
  • Camera width: 8.5mm, neck width 6mm, cable length 300mm
  • Need adapter to work with Pi Zero/W
RM105.00
RM115.00
  • Walk-In Price: RM140
  • Warranty: 12 Months (T&C Apply)
  • Wide power input range from 3 to 8 volts
  • Low noise LDO regulator
  • LED power indication
  • Integrate 10 dof sensors
  • Compact size design and easy-to-use
  • Compatible with Arduino controllers
RM135.00
RM165.00
  • Walk-In Price: RM70.00
  • Warranty: 12 Months (T&C Apply)
  • Bi-directional control for two brushed DC motor
  • Support motor voltage ranges: 6VDC - 24VDC.  
  • Every channel output built with LED indicator.
  • Current limiting: 30A.   
RM65.00
RM85.00
  • Walk-In Price: RM51.00
  • Warranty: 12 Months (T&C Apply)
  • Bi-directional control for 1 brushed DC motor
  • Support motor voltage ranges from 7V to 25V (Rev1.0), 7V to 30V (Rev2.0)
  • Max current: up to 10A continuous and 15A peak
  • 3.3V and 5V logic level input
  • Speed control PWM: up to 10KHz
RM47.00
RM52.00
  • Walk-In Price: RM49.00
  • Warranty: 12 Months (T&C Apply)
  • Dimensions : 40.8 × 20.1 × 38 mm
  • Weight : 56 g
  • Operating Speed : 0.18sec/60degree (4.8V) | 0.16sec/60degree (6V)
RM45.00
RM51.50
  • Walk-In Price: RM55.00
  • Warranty: 12 Months (T&C Apply)
  • Material:Aluminum-alloy
  • Inside Diameter:10mm
  • Outside Diameter:57mm
  • Bore Length:25mm
  • Net Weight:54g
RM50.00
RM70.00
  • Walk-In Price: RM60
  • Warranty: 12 Months (T&C Apply)
  • Rated voltage: 12VDC
  • No load current: < 350mA
  • No load speed: > 200 RPM
  • Rated load torque: 196mN.m (2kgf.cm)
  • Rated current: < 1.2A
  • Rated load speed: 175 RPM
RM52.00
RM55.00
  • Walk-In Price: RM240
  • Warranty: 12 Months (T&C Apply)
  • Voltage: 12VDC
  • Rated Torque: ~19.99 kg.cm (1.96 N.m) 
  • Rated Speed: 63 RPM
  • Rated Current: 5500mA 

 

RM235.00
RM249.50
  • Walk-In Price: RM105
  • Warranty: 12 Months (T&C Apply)
  • Powerful brushed DC motor with 131.25:1 metal gearbox intended 
  • Operation: 12V
  • 16 mm-long with 6 mm-diameter D-shaped output shaft
  • Available with an integrated encoder
RM100.00
RM115.00
  • Walk-In Price: RM56.8
  • Warranty: 12 Months (T&C Apply)
  • Control System: Digital Programmable
  • Direction: CW
  • Required Pulse: 500~2500us
  • Bearing Type: 2BB
  • Connector Wire Length: 30 cm
RM51.50
RM57.50
  • Walk-In Price: RM31
  • Warranty: 12 Months (T&C Apply)
  • 5V voltage regulator (1A max)
  • 20MHz oscillator
  • Reset button
RM28.00
RM35.00
  • Walk-In Price: RM39.10
  • Warranty: 1 Month (T&C Apply)
  • Material: Aluminium
  • Clamp Max open is 55mm
  • Clamp total length:108mm
  • Clamp total width: 98mm (Clamp close)
  • Working voltage: 4.8-6V (Clamp open)
RM35.00
RM36.90
  • Walk-In Price: RM43.60
  • Warranty: 1 Month (T&C Apply)
  • 0.1 inch (2.54mm) standard pitch pin header, easy for prototyping
  • Onboard 2.8V,1.8V LDO regulator, single 3.3V supply needed.
  • DigitalClarity CMOS imaging technology
  • Ultra low-power, low-cost, progressive scan
  • 2-megapixel resolution (1,600H x 1,200V)
  • 1/3.2-inch optical format
RM39.50
RM49.50
  • Walk-In Price: RM71.5
  • Warranty: 12 Months (T&C Apply)
  • 2.8" diagonal LCD TFT display datasheet
  • 240x320 resolution, 18-bit (262,000) color capable - our code uses only 16-bits since its faster. 
  • ILI9341 (datasheet) controller with built in video RAM buffer
  • 69mm x 50mm x 4mm / 2.7" x 2" x 0.2"
  • Weight: 24g​
RM66.50
RM95.00
  • Walk-In Price: RM53.9
  • Warranty: 12 Months (T&C Apply)
  • 2.8" portable USB touchscreen monitor for Raspberry Pi
  • Designed specifically for embedded designs with business card size
  • Display resolution: 320 x 240
  • Touch screen: Resistive single point
 

 

 

RM49.90
RM220.00
  • Walk-In Price: RM2.50
  • Warranty: 1 Month (T&C Apply)
  • Good choice for your projects
  • Use for indicator signal, accident signal, fault signal and others
  • Long life and low energy consumption​
RM2.00
RM2.50
  • Walk-In Price: RM79.50
  • Warranty: 1 Month (T&C Apply)
  • Dimensions 327mm x 327mm
  • Mounting hole diameter: 3.2mm
  • Laminate FR4 2.0+/-0.15mm
RM74.50
RM149.00
  • Walk-In Price: RM32.2
  • Warranty: 12 Months (T&C Apply)
  • Industrial grade PCB.
  • Every board is being tested before it is shipped out.
  • Compact platform and breadboard-friendly
  • Suitable for hobbyists and expert.
RM29.00
RM36.50
  • Walk-In Price: RM44.5
  • Warranty: 12 Months (T&C Apply)
  • Model No.: FT-MC-001
  • Scale: 1:10
  • Certification: CE, RoHS
  • Drive: 2WD
  • Work voltage: 4.5 ~ 6V
RM40.50
RM45.00
  • Walk-In Price: RM72.5
  • Warranty: 12 Months (T&C Apply)
  • Weight: 150g
  • Size(L*W*H): 170mm*100mm*60mm
  • Weight: 138g
RM67.50
RM75.00
  • Walk-In Price: RM43.50
  • Warranty: 12 Months (T&C Apply)
  • 2 way 7-12V motor drive 
  • Up to 1A current each way
  • PIN 4,5,6,7 are used to drive two DC motors
  • Support PWM speed control 
RM39.50
RM46.00
  • Walk-In Price: RM194
  • Warranty: 12 Months (T&C Apply)
  • Can be used in 4WD mobile robot platforms
  • Uses 4 high-performance & high-current driver chips (BTS7960)
  • Protective functions: Current short, over temperature and over voltage
  • Can control 2 motors with only 4 digital IO at the same time
  • Compatible with Arduino

 

RM189.00
RM210.00
  • Walk-In Price: RM85
  • Warranty: 12 Months (T&C Apply)
  • Uses a 128x64 liquid crystal display that support Chinese character, English characters and even graphics
  • Suitable for interactive work with Arduino
  • A backlit control, pallerlel or serial control, contrast adjust
  • Can be connect to our interface shield for arduino via IDC6 socket and Cable for Shiftout
  • Default in parallel mode 
RM80.00
RM95.00
  • Walk-In Price: RM31.00
  • Warranty: 12 Months (T&C Apply)
  • Module Interface: Arduino Compatible
  • Occupied Port: Digital Port 3,8,9,10,11
  • Operating Frequency: 315MHz
  • Operating Current: 10mA(Maximum)
RM28.00
RM31.50
  • Walk-In Price: RM32.50
  • Warranty: 1 Month (T&C Apply)
  • High quality aluminum heatsink/heat sink holder
  • For 12mm laser modules like 12mm red, green and IR laser modules
  • Help to cool the laser to prolong the working time of laser mdoules
RM29.50
RM34.90
  • Walk-In Price: RM60.2
  • Warranty: 12 Months (T&C Apply)
  • Help kids or novice electronic enthusiasts learn about things like soldering and simple knowledge of circuit
  • Designed with ambient light level
  • There is no programming involved
RM55.00
RM69.00
  • Walk-In Price: RM63.5
  • Warranty: 12 Months (T&C Apply)
  • Weight: 150g
  • Size(L*W*H): 170mm*100mm*60mm
  • Weight: 138g
RM58.50
RM65.00
  • Walk-In Price: RM81.5
  • Warranty: 12 Months (T&C Apply)
  • Weight: 150g
  • Size(L*W*H): 170mm*100mm*60mm
  • Weight: 138g
RM76.50
RM85.00
  • Walk-In Price: RM115
  • Warranty: 12 Months (T&C Apply)
  • Onboard LDO regulators for 2.8V and 1.8V
  • Single 3.3V power input
  • 2.54mm (0.1 inch) standard pin out
  • Open source project www.ArduCAM.com supported
RM110.00
RM139.00
  • Walk-In Price: RM46.50
  • Warranty: 12 Months (T&C Apply)
  • 3 μs output rise time in response to step input current
  • 40 mV/A output sensitivity
  • Output voltage proportional to AC or DC currents
  • Factory-trimmed for accuracy
RM42.50
RM50.00
  • Walk-In Price: RM44.00
  • Warranty: 12 Months (T&C Apply)
  • Working voltage: 3~5v
  • I2C Digital-output of 6 or 9-axis MotionFusion data in rotation matrix, quaternion, Euler Angle, or raw data format
  • Tri-Axis angular rate sensor (gyro) with a sensitivity up to 131 LSBs/dps and a full-scale range of ±250, ±500, ±1000, and ±2000dps
  • Tri-Axis accelerometer with a programmable full scale range of ±2g, ±4g, ±8g and ±16g
RM40.00
RM45.00
  • Walk-In Price: RM43.90
  • Warranty: 12 Months (T&C Apply)
  • Rated voltage: 6VDC
  • No load current: < 80mA
  • No load speed: 225 ± 23 RPM 
  • Rated load torque: 34mN.m (0.35kgf.cm)
  • Rated current: < 340mA
  • Rated load speed: 169 ± 17 RPM
RM39.90
RM45.00
  • Walk-In Price: RM57.5
  • Warranty: 12 Months (T&C Apply)
  • Output: DC 8.5V 1.5A
  • Interface: DC 2.1mm (Female/Male) (Arduino compatible)
  • Led Indicator: Red (charging), Green (charged), Green Flash (protection mode triggered)
  • Support Battery: 7.4V Lipo Battery (2-cell pack)
RM52.50
RM75.00
  • Walk-In Price: RM104
  • Warranty: 12 Months (T&C Apply)
  • Power supply: 5v 
  • Max current comsuption: 300mA
  • Communications interface: SPI(3 digital pins or hardware SPI interface)
  • LED color: RGB tri-color LEDs
  • 8x8 dot matrix display assembled
  • Useful both for industrial and commercial information displays as well as for hobbyist human–machine interfaces
  • Directly support Arduino
RM99.00
RM165.00
  • Walk-In Price: RM100
  • Warranty: 12 Months (T&C Apply)
  • 128x64 OLED Screen
  • Buzzer, RGB LED
  • DHT11 Temperature&Humidity Sensor
  • 1.5A Relay
  • Helical Potentiometer
  • Mini Joystick
RM95.00
RM115.00
  • Walk-In Price: RM8.20
  • Warranty: 1 Month (T&C Apply)
  • Simple & Elegant Stand designed for Raspberry Pi Official 7" Touch Screen Monitor
  • Made of Premium Acrylic Material
RM7.50
RM9.00
  • Walk-In Price: RM4
  • Warranty: 12 Months (T&C Apply)
  • For the Xboard Relay and Romeo - an Arduino Robot Control Board
  • Transparent acrylic panels looks crystal clear and clean
  • Two different choise for different hobbies
  • Basic version is a atable base
  • Special version is more eye-catching
RM3.50
RM5.00
  • Walk-In Price: RM53.00
  • Warranty: 12 Months (T&C Apply)
  • A fully tested and assembled LED backpack
  • Ultra-bright 4-digit 0.56" tall white seven-segment display
  • 4-pin header
RM49.00
RM59.00
  • Walk-In Price: RM53.00
  • Warranty: 12 Months (T&C Apply)
  • Driver chip that does all the heavy lifting for you
  • Built in clock so they multiplex the display
  • Use constant-current drivers for ultra-bright
  • Consistent color , 1/16 step display dimming, all via a simple I2C interface
  • Come with address-selection jumpers so you can connect up to four mini 8x8's or eight 7-segments

 

RM49.00
RM59.00
  • Walk-In Price: RM74.00
  • Warranty: 12 Months (T&C Apply)
  • 12 capacitive touch sensors
  • Detecting when a person (or animal) has touched one of the sensor electrodes
  • 12 'figure 8' holes
RM69.00
RM85.00
  • Walk-In Price: RM17.00
  • Warranty: 12 Months (T&C Apply)
  • Connect to those pesky 0.5mm pitch connectors
  • Designed this for use in house
  • Quickly connect to 50pin 0.5mm pitch flex cables
RM15.00
RM19.00
  • Walk-In Price: RM75
  • Warranty: 12 Months (T&C Apply)
  • SD card interface works with FAT16 or FAT32 formatted cards. 3.3v level shifter circuitry prevents damage to your SD card
  • Real time clock (RTC) keeps the time going even when the Arduino is unplugged. The battery backup lasts for years
  • Included libraries and example code for both SD and RTC mean you can get going quickly
  • Prototyping area for soldering connectors, circuitry or sensors.
RM70.00
RM85.00
  • Walk-In Price: RM25.4
  • Warranty: 12 Months (T&C Apply)
  • Can break out all those tasty power, GPIO, I2C and SPI pins from the 26 pin header
  • Make "cobbling together" prototypes with the Pi super easy
  • Designed for use with Raspberry Pi 1 Model B AND Model A, both revisions
RM22.50
RM32.00
  • Walk-In Price: RM80.00
  • Warranty: 12 Months (T&C Apply)
  • 1.2" Bi-color 8x8 LED Matrix
  • 24 pins
  • 33mm x 41mm x 4mm / 1.3" x 1.6" x 0.16"
RM75.00
RM89.00
  • Walk-In Price: RM80
  • Warranty: 12 Months (T&C Apply)
  • 12 capacitive touch sensors
  • Capacitive touch sensing works by detecting when a person (or animal) has touched one of the sensor electrodes
  • The HAT has 12 'figure 8' holes in it that can be gripped onto with alligator clip cables
RM75.00
RM95.00
  • Walk-In Price: RM134
  • Warranty: 12 Months (T&C Apply)
  • Measures 2.0" x 0.9" x 0.28" (51mm x 23mm x 8mm) without headers soldered in
  • Light as a (large?) feather - 5.7 grams
  • ATmega32u4 @ 8MHz with 3.3V logic/power
  • 3.3V regulator with 500mA peak current output
  • USB native support, comes with USB bootloader and serial port debugging
RM129.00
RM169.00
  • Walk-In Price: RM205
  • Warranty: 12 Months (T&C Apply)
  • Measures 2.4" x 0.9" x 0.28" (61mm x 23mm x 7mm) without headers soldered in
  • Light as a (large?) feather - 8.2 grams
  • ATmega32u4 @ 8MHz with 3.3V logic/power
  • 3.3V regulator with 500mA peak current output
  • USB native support, comes with USB bootloader and serial port debugging
RM200.00
RM250.00
  • Walk-In Price: RM115
  • Warranty: 12 Months (T&C Apply)
  • ATSAMD21G18 @ 48MHz with 3.3V logic/power
  • 3.3V regulator with 500mA peak current outpu0t
  • USB native support, comes with USB bootloader and serial port debugging
  • You also get tons of pins - 20 GPIO pins
  • Hardware Serial, hardware I2C, hardware SPI support
RM110.00
RM165.00
  • Walk-In Price: RM84.00
  • Warranty: 12 Months (T&C Apply)
  • HTU21D-F Temperature + Humidity Sensor
  • SHT15 Breakout It has a typical accuracy of ±2% with an operating range that's optimized from 5% to 95%
  • The temperature output has an accuracy of ±1°C from -30~90°C
RM79.00
RM95.00
  • Walk-In Price: RM75
  • Warranty: 12 Months (T&C Apply)
  • For use with 16x2 Character displays
  • Plug and play with any Arduino 'classic' - UNO, duemilanove, diecimilla, etc as well as Arduino Mega R3.
  • Uses only the I2C pins - Analog 4 & 5 on classic Arduinos, Digital 20 and 21 on Arduino Mega R3
  • This board/chip uses I2C 7-bit address 0x20
RM70.00
RM95.00
  • Walk-In Price: RM53.00
  • Warranty: 12 Months (T&C Apply)
  • ATmega32u4 onboad chip in QFN package
  • 5V power and logic, 16MHz clock rate, 2KB RAM and 28K FLASH
  • USB bootloader with a nice LED indicator, AVR109 compatible (same as Flora, Feather 32u4, Leonardo, etc)
RM49.00
RM65.00
  • Walk-In Price: RM32.00
  • Warranty: 12 Months (T&C Apply)
  • Comes assembled and tested
  • Uses the 5V input via Micro-B USB connector on the Pro Trinket or ItsyBitsy
  • For charging single Lithium Ion/Lithium Polymer 3.7/4.2v batteries (not for older 3.6/4.1v cells)
  • 100mA charge current, adjustable to 500mA by soldering a jumper closed
RM29.00
RM35.00
  • Walk-In Price: RM78.5
  • Warranty: 12 Months (T&C Apply)
  • ATmega328 microcontroller with Optiboot (UNO) Bootloader
  • USB Programming and debugging via the well-supported genuine FTDI FT231X
  • Input voltage: 7-9V (a 9VDC power supply is recommended)
RM73.50
RM105.00
  • Walk-In Price: RM43.90
  • Warranty: 12 Months (T&C Apply)
  • Comes assembled and tested with a free bonus JST cable!
  • 5V input via Mini-B USB connector
  • For charging single Lithium Ion/Lithium Polymer 3.7/4.2v batteries (not for older 3.6/4.1v cells)
  • 100mA charge current, adjustable to 500mA by soldering a jumper closed
RM39.90
RM49.00
  • Walk-In Price: RM100
  • Warranty: 12 Months (T&C Apply)
  • Can run off of any Lithium Ion or Lithium Polymer battery (3.7/4.2V kind)
  • Plug in the battery and recharge it via the microUSB jack
  • The onboard boost converter can provide at least 500mA current
  • The shield comes as a kit of parts, some light soldering is required to attach the stacking headers and switch
RM95.00
RM125.00
  • Walk-In Price: RM43.2
  • Warranty: 12 Months (T&C Apply)
  • ATmega328P onboard chip in QFN package running at 3.3V logic
  • 12MHz clock rate, 28K FLASH available
  • Also has headers for an FTDI port for reprogramming
RM39.00
RM56.00
  • Walk-In Price: RM134
  • Warranty: 12 Months (T&C Apply)
  • Comes with a 16x2 RGB POSITIVE LCD
  • Plug and play with any Raspberry Pi
  • Uses only the I2C (SDA/SCL) pins
RM129.00
RM165.00
  • Walk-In Price: RM104
  • Warranty: 12 Months (T&C Apply)
  • Based on the best-of-class Si4713
  • All-in-one stereo audio FM transmitter that can also transmit RDS/RBDS data
  • Wire up to your favorite microcontroller to the I2C data lines
RM99.00
RM125.00
  • Walk-In Price: RM204
  • Warranty: 12 Months (T&C Apply)
  • -165 dBm sensitivity, 10 Hz updates, 66 channels
  • Low power module - only 20mA current draw, half of most GPS's
  • Assembled & tested shield for Arduino Uno/Duemilanove/Diecimila/Leonardo (not for use with Mega/ADK/Due)
RM199.00
RM259.00
  • Walk-In Price: RM85
  • Warranty: 12 Months (T&C Apply)
  • Internal temperature reading
  • 3.3 to 5v power supply and logic level compliant!
  • SPI data requires any 4 digital I/O pins
RM80.00
RM105.00
  • Walk-In Price: RM99.50
  • Warranty: 12 Months (T&C Apply)
  • Can play any uncompressed 22KHz 16bit (on a 12bit DAC), mono Wave (.wav) files of any size.
  • While it isnt CD quality, it is certainly good enough to play music, have spoken word, or audio effects.
  • Output is mono, into L and R channels, standard 3.5mm headphone jack 
RM94.50
RM135.00
  • Walk-In Price: RM10.00
  • Warranty: 1 Month (T&C Apply)
  • Material: 2mm Hard aluminum
  • Surfacing: Sandblasting oxidation
  • Size: 123mm x 64mm
  • Weight: 34.5g
  • Color: Black sandblasting oxidation
RM9.00
RM10.50
  • Walk-In Price: RM10.00
  • Warranty: 1 Month (T&C Apply)
  • Material: 2mm Hard aluminum
  • Surfacing: Sandblasting oxidation
  • Size: 123mm x 64mm
  • Weight: 34.5g
  • Color: Silver sandblasting oxidation
RM9.00
RM10.50
  • Walk-In Price: RM10.9
  • Warranty: 12 Months (T&C Apply)
  • Material: 2mm Hard aluminum
  • Surfacing: Sandblasting oxidation
  • Size: 105mm x 60mm
  • Weight: 35g
  • Color: Silver sandblasting oxidation
RM9.90
RM11.00
  • Walk-In Price: RM28.00
  • Warranty: 12 Months (T&C Apply)
  • Supply Voltage: DC 3.3~5.5V
  • Operating Temperature: -40~85°C
  • Illumination Range: 1 – 1000 Lux
  • Output: analog voltage, 0 – 5V @VCC=5V
  • Module Size: 30 x 22mm (1.2x0.9 in)
RM25.00
RM32.00
  • Walk-In Price: RM5.30
  • Warranty: 1 Month (T&C Apply)
  • Servo rotation direction
  • Servo sensitivity of each cell of the test: 0.01ms
  • Operation: Auto / Manual 
  • LED digital display: Red 
RM5.00
RM12.00
  • Walk-In Price: RM240
  • Warranty: 12 Months (T&C Apply)
  • 1/2.3" optical format
  • RGB Bayer pattern
  • 14MP 4608 x 3288 MT9F001/002 sensor
  • 1.4 x 1.4 um Pixel size
  • 6.3fps at full resolution
RM235.00
RM295.00
  • Walk-In Price: RM67.1
  • Warranty: 12 Months (T&C Apply)
  • Reserved microphone and headphone jack for audio or GPIO signals 
  • Three additional solder pads are available (same signals as headphone jack) 
  • HDMI cables can be up to 10 meters
RM62.00
RM69.00
  • Walk-In Price: RM124
  • Warranty: 12 Months (T&C Apply)
  • Power supply 5V/50mA
  • Camera Shield + Camera Module + 3.2'' TFT LCD with touch screen
  • Universal camera control board for Arduino
  • Resolution support: 0.3MP~5MP
  • Able plug directly with Arduino UNO R3 / MEGA 2560 / DUE
RM119.00
RM239.00
  • Walk-In Price: RM72.5
  • Warranty: 12 Months (T&C Apply)
  • Support up to 4 ArduCAM mini SPI cameras
  • 4 cameras work simultaneously
  • Onboard SD/TF card storage
  • Additional power supply input
  • Well mate with Arduino
RM67.50
RM75.00
  • Walk-In Price: RM94.30
  • Warranty: 1 Month (T&C Apply)
  • Includes a selection of the most common and useful electronic components 
  • Starting the basics of electronics, to more complex projects, the kit will help you control the physical world with sensor and actuators
  • Start learning with Arduino, the largest open-source hardware platform in the world
RM89.00
RM105.00
  • Walk-In Price: RM100
  • Warranty: 12 Months (T&C Apply)
  • Measures 2.0" x 0.9" x 0.28" (51mm x 23mm x 8mm) without headers soldered in
  • Light as a (large?) feather - 9.7 grams
  • ESP8266 @ 80MHz with 3.3V logic/power
  • 4MB of FLASH (32 MBit)
  • Built in WiFi 802.11 b/g/n
  • 3.3V regulator with 500mA peak current output
RM95.00
RM115.00
  • Walk-In Price: RM135
  • Warranty: 12 Months (T&C Apply)
  • Requires no special tools or programming
  • Powered by USB
  • Features 6x LEDs that produce 6x modes to provide light
  • super easy connector system for creating lamps on any sheet material
RM130.00
RM145.00
  • Walk-In Price: RM204.50
  • Warranty: 12 Months (T&C Apply)
  • High-quality audio output
  • Extensive tutorials and easy startup experience
  • Powerful Python and C++ libraries so you can include sensors in your project
  • User-programmable RGB LED and multifunction button
  • Prototyping area with GPIO breakout to add additional sensors or buttons
RM199.50
RM285.00
  • Walk-In Price: RM49.4
  • Warranty: 12 Months (T&C Apply)
  • Ready-to-use touch and distance sensors
  • Printed with a unique pattern
  • Created intricate patterns
  • Perfect for testing your ideas quickly
  • Like other conductive paint tools and accessories
RM45.00
RM64.90
  • Walk-In Price: RM695
  • Warranty: 12 Months (T&C Apply)
  • Dries at room temperature in 10-15 minutes
  • Must be fully dry to work
  • Easily removable with soap and water
  • Touch and Distance Sensing
  • Works great with Electric Paint
  • Preprogrammed as an MP3 Player
RM675.00
RM795.00
  • Walk-In Price: RM360
  • Warranty: 12 Months (T&C Apply)
  • Arduino compatible (recognized as an Arduino Leonardo in IDE)
  • Atmel ATMega32U4 Microprocessor
  • Freescale MPR121 dedicated touch interface
  • VLSI VS1053B audio processor
  • Arduino Shield Compatible (check pins available)
RM350.00
RM499.00
  • Walk-In Price: RM81
  • Warranty: 12 Months (T&C Apply)
  • Stepper motor driver board for bi-polar stepper motors
  • Allegro A4988 stepper driver chip
  • Defaults to 16 step microstepping mode
  • On-board: 5V/3.3V regulation
RM76.00
RM95.00
  • Walk-In Price: RM11.00
  • Warranty: 1 Month (T&C Apply)
  • Material: 2mm Hard aluminum
  • Surfacing: Sandblasting oxidation
  • Size: 90mm x 29mm x 42mm
  • Weight: 48g
  • Color: Black
RM10.00
RM17.50
  • Walk-In Price: RM67.3
  • Warranty: 12 Months (T&C Apply)
  • Bluetooth chip:TI CC2540    
  • Frequency: 2.4GHz
  • Transfer rate:  ≤1Mbps
  • Modulation: GFSK, bluetooth low power, V4.0
  • Power consumption: working:10.6mA average ,ready mode:8.7mA 
  • Sensitivity: -93dB
RM62.00
RM89.00
  • Walk-In Price: RM90
  • Warranty: 12 Months (T&C Apply)
  • Establish an easy to use wireless link 
  • Works by simulating a UART device 
  • No big contracts to sign
  • No major hoops that you have to jump through
  • Great choice compared to classic Bluetooth
RM85.00
RM125.00
  • Walk-In Price: RM88.3
  • Warranty: 12 Months (T&C Apply)
  • BT Version: Bluetooth Specification V4.0 & BLE
  • UART send and receive max bytes is 512
  • Other device to module in SPP mode: 90 Bytes per packet
  • Other device to module in BLE mode: 20 Bytes per packet
  • Two data transmission mode, balance mode and high speed mode
RM82.00
RM119.00
  • Walk-In Price: RM115.00
  • Warranty: 12 Months (T&C Apply)
  • On-board BLE chip: TI CC2540
  • Wireless Programming via BLE
  • Support Bluetooth HID
  • Support AT command to config the BLE 
  • Transparent communication through Serial
RM110.00
RM135.00
  • Walk-In Price: RM53.00
  • Warranty: 12 Months (T&C Apply)
  • AT command to debug the BLE
  • support the master-salve machine switch
  • Transparent transmission
  • Wireless programming for Arduino processor (Compatible with Arduino UNO,Fio and Mega)
  • support usb update BLE chip program
  • support bluetooth HID
RM49.00
RM54.50
  • Walk-In Price: RM18.00
  • Warranty: 12 Months (T&C Apply)
  • On board Main power switch
  • On board Vin polarity protection
  • Vin is extended out breadboard
RM16.00
RM18.00
  • Walk-In Price: RM4.5
  • Warranty: 12 Months (T&C Apply)
  • For 2020 PCB Connector 8 ways
  • Pre-soldered with the male connector
  • It converts the signal pins to standard of 0.1"
RM4.00
RM5.00
  • Walk-In Price: RM6.4
  • Warranty: 12 Months (T&C Apply)
  • Designed to fit SPG10 DC brushed motor
  • Tiny, compact and useful
  • Require two points soldering
RM5.50
RM6.00
  • Walk-In Price: RM3.50
  • Warranty: 12 Months (T&C Apply)
  • Material: Brass and nylon
  • Size: Refer drawing in description
  • Weight: 3g
RM3.00
RM4.50
  • Walk-In Price: RM6.20
  • Warranty: 1 Month (T&C Apply)
  • 800% higher heat radiation efficiency than Copper/Aluminum heat sink
  • Ultra slim, ultra light & Simple installation
  • Perfectly matched to Raspberry PI 3 and PI 2 board
  • There is Adhesive on the back
  • Keep your Pi cool while working
RM5.00
RM6.50
  • Walk-In Price: RM4.00
  • Warranty: 1 Month (T&C Apply)
  • Collision switch
  • Operating voltage: 3.3V-5V
  • When touch, output low level ; when release, maintain a high level
  • Working temperature: -10°C ~ 50°C
  • Pitch of hole: 15mm
RM3.50
RM3.90
  • Walk-In Price: RM4
  • Warranty: 1 Month (T&C Apply)
  • Length: 35mm
  • Width: 16mm
  • Height: 7mm
  • Weight: 1.65g
RM3.50
RM5.00
  • Walk-In Price: RM30.00
  • Warranty: 1 Month (T&C Apply)
  • High-Resolution Conversion of Light Intensity to Frequency
  • Programmable Color and Full-Scale Output Frequency
  • Single-Supply Operation (2.7 V to 5.5 V)
  • Power Down Feature
  • Nonlinearity Error Typically 0.2% at 50 kHz
  • Stable 200 ppm/°C Temperature Coefficient
RM27.00
RM30.00
  • Walk-In Price: RM39.00
  • Warranty: 12 Months (T&C Apply)
  • Coated with silver to make it fully conductive
  • Each order ships with three inches of BOTH halves
  • Its easily sewn or cut
RM35.00
RM45.00
  • Walk-In Price: RM25.50
  • Warranty: 12 Months (T&C Apply)
  • Shaft size: 6mm
  • Outer diameter: 0.5"
  • Material: aluminum
RM22.50
RM25.00
  • Walk-In Price: RM43.90
  • Warranty: 12 Months (T&C Apply)
  • Shaft size: 10mm (fit perfectly with IG45/ 40W DC Geared Motor)
  • Outer diameter: 1" (fit perfectly with 4" transwheel)
  • Material: aluminum
RM39.90
RM45.00
  • Walk-In Price: RM8.20
  • Warranty: 1 Month (T&C Apply)
  • JTAG is available in the uSD connector
  • Access via breakout board, but this requires breakout board
  • Hold the CPU immediately
  • Export JTAG / UART from SD card pins on Allwinner chip
  • Used with cubieboard to export JTAG
RM7.50
RM12.00
  • Walk-In Price: RM24.6
  • Warranty: 12 Months (T&C Apply)
  • Hardware I2C / SPI capability for breakout & sensor interfacing.
  • Works with many basic Arduino libraries including RainbowBit library.
  • Comes with mounting holes.
  • Super small and Cute of course!
RM21.50
RM27.00
  • Walk-In Price: RM21.00
  • Warranty: 12 Months (T&C Apply)
  • Working Voltage:3~6V
  • Working Temperature:-20~85℃
  • Speed (no load):15000 rpm
  • Speed (6V):8000 rpm
  • Current (6V):40mA
RM19.00
RM24.90
  • Walk-In Price: RM18.70
  • Warranty: 1 Month (T&C Apply)
  • Model: GA12-N20
  • Rated Voltage: DC12V
  • Speed:  500RPM
  • Stall Torque: >0.26 kg.cm
  • Stall Current: <0.19
RM16.50
RM18.50
  • Walk-In Price: RM18.00
  • Warranty: 12 Months (T&C Apply)
  • Input Voltage: 0.9 V - 5 V
  • Output Voltage: 5 V
  • Duty ratio coefficient: 66% - 78%
  • Input interface: PH2.0; KF235-3.81-2P
  • Output interface: USB
RM16.00
RM19.00
  • Walk-In Price: RM44
  • Warranty: 12 Months (T&C Apply)
  • A small size 5A 350KHz 25V Buck DC to DC Converter
  • Can convert any DC voltage between 3.6V-25V to a selectable voltage from 3.3V to 25V
  • Can choose 5V direct output voltage with the convenient on-board switch
  • Or adjust the output voltage by the blue & white resistor
RM40.00
RM45.00
  • Walk-In Price: RM21.50
  • Warranty: 1 Month (T&C Apply)
  • Measuring Range: DC7.5 - 30V
  • Power Consumption: < 0.2VA
  • Accuracy: 0.5% ± 2 words 
  • LCD Display: 19mm
  • Backlight: Blue 
  • Size: Width 70 x Length 40 x Height 31mm
RM19.50
RM22.50
  • Walk-In Price: RM75
  • Warranty: 12 Months (T&C Apply)
  • Suitable for use with Raspberry Pi 2 Model B, Raspberry Pi 3 Model B, Raspberry Pi Model B+
  • Enables LCD touch screen and board to be portable
  • Provides protection to Raspberry Pi development board and LCD touch screen display
  • Snap together back cover for easy access to GPIO pins and internal components
  • RPi Camera board connection slot
RM72.00
RM90.00
  • Walk-In Price: RM104
  • Warranty: 12 Months (T&C Apply)
  • Rotation angle range: 170°
  • Stall torque:19.3kg.cm(7.4v)
  • Dynamic torque:15.1kg.cm(7.4v)
  • Teeth: 25
  • Working Voltage: 5-7.4v
  • Stall current:3A(@8.5V - Limit test)
  • PPM Voltage:3V-5V
  • PPM Resolution:2us

 

RM99.00
RM135.00
  • Walk-In Price: RM65
  • Warranty: 12 Months (T&C Apply)
  • Fully compatible with Ardunio Ethernet Shield
  • Arduino controller board with internet access
  • Connect Ethernet Shield to an Arduino board
RM60.00
RM75.00
  • Walk-In Price: RM75.00
  • Warranty: 12 Months (T&C Apply)
  • Microcontroller: Atmel Atmega328-20AU
  • Operating Voltage (logic level): 5V
  • Input Voltage (recommended): 7-12V
  • Input Voltage (limits): 6-20V
  • Digital I/O Pins: 14 (of which 6 provide PWM output)
  • Analog Input Pins: 8
  • DC Current per I/O Pin: 40 mA
RM70.00
RM95.00
  • Walk-In Price: RM44.00
  • Warranty: 12 Months (T&C Apply)
  • DC input 3.3V up to 8V(power supply from RAW pin)
  • DC input 3.3v(from VCC pin)
  • Bootloader: Arduino Pro/Pro Mini (3.3V, 8Mhz) w/ Atmega328
  • 3.3V regulator
  • Max 150mA output
RM40.00
RM55.00
  • Walk-In Price: RM204
  • Warranty: 12 Months (T&C Apply)
  • 4WD Arduino mobile robot development platform
  • 4 high-quality micro-speed motor
  • Complete chassis with mounting hardware
  • With Instruction Manual for your assembly
RM199.00
RM245.00
  • Walk-In Price: RM29.60
  • Warranty: 1 Month (T&C Apply)
  • DIP-18 Integrated Circuit IC
  • PIC16LF84-04/P
  • 8 Bit Microcontroller, PIC16LF8x, 4 MHz, 1.75 KB, 68 Byte
RM26.50
RM29.50
  • Walk-In Price: RM12.50
  • Warranty: 1 Month (T&C Apply)
  • Safe, Humane, Effective

  • Keep unfriendly Dogs away

  • Protect yourself from dangerous dogs while walking, jogging, or bicycling

  • Emits piercing ultrasonic tone that dogs hate / inaudible to humans

RM10.50
RM15.00
  • Walk-In Price: RM5.00
  • Warranty: 1 Month (T&C Apply)
  • Model: 2058AS
  • Polarity:Common Cathode
  • Color: Red
RM4.50
RM5.00
  • Walk-In Price: RM20.00
  • Warranty: 12 Months (T&C Apply)
  • Volatge:  5V
  • Size:  27x27mm(1.064*1.064")
  • Integrated LED for power indicator.
RM18.00
RM19.00
  • Walk-In Price: RM17.6
  • Warranty: 12 Months (T&C Apply)
  • Easy to recognize
  • Easy to learn
  • Easy to use
  • Easy to Plug/unplug
  • High-reliability
  • Environmentally-friendly
RM15.50
RM19.50
  • Walk-In Price: RM22
  • Warranty: 12 Months (T&C Apply)
  • Easy to recognize
  • Easy to learn
  • Easy to use
  • Easy to Plug/unplug
  • High-reliability
  • Environmentally-friendly
RM20.00
RM25.00
  • Walk-In Price: RM25
  • Warranty: 12 Months (T&C Apply)
  • Easy to recognize
  • Easy to learn
  • Easy to use
  • Easy to Plug/unplug
  • High-reliability
  • Environmentally-friendly
RM22.00
RM27.50
  • Walk-In Price: RM26.2
  • Warranty: 12 Months (T&C Apply)
  • Easy to recognize
  • Easy to learn
  • Easy to use
  • Easy to Plug/unplug
  • High-reliability
  • Environmentally-friendly
RM23.00
RM29.00
  • Walk-In Price: RM39.00
  • Warranty: 12 Months (T&C Apply)
  • An innovative programming/testing tool
  • Solves the problem of prototyping wearable projects with ICSP and FTDI interfaces in limited spaces
  • Provides 2x4 pogo-pins function-board
RM42.00
  • Walk-In Price: RM105
  • Warranty: 12 Months (T&C Apply)
  • Omni direection
  • Lego compatible
  • Adaptable for TT motors and 9g servos
  • Comes with 4 sets of adapter for TT motor and 9g Servo motor
RM100.00
RM169.00
  • Walk-In Price: RM205
  • Warranty: 12 Months (T&C Apply)
  • Available for use when being plugged
  • Rich tutorial cases
  • Connect limitless creativity with different sensors
  • With Microsoft MakeCode officially certified packages
RM200.00
  • Walk-In Price: RM11.00
  • Warranty: 12 Months (T&C Apply)
  • SD or MMC card breakout
  • Work with 5V power supply
  • Support direct use on Freaduino Sensor Shield
  • Comes with socket for both SD and microSD
RM10.00
RM15.00
  • Walk-In Price: RM28.00
  • Warranty: 1 Month (T&C Apply)
  • Voltage: 24 VDC 
  • Working Pressure: 0.02 - 0.8 Mpa 
  • Temperature Fluid Maximum: 100 ° C 
  • Mode of Work: Normally closed (NC) 
RM27.50
  • Walk-In Price: RM10.60
  • Warranty: 1 Month (T&C Apply)
  • Model: LS-P20/15
  • Voltage: DC 24V
  • Diameter: 20mm 
  • Power: 2W
  • Magnet Force: 2.5kg
RM9.50
RM12.00
  • Walk-In Price: RM70.00
  • Warranty: 12 Months (T&C Apply)
  • Glow Size: 10 cm x 10 cm (3.95" x 3.95")
  • Plastic Size: 10.4 cm x 10.4 cm (4.1" x 4.1"), about 0.5mm thick
  • Panel lifetime: >25000 hours
  • Operating voltage: 60-250VAC
RM65.00
RM85.00
  • Walk-In Price: RM70.00
  • Warranty: 12 Months (T&C Apply)
  • Panel lifetime: >25000 hours
  • Operating voltage: 60-250VAC
  • Operating Frequency: 50-5000HZ
  • Current Draw: 0.14mA/cm2 (max) @ 110V / 400Hz
RM65.00
RM85.00
  • Walk-In Price: RM7.00
  • Warranty: 1 Month (T&C Apply)
  • Brick interface: 3 pin
  • Working voltage: 3.3or5VDC
  • Compatible with the mainstream 2.54 interfaces and 4-Pin Grove interfaces
  • Plug and play, easy to use
RM6.00
RM12.00
  • Walk-In Price: RM4.60
  • Warranty: 1 Month (T&C Apply)
  • Three primary colors (red, green and blue) full color LED
  • 5050 were positive light tube, public termination +5 V, active low control terminal
  • Using PWM process can produce different color change effect
RM4.00
RM4.50
  • Walk-In Price: RM10.10
  • Warranty: 1 Month (T&C Apply)
  • Type: Sensor Brick 
  • Port: 3PIN 
  • Power Supply: 5V 
  • Board Size: approx. 30 X 24 X 1.6 mm
  • Weight: approx. 25 g 
RM9.00
RM13.00
  • Walk-In Price: RM12.5
  • Warranty: 12 Months (T&C Apply)
  • Compatible with open collector output encoder 
  • Size:31x24mm(1.22x0.94")
  • Designed for DFRobot 12V DC Motors.
  • Two built-in pull-up resistors
RM10.50
RM15.00
  • Walk-In Price: RM21.9
  • Warranty: 12 Months (T&C Apply)
  • IR sensor (38KHz)
  • SPDIF output
  • USB Storage: Self-powered USB hub with 3 ports
  • DIP switch to remove connection from RPi’s pin header 
RM19.90
RM180.00
  • Walk-In Price: RM8
  • Warranty: 12 Months (T&C Apply)
  • Dimension: 32 × 8.2 × 8.3 mm
  • Weight: 2 g
  • No. of Teeth: 25T
  • Colour: Silver anodised
RM7.00
RM10.00
  • Walk-In Price: RM32.00
  • Warranty: 12 Months (T&C Apply)
  • Miniature-sized servo from FEETECH with the same output spline as standard servos
  • Making it compatible with standard-size servo horns
  • Pinion gear is plastic, but the rest of the gear train consists of all metal gears
RM29.00
RM34.90
  • Walk-In Price: RM36.00
  • Warranty: 1 Month (T&C Apply)
  • Input voltage:3.7V~5.5V (VCC)
  • Output voltage:3.3V
  • Supports low-power consumption Mode: POWER_EN = LOW
RM32.00
RM38.50
  • Walk-In Price: RM53.00
  • Warranty: 12 Months (T&C Apply)
  • A sheet of flex PCB material
  • Used to make flexible circuits
  • Raw and unetched
  • Pyralux is the brand name of Dupont's flex PCB material
  • Used in cell phones and other small circuits
RM49.00
RM59.00
  • Walk-In Price: RM53.00
  • Warranty: 12 Months (T&C Apply)
  • Compatible with Raspberry Pi A+, B+, 2B, 3B and 3B+
  • Also works with Raspberry Pi Zero, Zero Wireless and all other Raspberry Pis with 40 GPIO pins (or compatible boards).
  • 3D tracking
  • Gesture sensing up to 15cm
  • Touch and Tap sensing
RM49.00
RM100.00
  • Walk-In Price: RM123.3
  • Warranty: 12 Months (T&C Apply)
  • Compatible with Raspberry Pi A+, B+, 2B, 3B and 3B+
  • Also works with Raspberry Pi Zero, Zero Wireless and all other Raspberry Pis with 40 GPIO pins (or compatible boards).
  • 3D tracking
  • Gesture sensing up to 15cm
  • Touch and Tap sensing
RM118.00
RM169.00
  • Walk-In Price: RM9.50
  • Warranty: 12 Months (T&C Apply)
  • Material: 5051 aluminum alloy
  • Colour: Red anodised
  • Size: 80mm x 70mm
RM8.50
RM9.50
  • Walk-In Price: RM10
  • Warranty: 12 Months (T&C Apply)
  • Model No.: FT-DC-M001
  • Material: 5051 aluminum alloy
  • Colour: Red anodized
  • Size: 100mm x 85mm
RM9.00
RM10.00
  • Walk-In Price: RM33
  • Warranty: 12 Months (T&C Apply)
  • Consumer Electronics

  • Imaging, Video & Vision

  • Medical

  • RF Communications

  • Wireless

RM30.00
RM60.00
  • Walk-In Price: RM10.60
  • Warranty: 1 Month (T&C Apply)
  • Adopts FTDI corporation FT232RL chips
  • All lead to FT232RL chip all signal port, TTL/CMOS level
  • RXD/TXD transceiver communication indicator light
RM9.50
RM12.00
  • Walk-In Price: RM75
  • Warranty: 12 Months (T&C Apply)
  • 6th pin is RTS (as of Arduino IDE v18 this will work perfectly for uploading to 'inos)
  • Power wire is +5V
  • Signal levels are 3.3V (they are 5V compliant, and should work in the vast majority of 3.3V and 5V signal systems).
RM70.00
RM85.00
  • Walk-In Price: RM27
  • Warranty: 12 Months (T&C Apply)
  • Arduino reset button
  • 4 x G15 Cube Servo ports.
  • (Rev2.0 does not come with Dynamixel port).
  • External power port for servo with polarity protection
  • Stackable I/O header pin
RM24.00
RM30.00
  • Walk-In Price: RM22.00
  • Warranty: 12 Months (T&C Apply)
  • Power with 2.3-6V
  • Onboard 68K load resistor for max 3V analog output
  • 0.2 grams
  • 0.4" x 0.5" x 0.06" (10mm x 13mm x 1.5mm)
  • 0.1" (2.5mm) mounting hole
RM20.00
RM24.00
  • Walk-In Price: RM28.00
  • Warranty: 1 Month (T&C Apply)
  • Working voltage: 3.3V-6V
  • Rated voltage: 4.8V
  • Rated current: 200ma
  • Stall current: 700ma
  • Sliding current: 450ma
RM25.00
RM32.50
  • Walk-In Price: RM277
  • Warranty: 12 Months (T&C Apply)
  • Great for experimenting and learning
  • Useful for most projects
  • Bundle of the most popular sensors from DFRobot
RM272.00
RM340.00
  • Walk-In Price: RM28.00
  • Warranty: 12 Months (T&C Apply)
  • Power Supply: 3.3/5v (MAX5.5V)
  • Module Interface: PH2.0-3pin
  • Operating Frequency: 315MHz
RM25.00
RM29.50
  • Walk-In Price: RM100
  • Warranty: 12 Months (T&C Apply)
  • Light sensor
  • Touch sensor
  • Temperature sensor
  • Magnetic sensor
  • Vibration sensor
  • Tilt sensor
  • Big button
  • LED lighting module
  • Grayscale sensor
RM95.00
RM115.00
  • Walk-In Price: RM53.00
  • Warranty: 12 Months (T&C Apply)
  • Interface type: Analog
  • Sensor Type: Semiconductor
  • Power supply needs: 5V
  • Able to adjusted by the potentiometer
RM49.00
RM59.00
  • Walk-In Price: RM15.7
  • Warranty: 12 Months (T&C Apply)
  • Supply Voltage: 3.3V to 5V
  • Detection range: 20cm (4.8V) ~ 100cm (1V)
  • Rang of Spectral Bandwidth : 760nm to 1100nm
  • Responsive time : 15us
  • Interface: Analog
  • Size:22x30mm (0.87x1.18in)
RM13.90
RM19.50
  • Walk-In Price: RM42.4
  • Warranty: 12 Months (T&C Apply)
  • Power supply: 5V
  • Interface type: Analog
  • Pin Definition:  1-Output  2-GND  3-VCC
  • High sensitivity to Hydrogen (H2)
RM38.00
RM48.00
  • Walk-In Price: RM339
  • Warranty: 12 Months (T&C Apply)
  • Spear Tip pH ProbeMeasuring Range: 0~10pHAccuracy: ± 0.1pHOperating Temperature: 5~60 ℃
  • Signal Transmitter BoardInput Power : + 5.00VOuput Signal: 0 ~ 4.0VAccuracy : < ±0.2pH (25 ℃)
RM329.00
RM450.00
  • Walk-In Price: RM104.8
  • Warranty: 12 Months (T&C Apply)
  • Onboard Microcontroller: ATmega32u4
  • Arduino Leonardo Chip
  • Arduino Compatible pin mapping
  • Compatible with All arduino standard shield and sensors
  • System Voltage: 5v
RM99.00
RM105.00
  • Walk-In Price: RM11.00
  • Warranty: 12 Months (T&C Apply)
  • Designed to attach a Beetle
  • For easy connecting servos and sensors
  • Directly stack the Beetle onto the Beetle Shield
  • Some soldering will be needed for reinforcement
RM10.00
RM14.50
  • Walk-In Price: RM35.5
  • Warranty: 12 Months (T&C Apply)
  • Operating voltage: 3.5V - 8V
  • Reduction ratio: 30:1
  • No load current: 40mA@6V (approx)
  • Static current: < 1mA (no PWM control signal input)
  • Interface: Gravity 3-Pin
RM31.50
RM45.00
  • Walk-In Price: RM25.50
  • Warranty: 12 Months (T&C Apply)
  • Operating Voltage: 2.8V ~ 5.5V
  • Input Signal: High Level (≥2.8V); Low Level (≤0.5V)
  • Max Switching Current: 10A
  • Max Switching Voltage: 35VAC; 30VDC
  • Rating Load: 10A@35VAC; 10A@28VDC
RM22.50
RM25.00
  • Walk-In Price: RM22.00
  • Warranty: 12 Months (T&C Apply)
  • Supply Voltage: 3.3V to 5V
  • Interface: Digital
  • Wide voltage range from 3.3V to 5V
  • Standard assembling structure (two 3mm holes with multiple of 5cm as interval)
  • Easily recognitive interfaces of sensors ("A" for analog and "D" for digital)
  • Icons to simplely illustrate sensor function 
  • High quality connector
  • Immersion gold surface
RM20.00
RM26.50
  • Walk-In Price: RM11.00
  • Warranty: 12 Months (T&C Apply)
  • Working Voltage: 5V
  • Onboard status indicator LED
  • Directly connected to the IO Expansion shield For Arduino
  • M3 mounting hole
RM10.00
RM12.00
  • Walk-In Price: RM11.00
  • Warranty: 12 Months (T&C Apply)
  • Working Voltage: 5v
  • Onboard status indicator LED
  • Directly connected to the IO Expansion Shield For Arduino
  • M3 mounting hole
RM10.00
RM12.00
  • Walk-In Price: RM28.00
  • Warranty: 12 Months (T&C Apply)
  • Supply Voltage: 3.3V to 5V
  • Indicator LED on board
  • Interface: Digital
  • Size:22x30mm (0.87x1.18")
RM25.00
RM27.00
  • Walk-In Price: RM12.5
  • Warranty: 12 Months (T&C Apply)
  • Power Supply:5V
  • Interface:Digital
  • Modulate Frequency:38Khz
RM10.50
RM15.00
  • Walk-In Price: RM14.00
  • Warranty: 12 Months (T&C Apply)
  • IO Type: Digital
  • Switch life: up to 10 million seconds
  • Open circuit resistance: 10Mohm
  • Supply Voltage: 3.3V to 5V
  • Interface: Digital
  • Size:22x30mm (0.87 x 1.18 in)
RM12.00
RM14.90
  • Walk-In Price: RM62.00
  • Warranty: 12 Months (T&C Apply)
  • Power supply: +5V
  • Working current: 25μA
  • Working temperature: -25~125℃
  • Detectable wall thickness: 1~13mm(0.40"x5.12")
RM57.00
RM69.50
  • Walk-In Price: RM11.00
  • Warranty: 12 Months (T&C Apply)
  • Power supply: 3.3v or 5v
  • Output voltage signal: 0~4.5v(@5v) or 0~3.0v(@3.3v)
  • Pin definition:
  • Analog output(Blue wire)
  • GND(Black wire)
  • Power(Red wire)
RM10.00
RM12.50
  • Walk-In Price: RM39.00
  • Warranty: 12 Months (T&C Apply)
  • Operating Voltage: 3.3-5V
  • Operating Current: 65 uA
  • Detection Range: 3 - 10 mm
  • The Clock Frequency: 0 - 400 KHZ
  • Interface: I2C
  • Temperature Range: -30℃ - + 70 ℃
  • Dimensions: 18.5 x 23 mm/ 0.73 x 0.9”
RM35.00
RM45.00
  • Walk-In Price: RM14.6
  • Warranty: 12 Months (T&C Apply)
  • Supply Voltage: 3.3V to 5V
  • Interface type: Analog  
  • 300 degree rotation sensor
  • Size:22x31mm (0.87x 1.2 in)
RM12.50
RM18.00
  • Walk-In Price: RM16.8
  • Warranty: 12 Months (T&C Apply)
  • Supply Voltage: 3.3V to 5V
  • Detecting Range: 
  • Interface:Digital
  • Operating current: 20mA @ 5V
RM14.50
RM18.50
  • Walk-In Price: RM25.50
  • Warranty: 12 Months (T&C Apply)
  • Design a clock, timer or counter 
  • These bright crisp displays are good for adding numeric output
  • Decimal points on each digit 
  • An extra wire for colon-dots in the center 
  • Can drive these with less current to get the same brightness to save power
RM22.50
RM29.00
  • Walk-In Price: RM26.00
  • Warranty: 12 Months (T&C Apply)
  • Display construction: 16 Characters * 2 Lines
  • Display mode: STN
  • On board MCU
  • I2C-bus interface
  • Support English and Japanese fonts
RM23.00
RM25.00
  • Walk-In Price: RM28.00
  • Warranty: 12 Months (T&C Apply)
  • Grove compatible interface
  • 3 axis motion/orientation sensing
  • Digital Output (I2C)
  • 10,000 g shock survival
  • RoHS/WEEE lead-free compliant
  • 5VDC input
RM25.00
RM42.00
  • Walk-In Price: RM94
  • Warranty: 12 Months (T&C Apply)
  • Digital two wire (I2C) interface 
  • Command-based Reading, Compensated (Optional) 
  • Ultra-low power consumption 
  • Altitude Resolution down to 0.01 meter 
  • Temperature measurement included
RM89.00
RM98.50
  • Walk-In Price: RM10.90
  • Warranty: 12 Months (T&C Apply)
  • Long operating life
  • Easy to use
  • Grove Digital interface
RM9.90
RM11.00
  • Walk-In Price: RM10.5
  • Warranty: 12 Months (T&C Apply)
  •  “P” is for “panel mount”
  •  They are identical except the Grove connecter is moved to the back 
  •  can easily use it as a neat and wire-free human interface device

 

RM9.50
RM13.50
  • Walk-In Price: RM25.50
  • Warranty: 12 Months (T&C Apply)
  • Grove compatible interface
  • Maximum 5A input
  • High accuracy
  • Small size
RM22.50
RM25.00
  • Walk-In Price: RM9.1
  • Warranty: 12 Months (T&C Apply)
  • Enables you to bend the LED to any position you want
  • Grove interface compatible
  • Plug and play
RM8.00
RM11.50
  • Walk-In Price: RM70
  • Warranty: 12 Months (T&C Apply)
  • Operating voltage: 3.3~5.0 V
  • Ripples (at maximum power): 50~100 mV
  • Max power: 750 mW
  • I2C speed: 100 kHz
  • Vibration effects: 123 types
  • Driver: DRV2605L
  • Port: I2C
  • Default I2C Address: 0x5A
RM65.00
RM79.50
  • Walk-In Price: RM16.50
  • Warranty: 12 Months (T&C Apply)
  • Transmit infrared signals through an infrared LED
  • Color centered around 940nm
  • Not only to transmit data but also to emulate remotes to control your home appliance using an Arduino
RM14.50
RM16.50
  • Walk-In Price: RM16.50
  • Warranty: 12 Months (T&C Apply)
  • Receive infrared signals and also used for remote control detection
  • Weight: G.W 6g
  • Battery: Exclude
RM14.50
RM16.50
  • Walk-In Price: RM14.6
  • Warranty: 12 Months (T&C Apply)
  • Power supply: 5V DC
  • Digital output mode: TTL
  • Connector: 4 pin Buckled Grove interface
  • Comparator: LMV358
  • Photo reflective diode: RS-06WD
RM12.50
RM18.00
  • Walk-In Price: RM25.50
  • Warranty: 12 Months (T&C Apply)
  • Detect the loudness of environmental sound
  • Screw potentiometer that enables manual adjustments to the output gain
  • Grove compatible interface
  • Built-in signal filtering
RM22.50
RM25.00
  • Walk-In Price: RM13.6
  • Warranty: 12 Months (T&C Apply)
  • Grove compatible interface
  • 2.0cm x 2.0cm twig module
  • Minimum external parts
  • 10W rating
  • Rugged encapsulation
RM11.50
RM16.50
  • Walk-In Price: RM20.00
  • Warranty: 12 Months (T&C Apply)
  • Battery: Exclude
  • Operating voltage: 3.3~5V
  • Operating current: 35mA
RM18.00
RM20.00
  • Walk-In Price: RM9.1
  • Warranty: 12 Months (T&C Apply)
  • Grove compatible interface
  • 3.3V/5V Compatible
  • Battery: Exclude
RM7.90
RM11.50
  • Walk-In Price: RM28.00
  • Warranty: 12 Months (T&C Apply)
  • I2C serial interface
  • 5V DC supply
  • Programmable Square-Wave output signal
  • Automatic Power-Fail detect and switch circuitry
  • Consumes less than 500nA in Battery-Backup Mode with Oscillator Running
RM25.00
RM29.00
  • Walk-In Price: RM12.50
  • Warranty: 12 Months (T&C Apply)
  • Uses a thermistor to measure ambient temperature
  • The operating range is -40 to 125°C , with an accuracy of 1.5°C 
  • Grove compatible interface
  • Arduino library ready
RM10.50
RM13.00
  • Walk-In Price: RM15.50
  • Warranty: 12 Months (T&C Apply)
  • Grove compatible interface 
  • 2.0-5.5V DC supply 
  • response time max about 60mS at fast mode, 220mS at low power mode @VDD=3V 
  • Low power consumption 
RM13.50
RM18.00
  • Walk-In Price: RM14.00
  • Warranty: 12 Months (T&C Apply)
  • Dimension: 24 * 20 * 9.8 mm
  • Weight: G.W 7g
  • Battery: Exclude
RM12.00
RM16.50
  • Walk-In Price: RM12.50
  • Warranty: 12 Months (T&C Apply)
  • The sensor is made up of interlaced traces of Ground and Sensor signals
  • The sensor traces are weakly pulled up using 1 MΩ resistor
  • Grove compatible interface
  • High sensitivity
RM10.50
RM13.00
  • Walk-In Price: RM9.1
  • Warranty: 12 Months (T&C Apply)
  • Dimensions: 20mm x 20mm x 18mm
  • Weight: G.W 7g
  • Battery: Exclude
  • Operate Voltage:3.3v / 5v
RM7.90
RM11.50
  • Walk-In Price: RM509
  • Warranty: 12 Months (T&C Apply)
  • GrovePi+ is compatible with most of Raspberry Pi main board
  • CE certified and compatible with Linux and Win 10 IoT
  • Easy to setup and interface, plug and use connections
RM499.00
RM539.90
  • Walk-In Price: RM28.00
  • Warranty: 1 Month (T&C Apply)
  • 2.1V to 3.6V Supply Voltage
  • Low power consumption - 0.15uA typical
  • I2C interface
  • Resolution: 0.04%RH, 0.02°C
  • Accuracy: ±2%RH, ±3°C
RM25.00
RM28.90
  • Walk-In Price: RM10.90
  • Warranty: 1 Month (T&C Apply)
  • PCB Immersion Gold process
  • Model: GY-273
  • Chip: QMC5883L
  • Power supply: 3-5 v
  • Communication: IIC communication protocol
  • Measuring range: + / - 1.3-8 gaussian
RM9.90
RM13.90
  • Walk-In Price: RM24.20
  • Warranty: 1 Month (T&C Apply)
  • Easy to assemble and compatible with High Speed SMT Assembly
  • Automatically maintains sensor's sensitivity under wide operating temperature range
  • Maximizes sensor's full dynamic range and resolution
  • I2C and SPI interface
RM20.00
RM26.50
  • Walk-In Price: RM8.50
  • Warranty: 1 Month (T&C Apply)
  • HMC5983 high-precision triaxial compass magnetic field sensor with temperature compensation
  • Power supply: DC3-5V
  • Automatic offset compensation;
  • Heading angle accuracy of 1-2 degrees.
RM7.50
RM14.90
  • Walk-In Price: RM7.00
  • Warranty: 1 Month (T&C Apply)
  • Power supply: 3V-5V
  • Illumination range :0-65535 lx
  • The sensor built 16bit AD converter
  • Direct digital output, complex calculation is omitted, omitting calibration
  • Built-in communication converter to connect directly to microcontroller io interface
RM6.00
RM7.50
  • Walk-In Price: RM21.40
  • Warranty: 1 Month (T&C Apply)
  • Model: GY-35
  • Chip: ENC-03RC  
  • Power supply: 3-5V
  • Output: Analog Output  
RM19.50
RM21.50
  • Walk-In Price: RM14.00
  • Warranty: 1 Month (T&C Apply)
  • High quality Immersion Gold pcb, machine welding process, quality assurance
  • Name the: L3G4200D modules (three-axis gyroscope module)
  • Using the chip: L3G4200D
  • Power supply: 3-5V
  • Means of communication: IIC / SPI communication protocol
  • Measuring range: 250/500/2000 dps 
RM12.00
RM15.00
  • Walk-In Price: RM20.90
  • Warranty: 1 Month (T&C Apply)
  • Onboard 3.3V
  • Low Drop voltage regulator with input range of 3.6V to 6V.
  • 3 magnetic field axis and 3 acceleration axis
  • Full scale range of ± 1.3 to ±8.1 gauss magnetic field
  • ±2g/±4g/±8g/±16g user selectable full-scale acceleration ranges
  • 16 bit data output
  • I2C serial interface
  • Embedded temperature sensor
  • 6DOF orientation detection
RM18.90
RM20.90
  • Walk-In Price: RM26.90
  • Warranty: 1 Month (T&C Apply)
  • Use the chip: MPU-6050
  • Power supply : 3-5v (internal low dropout regulator)
  • Communication modes: standard IIC communication protocol
  • Chip 16bit AD converter, 16-bit data output
  • The gyroscopes range: ± 250 500 1000 2000 ° / s
  • Acceleration range: ± 2 ± 4 ± 8 ± 16g
  • Immersion Gold PCB, machine welding process to ensure quality
  • Pin pitch 2.54mm
RM23.90
RM29.90
  • Walk-In Price: RM14.50
  • Warranty: 1 Month (T&C Apply)
  • Model: GY-61
  • Chip: ADXL335
  • Power supply: 3-5V
  • Analog X, Y, Z three-axis output
RM12.50
RM14.90
  • Walk-In Price: RM29.90
  • Warranty: 1 Month (T&C Apply)
  • Chip: BMP085
  • Power supply: 3-5v
  • Communication Protocol: IIC 
  • Reaction time: 7.5ms
  • Standby current: 0.1μA
RM26.90
RM29.90
  • Walk-In Price: RM22.00
  • Warranty: 1 Month T&C Apply)
  • Chip: MPU-6500
  • Power supply:3-5v (Internal low dropout regulator)
  • Communication: Standard IIC communication protocol
  • 16-bit AD converter for 16 output data
RM20.00
RM25.90
  • Walk-In Price: RM25.40
  • Warranty: 1 Month (T&C Apply)
  • Model: GY-652
  • Chip: HMC5983 + BMP180
  • Power supply :3-5v (internal low dropout regulator)
RM22.50
RM24.90
  • Walk-In Price: RM14.00
  • Warranty: 1 Month (T&C Apply)
  • 1.8V to 3.6V Supply Voltage 
  • Low power consumption - 0.5uA at 1Hz 
  • I2C interface 
  • Max I2C Speed: 3.5Mhz 
RM12.00
RM14.90
  • Walk-In Price: RM38.30
  • Warranty: 1 Month (T&C Apply)
  • Model: HMC5883L+BMA180+ITG3205+BMP085 Module Fight Control Module
  • Communication modes: standard IIC communication protocol (fully compatible with the system 3-5v)
  • Machine welding process to ensure quality standard 2.54mm pin spacing
  • Power supply:3-5v (internal low dropout regulator)
RM35.00
RM49.00
  • Walk-In Price: RM23.60
  • Warranty: 1 Month (T&C Apply)
  • 9-axis attitude sensor
  • Gyro-chip 16bit AD converter, 16-bit data output
  • Using chips: LSM303DLH + MPU-3050
  • Power supply: 3-5v (internal low dropout regulator)
  • Communication: Standard IIC communication protocol (fully compatible with 3 - 5V system)
RM20.50
RM68.50
  • Walk-In Price: RM39.60
  • Warranty: 1 Month (T&C Apply)
  • 9 axis module
  • Immersion Gold PCB process
  • Chip: ITG3205 + ADXL345 + HMC5883L
  • Power Supply :3-5v
RM35.00
RM39.50
  • Walk-In Price: RM57.00
  • Warranty: 12 Months (T&C Apply)
  • Rated voltage: 12VDC
  • No load current: < 0.3A
  • No load speed: 1100 RPM
  • Rated load torque: 49mN.m (0.5kgf.cm)
  • Rated load speed: 865 RPM
RM52.00
RM55.00
  • Walk-In Price: RM28.50
  • Warranty: 1 Month (T&C Apply)
  • Standard length: 24CM
  • High quality
  • White Color
  • Work with Laptop/Notebook, PC, DVD, Xbox 360 and other device with HDMI port
RM25.50
RM30.00
  • Walk-In Price: RM5.00
  • Warranty: 1 Month (T&C Apply)
  • Material: 2mm Aluminium plate
  • Table: sandblasting oxidation
  • Size: 25mm x 63mm (u-shaped bracket 20 mm long)
  • Weight: 16 g
  • Color: Silver
RM4.50
RM6.50
  • Walk-In Price: RM4.50
  • Warranty: 1 Month (T&C Apply)
  • Operating Voltage 3.3V to 5.5V
  • Length: 30mm
  • Width: 15mm
  • Height: 10mm
  • Weight: 1.50g
RM4.00
RM5.00
  • Walk-In Price: RM79.10
  • Warranty: 1 Month (T&C Apply)
  • Max Frequency 16MHz
  • RAM Capacity 2K
  • FLASH Capacity 32K

 

RM69.00
RM78.00
  • Walk-In Price: RM154
  • Warranty: 12 Months (T&C Apply)
  • Length (with protective cover):17.7cm(6.97")
  • Diameter:2.74cm(1.08")
  • Wire Length:5m(196.85")
RM149.00
RM212.90
  • Walk-In Price: RM8.00
  • Warranty: 1 Month (T&C Apply)
  • Working voltage: DC 3.3V-5V
  • Working current: ≥ 20mA
  • Operating temperature: 0degree~+50degree
  • Detection distance: 1.5cm (tested with white paper)
  • Outout Interface: 3 wire
  • Output signal: TTL level (Black or no Obstacle = HIGH, White or obstacle = LOW)
RM7.00
RM10.00
  • Walk-In Price: RM52.5
  • Warranty: 12 Months (T&C Apply)
  • Dual axis mini joystick 
  • Connects to your Arduino using male to male pin headers
  • Comes with 2 colored push buttons
RM48.50
RM57.00
  • Walk-In Price: RM120.5
  • Warranty: 12 Months (T&C Apply)
  • Development board specially designed to do just that
  • Act as a USB host and supply charging current to your device
  • IOIO-OTG will assume device mode and present itself as a virtual serial port
  • Can be upgraded without needing a programmer using the IOIODude application
  • Fixed the problems that plagued the previous version making it a true vision of how the board is intended
RM115.50
RM165.00
  • Walk-In Price: RM33.00
  • Warranty: 12 Months (T&C Apply)
  • 4 buttons to test module
  • LED status indicator of relay
  • Support Xbee IO directly control
  • Xbee socket for wireless communication
RM30.00
RM39.00
  • Walk-In Price: RM32.00
  • Warranty: 1 Month (T&C Apply)
  • Model: GS1525
  • PCB Type: Positive Active Presensitized
  • Single Sided
RM29.00
RM39.50
  • Walk-In Price: RM24.80
  • Warranty: 1 Month (T&C Apply)
  • 3-axis angular rate sensor (yaw, pitch & roll) make it great for model aircraft navigation systems.  
  • Supports both I2C and SPI for whichever method of communication you desire.  
  • Three selectable scales: 250/500/2000 degrees/sec (dps)  
  • Embedded power down and sleep mode to minimize current draw  
  • 16 bit-rate value data output  
RM21.50
RM43.50
  • Walk-In Price: RM95
  • Warranty: 12 Months (T&C Apply)
  • Product Dimensions: 90.0mm x 50.0mm x 24.0mm / 3.5" x 2.0" x 0.9"
  • Product Weight: 61.6g / 2.2o
  • Use this meter to find out if your voltage is too low or your current draw is too high
RM90.00
RM110.00
  • Walk-In Price: RM60.00
  • Warranty: 12 Months (T&C Apply)
  • With a 16 bit AD converter built-in which can directly output a digital signal
  • There is no need for complicated calculations
  • More acurate and easier to use version of the simple foto resistor
RM55.00
RM63.00
  • Walk-In Price: RM14.00
  • Warranty: 1 Month (T&C Apply)
  • Audio amplifier chip LM386
  • Operating voltage: DC3V~12V 
  • Low distortion
  • Speaker power: 0.5W-10W
RM12.00
RM15.00
  • Walk-In Price: RM0.50
  • Warranty: 1 Month (T&C Apply)
  • Material: Mild Steel
  • Type: Pan Head Philips
  • Thread size: M3
  • Length, L (mm): 25
RM0.40
RM0.50
  • Walk-In Price: RM4
  • Warranty: 1 Month (T&C Apply)
  • Working voltage: 3.3v-5v
  • Dimensions: 20 x 18 x 15mm
  • Operating Voltage: 5V
  • Weight: 1.83g
RM3.50
RM5.00
  • Walk-In Price: RM205
  • Warranty: 12 Months (T&C Apply)
  • Diameter:152mm
  • Width:55.52mm
  • Number of Rollers:15
  • Number of Plates:2
RM200.00
RM250.00
  • Walk-In Price: RM205
  • Warranty: 12 Months (T&C Apply)
  • Diameter:152mm
  • Width:55.52mm
  • Number of Rollers:15
  • Number of Plates:2
RM200.00
RM250.00
  • Walk-In Price: RM80
  • Warranty: 12 Months (T&C Apply)
  • Diameter:60mm
  • Width:31mm
  • Number of Rollers:8
  • Number of Plates: 2
RM75.00
RM80.00
  • Walk-In Price: RM80
  • Warranty: 12 Months (T&C Apply)
  • Diameter:60mm
  • Width:31mm
  • Number of Rollers:8
  • Number of Plates: 2
RM75.00
RM80.00
  • Walk-In Price: RM31
  • Warranty: 12 Months (T&C Apply)
  • Operating Voltage: 1.0~6.0V
  • Motor Speed: 500 rpm@6V
  • Gear Ratio: 30:1
  • Rated Speed: 443 rpm@6V
  • Rated Current: 40mA@6V
  • Stall Current: 100mA@6V
  • Stall Torque: 1.2kg*cm@6V
RM28.00
RM35.00
  • Walk-In Price: RM5.50
  • Warranty: 1 Month (T&C Apply)
  • Acrylic Case for Micro:Bit
  • Special design to protect Micro:Bit
  • Simple & Quick Installation
  • User friendly easy to use
RM5.00
RM6.00
  • Walk-In Price: RM43.5
  • Warranty: 12 Months (T&C Apply)
  • 3-Pin fool-proof connector x 6
  • Headphone jack with volume knob
  • External power port and ON/OFF switch
RM39.50
RM49.50
  • Walk-In Price: RM180
  • Warranty: 12 Months (T&C Apply)
  • STM32F405RG microcontroller
  • 168MHz Cortex M4 CPU with hardware floating point
  • 1024KiB flash ROM and 192KiB RAM
RM175.00
RM250.00
  • Walk-In Price: RM129.00
  • Warranty: 1 Month (T&C Apply)
  • Model: DC-S030
  • Battery Voltage: 24-36V
  • No Load Speed: 9000-14500RPM
  • Keyless Chuck: 0.3-4mm
  • Grinder Weight: 0.36kg
RM125.00
RM155.00
  • Walk-In Price: RM28.00
  • Warranty: 12 Months (T&C Apply)
  • Polarization: Vertical
  • Connector: SMA Male (Option)
  • Impedance: 50Ω
RM25.00
RM34.90
  • Walk-In Price: RM304
  • Warranty: 12 Months (T&C Apply)
  • ​Micro USB for download the code(bootloader: Leonardo)
  • A compass inside
  • WS2812 RGB LED for controlling the color by only one pin
  • Soft buttons for giving you more comfortable feeling
  • Two Infrared transmitters and 1 infrared receiver for obstacle detection and avoidance
RM299.00
RM395.00
  • Walk-In Price: RM113
  • Warranty: 12 Months (T&C Apply)
  • Encoder Specification
    • Working Voltage:3.3V or 5V
    • Working Current:<14mA @5V 
    • Pulse Output:48 per revolution
    • Compatibility:42mm x 19mm (1.65x0.75") wheel
  • Motor Specification
    • 13000 rpm @ No load
    • 50:1 Gear ratio
    • 260 rpm @ 6V
    • 40mA @ 6V
    • 360mA stall current @ 6V
    • 10 oz inches torque @ 6V
RM108.00
RM135.00
  • Walk-In Price: RM14.90
  • Warranty: 1 Month (T&C Apply)
  • Small the MMA7361 module, three-axis analog accelerometer module.
  • Volume (LxWxH) 1.9cm x 1.4cm x 1.1cm
RM12.90
RM14.90
  • Walk-In Price: RM21.40
  • Warranty: 12 Months (T&C Apply)
  • Material: 5051 aluminum alloy
  • Colour: Red anodised
  • Size: 157mm x 75mm
RM19.50
RM21.50
  • Walk-In Price: RM158
  • Warranty: 12 Months (T&C Apply)
  • Learn electronics and coding with the micro:bit
  • Includes a 30 page instruction booklet
  • Control a light bulb and motor from your mico:bit and play sounds
  • Measure sound, temperature and light using your micro:bit
  • Programs supplied for Makecode blocks and MicroPython
RM155.00
RM180.00
  • Walk-In Price: RM42.3
  • Warranty: 12 Months (T&C Apply)
  • Monk Makes Power Module for micro:bit
  • Provides output of 3.3V and input of 4.5 to 12V DC
  • Features a JST battery connector attached to wires
  • Supplies up to 700mA
RM35.00
RM45.00
  • Walk-In Price: RM42.3
  • Warranty: 12 Months (T&C Apply)
  • Solid-sate relay (up to 2 Amps) with an active LED indicator
  • Resettable ‘polyfuse’ to protect against over-current
  • Allows to switch low voltage devices such as light bulbs, a motor, a small heating element or even a string of 12V LED lighting
  • Compatible with the BBC micro:bit Programmable Board
RM35.00
RM45.00
  • Walk-In Price: RM42.3
  • Warranty: 12 Months (T&C Apply)
  • Sensor Board with a LED ‘power on’ indicator
  • Detects sound level with a MEMs (microphone on a chip) and a pre-amplifier
  • Uses a thermistor to measure temperature
  • Light level detection with a phototransistor (0 to 1023)
RM35.00
RM45.00
  • Walk-In Price: RM42.3
  • Warranty: 12 Months (T&C Apply)
  • Servo Controller for micro:bit Monk Makes
  • Features header pins for three servo motors
  • Its regulated 3V output power your micro:bit
  • It offers polarity protection and an electrolytic reservoir capacitor
RM35.00
RM45.00
  • Walk-In Price: RM42.3
  • Warranty: 12 Months (T&C Apply)
  • Neat little amplified speaker
  • Amplified output and reverse polarity protection
  • LED ‘power on’ indicator
  • Compatible with the BBC micro:bit Programmable Board
RM35.00
RM45.00
  • Walk-In Price: RM52
  • Warranty: 12 Months (T&C Apply)
  • Can drive 4 DC Motors or 2 Stepper Motors
  • Can drive 6 Servos
  • Mbed Platform
  • STM32F0 coprocessor
  • Two TB6612FNG
  • Communicate with BBG by I2C or UART interface
RM48.00
RM80.00
  • Walk-In Price: RM100
  • Warranty: 12 Months (T&C Apply)
  • Supply Voltage: 3.3V to 5V
  • Power LED on board
  • Size:52x37mm(2.05X1.45")
RM95.00
  • Walk-In Price: RM14.00
  • Warranty: 1 Month (T&C Apply)
  • 4 digit 7-segment LED display module driven by two serial 74HC595's
  • 4 x surface mount LED's in a parallel configuration
  • DS18B20 temperature sensor interface
  • LM35 temperature sensor interface
RM12.00
RM15.00
  • Walk-In Price: RM9.3
  • Warranty: 12 Months (T&C Apply)
  • This is the MyoWare Proto Shield, a simple proto-board for your MyoWare Muscle Sensor.
  • With this shield you will be able to use the area provided to solder on whatever custom circuitry you can come up with.
  • This shield provides 8 x 15 solderable through holes on a standard 0.1" grid.
  • The MyoWare Proto Shield is equipped with two rows of 3-pin plated through holes on each end of the board.
  • This allows for standard 0.1" headers to be used to stack the shield with other MyoWare boards.

 

RM8.50
RM16.50
  • Walk-In Price: RM71
  • Warranty: 12 Months (T&C Apply)
  • Working Voltage: 3.3v or 5v
  • Host interface: UART
  • Default Band rate: 115200 bps
  • Integrate PN532 NFC controller
  • Supports ISO 14443A/MIFARE
  • Supports ISO 14443B in reader/writer mode only
RM66.00
RM82.50
  • Walk-In Price: RM140
  • Warranty: 12 Months (T&C Apply)
  • Image Sensor: 5MP OV5647, No IR filter, sensitive to IR
  • Lens: LS-2718
  • Mount: CS
  • FOV: 60°, interchangeable
  • Interface: CSI-2/MIPI, 15pin FFC included
  • Form Factor: 36mm x 36mm
  • Need cable to work with Pi Zero/W
RM135.00
RM169.00
  • Walk-In Price: RM39.1
  • Warranty: 12 Months (T&C Apply)
  • Add quadrature encoders to your LP, MP, or HP micro metal gearmotors 
  • This kit consisting of two sensor boards, two 3-tooth encoder wheels, and two 5-tooth encoder wheels
  • The installed system does not exceed the 12 mm × 10 mm cross section of the motors and extends only 5 mm beyond the plastic motor end cap
  • The 3-tooth wheel provides 12 counts per revolution; using the 5-tooth wheel yields 20 counts per revolution
  • This version is intended for use at 5 V.
RM35.00
RM39.00
  • Walk-In Price: RM38.3
  • Warranty: 12 Months (T&C Apply)
  • Microcontroller: ATmega328
  • Operating Voltage: 5V
  • Input Voltage: 7-9V
RM34.50
RM49.00
  • Walk-In Price: RM74.00
  • Warranty: 12 Months (T&C Apply)
  • Microcontroller board based on the ATmega32u4
  • Developed in conjunction with Adafruit
  • Simply connect it to a computer with a micro USB cable
  • Easily placed on a breadboard.
RM69.00
RM100.00
  • Walk-In Price: RM104.50
  • Warranty: 12 Months (T&C Apply)
  • Working Temperature: 0℃ - 40 ℃
  • Motor voltage: 12VDC
  • Motor current: 200-300mA
  • Flow rate: up to 100 mL/min
RM99.50
RM165.00
  • Walk-In Price: RM4.50
  • Warranty: 1 Month (T&C Apply)
  • Weight(g):10.00
  • Length(mm):90.00
  • Width(mm):15.00
  • Height(mm):75.00
RM4.00
RM5.00
  • Walk-In Price: RM43.5
  • Warranty: 12 Months (T&C Apply)
  • Compatible with Raspberry Pi Model B/A Kit Contents
  • Saves Space & Power, Display Status Info, Messages, Menus
  • Flexible control of the Raspberry Pi is enhanced with an IR remote control or the onboard buttons.
RM39.50
RM79.00
  • Walk-In Price: RM60
  • Warranty: 12 Months (T&C Apply)
  • Control Plug & Play Board with Display
  • Compatible with Raspberry Pi 2 Model B, Raspberry Pi Model B+/A+
  • SVHC: To Be Advised
RM55.00
RM110.00
  • Walk-In Price: RM40.5
  • Warranty: 12 Months (T&C Apply)
  • Ore Architecture:     ARM
  • Core Sub-Architecture:     ARM11
  • Silicon Core Number:     BCM2835
  • Silicon Family Name:     BCM2xxx
  • Silicon Manufacturer:     Broadcom
RM36.50
RM73.00
  • Walk-In Price: RM11.00
  • Warranty: 12 Months (T&C Apply)
  • Ball material: plastic
  • Ball diameter: 0.375 in
  • Weight: 0.8 g
RM10.00
RM17.90
  • Walk-In Price: RM17.00
  • Warranty: 12 Months (T&C Apply)
  • This compact bracket enables convenient mounting of popular, Sanyo-style micro metal gearmotors
  • The black plastic bracket encloses the otherwise exposed gears, and the mounting tabs capture the nuts for easy installation
RM15.00
RM27.50
  • Walk-In Price: RM33.00
  • Warranty: 12 Months (T&C Apply)
  • Mount Pololu’s 37D mm metal gearmotors to your project
  • Sold in pairs (Includes 6 M3 screws)
  • 14 mounting holes for M3 or #4-size screws (not included)
RM30.00
RM35.00
  • Walk-In Price: RM17.00
  • Warranty: 12 Months (T&C Apply)
  • Silicone tires measuring 32 mm (1.26″) in diameter 
  • Press-fit onto the 3mm D output shafts
  • Including micro metal gearmotors and mini plastic gearmotors
  • Sold in pairs
RM15.00
RM25.00
  • Walk-In Price: RM80.00
  • Warranty: 12 Months (T&C Apply)
  • Proton Wira Power Window Compatible
  • Right car door
  • Voltage Rating: 12VDC
RM75.00
RM82.00
  • Walk-In Price: RM13.30
  • Warranty: 1 Month (T&C Apply)
  • Connector Types: Both sides are VGA 15-pin male
  • Suitable for CRT/LCD monitor and TV
  • Cable length: 1.5M
RM11.50
RM22.50
  • Walk-In Price: RM28.50
  • Warranty: 1 Month (T&C Apply)
  • Input: HDMI male  
  • Output: VGA + Audio 
  • Audio length: 50cm
RM25.50
RM30.00
  • Walk-In Price: RM28.00
  • Warranty: 1 Month (T&C Apply)
  • solid copper conductors and gold-plated solid metal shielded connectors
  • Supported Resolutions: up to 4K*2K (3840 x 2160)
  • Length : 1.5m (150cm)
RM25.00
RM27.50
  • Walk-In Price: RM33.00
  • Warranty: 12 Months (T&C Apply)
  • Comfortable Non-Slip Handle
  • Return Leaf Spring
  • Adjustable Screw
  • OAL: 138mm
RM30.00
RM37.00
  • Walk-In Price: RM164
  • Warranty: 12 Months (T&C Apply)
  • 5 pcs High Speed Steel Drills (ø0.5, 1.0, 1.5, 2.5, 3.0mm)
  • 5 pcs Brass collets (ø0.5, 1.0, 1.5, 2.5, 3.0mm)
  • 4 pcs Grindstones with arbour
  • 1 pcs Super Thin Grinding Wheels
  • Case: 215x145x70 mm
  • Adapter output: DC 12V/0.8A D/J ø5.5/ø2.1
RM159.00
RM200.00
  • Walk-In Price: RM120.2
  • Warranty: 12 Months (T&C Apply)
  • 3 1/2 digits 1999 counts
  • 0.8% best accuracy
  • Auto range.
  • Portable and simple one-hand operation
  • Extra function: Maximum value hold, data hold, auto power off, low battery indication
  • Max. Jaw opening: max. 30mm
RM115.00
RM128.00
  • Walk-In Price: RM27.00
  • Warranty: 12 Months (T&C Apply)
  • Safety lock for easy storage.
  • Multi-conductor cables up to 0.5" (12.7mm)
  • Strand wire up to 8 AWG (10mm²)
RM24.00
RM27.50
  • Walk-In Price: RM53.00
  • Warranty: 12 Months (T&C Apply)
  • For crimping IDC-type connectors
  • Durable steel frame, easy to assemble flat cable on to IDC-type connectors.
  • Crimping distance: height from 6-27.5mm, max width:55mm
  • OAL: 240mm
RM49.00
RM59.00
  • Walk-In Price: RM20.00
  • Warranty: 12 Months (T&C Apply)
  • Spring assisted chip carrier extraction tool
  • Specially designed for the safe removal of PLCC's from sockets
  • Without damage to component parts
RM18.00
RM21.00
  • Walk-In Price: RM12.50
  • Warranty: 12 Months (T&C Apply)
  • Simple tool for stripping the UTP/STP cable.
  • It can extract the jacket of cable by stripping in the circles of the tool.
  • OAL: 94mm
RM10.50
RM12.50
  • Walk-In Price: RM31.00
  • Warranty: 12 Months (T&C Apply)
  • Used for repetitive punching or riveting
  • Adjustable for light or heavy stokes
  • Working part material: high carbon steel
 
RM28.00
RM31.50
  • Walk-In Price: RM36.00
  • Warranty: 12 Months (T&C Apply)
  • Positive safety latch function. 
  • With double color non-slip handle, smooth operation. 
  • Stainless steel spring and blades resist rust and corrosion. 
RM32.00
RM37.50