CLEARANCE
- Walk-In Price: RM110
- Warranty: 12 Months (T&C Apply)
- Image Sensor: 5MP OV5647
- Lens: Stock lens, FOV: 60°
- Interface: CSI-2/MIPI
- Camera width: 8.5mm, neck width 6mm, cable length 300mm
- Need adapter to work with Pi Zero/W
RM105.00
RM115.00
- Walk-In Price: RM140
- Warranty: 12 Months (T&C Apply)
- Wide power input range from 3 to 8 volts
- Low noise LDO regulator
- LED power indication
- Integrate 10 dof sensors
- Compact size design and easy-to-use
- Compatible with Arduino controllers
RM135.00
RM165.00
![10Amp 6V-24V DC Motor Driver HAT for RPI (2 Channels) [PROMO PRICE]](https://www.autobotic.com.my/image/autobotic/image/cache/defaultlazyload-420x420.jpg)
- Walk-In Price: RM80.00
- Warranty: 12 Months (T&C Apply)
- Bi-directional control for two brushed DC motor
- Support motor voltage ranges: 6VDC - 24VDC.
- Every channel output built with LED indicator.
- Current limiting: 30A.
RM75.00
- Walk-In Price: RM62.00
- Warranty: 12 Months (T&C Apply)
- Bi-directional control for 1 brushed DC motor
- Support motor voltage ranges from 7V to 25V (Rev1.0), 7V to 30V (Rev2.0)
- Max current: up to 10A continuous and 15A peak
- 3.3V and 5V logic level input
- Speed control PWM: up to 10KHz
RM57.00
- Walk-In Price: RM49.00
- Warranty: 12 Months (T&C Apply)
- Dimensions : 40.8 × 20.1 × 38 mm
- Weight : 56 g
- Operating Speed : 0.18sec/60degree (4.8V) | 0.16sec/60degree (6V)
RM45.00
RM51.50
- Walk-In Price: RM49.00
- Warranty: 12 months (T&C Apply)
- Material: Aluminum-Alloy
- Inside Diameter: 10mm
- Outside Diameter: 57mm
- Bore Length: 25mm
- Net Waight: 54g
RM45.00
- Walk-In Price: RM105
- Warranty: 12 Months (T&C Apply)
- Powerful brushed DC motor with 131.25:1 metal gearbox intended
- Operation: 12V
- 16 mm-long with 6 mm-diameter D-shaped output shaft
- Available with an integrated encoder
RM100.00
RM115.00
- Walk-In Price: RM56.8
- Warranty: 12 Months (T&C Apply)
- Control System: Digital Programmable
- Direction: CW
- Required Pulse: 500~2500us
- Bearing Type: 2BB
- Connector Wire Length: 30 cm
RM51.50
RM57.50
- Walk-In Price: RM31
- Warranty: 12 Months (T&C Apply)
- 5V voltage regulator (1A max)
- 20MHz oscillator
- Reset button
RM28.00
RM35.00
- Walk-In Price: RM39.10
- Warranty: 1 Month (T&C Apply)
- Material: Aluminium
- Clamp Max open is 55mm
- Clamp total length:108mm
- Clamp total width: 98mm (Clamp close)
- Working voltage: 4.8-6V (Clamp open)
RM35.00
RM36.90
- Walk-In Price: RM43.60
- Warranty: 1 Month (T&C Apply)
- 0.1 inch (2.54mm) standard pitch pin header, easy for prototyping
- Onboard 2.8V,1.8V LDO regulator, single 3.3V supply needed.
- DigitalClarity CMOS imaging technology
- Ultra low-power, low-cost, progressive scan
- 2-megapixel resolution (1,600H x 1,200V)
- 1/3.2-inch optical format
RM39.50
RM49.50
- Walk-In Price: RM71.5
- Warranty: 12 Months (T&C Apply)
- 2.8" diagonal LCD TFT display datasheet
- 240x320 resolution, 18-bit (262,000) color capable - our code uses only 16-bits since its faster.
- ILI9341 (datasheet) controller with built in video RAM buffer
- 69mm x 50mm x 4mm / 2.7" x 2" x 0.2"
- Weight: 24g
RM66.50
RM95.00
- Walk-In Price: RM2.50
- Warranty: 1 Month (T&C Apply)
- Good choice for your projects
- Use for indicator signal, accident signal, fault signal and others
- Long life and low energy consumption
RM2.00
RM2.50
- Walk-In Price: RM32.2
- Warranty: 12 Months (T&C Apply)
- Industrial grade PCB.
- Every board is being tested before it is shipped out.
- Compact platform and breadboard-friendly
- Suitable for hobbyists and expert.
RM29.00
RM36.50
- Walk-In Price: RM44.5
- Warranty: 12 Months (T&C Apply)
- Model No.: FT-MC-001
- Scale: 1:10
- Certification: CE, RoHS
- Drive: 2WD
- Work voltage: 4.5 ~ 6V
RM40.50
RM45.00
- Walk-In Price: RM72.5
- Warranty: 12 Months (T&C Apply)
- Weight: 150g
- Size(L*W*H): 170mm*100mm*60mm
- Weight: 138g
RM67.50
RM75.00
- Walk-In Price: RM43.50
- Warranty: 12 Months (T&C Apply)
- 2 way 7-12V motor drive
- Up to 1A current each way
- PIN 4,5,6,7 are used to drive two DC motors
- Support PWM speed control
RM39.50
RM46.00
- Walk-In Price: RM194
- Warranty: 12 Months (T&C Apply)
- Can be used in 4WD mobile robot platforms
- Uses 4 high-performance & high-current driver chips (BTS7960)
- Protective functions: Current short, over temperature and over voltage
- Can control 2 motors with only 4 digital IO at the same time
- Compatible with Arduino
RM189.00
RM210.00
- Walk-In Price: RM85
- Warranty: 12 Months (T&C Apply)
- Uses a 128x64 liquid crystal display that support Chinese character, English characters and even graphics
- Suitable for interactive work with Arduino
- A backlit control, pallerlel or serial control, contrast adjust
- Can be connect to our interface shield for arduino via IDC6 socket and Cable for Shiftout
- Default in parallel mode
RM80.00
RM95.00
- Walk-In Price: RM31.00
- Warranty: 12 Months (T&C Apply)
- Module Interface: Arduino Compatible
- Occupied Port: Digital Port 3,8,9,10,11
- Operating Frequency: 315MHz
- Operating Current: 10mA(Maximum)
RM28.00
RM31.50
- Walk-In Price: RM32.50
- Warranty: 1 Month (T&C Apply)
- High quality aluminum heatsink/heat sink holder
- For 12mm laser modules like 12mm red, green and IR laser modules
- Help to cool the laser to prolong the working time of laser mdoules
RM29.50
RM34.90
- Walk-In Price: RM60.00
- Warranty: 12 Months (T&C Apply)
- Help kids or novice electronic enthusiasts learn about things like soldering and simple knowledge of circuit
- Designed with ambient light level
- There is no programming involved
RM55.00
RM69.00
- Walk-In Price: RM63.5
- Warranty: 12 Months (T&C Apply)
- Weight: 150g
- Size(L*W*H): 170mm*100mm*60mm
- Weight: 138g
RM58.50
RM65.00
- Walk-In Price: RM81.5
- Warranty: 12 Months (T&C Apply)
- Weight: 150g
- Size(L*W*H): 170mm*100mm*60mm
- Weight: 138g
RM76.50
RM85.00
- Walk-In Price: RM115
- Warranty: 12 Months (T&C Apply)
- Onboard LDO regulators for 2.8V and 1.8V
- Single 3.3V power input
- 2.54mm (0.1 inch) standard pin out
- Open source project www.ArduCAM.com supported
RM110.00
RM139.00
- Walk-In Price: RM46.50
- Warranty: 12 Months (T&C Apply)
- 3 μs output rise time in response to step input current
- 40 mV/A output sensitivity
- Output voltage proportional to AC or DC currents
- Factory-trimmed for accuracy
RM42.50
RM50.00
- Walk-In Price: RM44.00
- Warranty: 12 Months (T&C Apply)
- Working voltage: 3~5v
- I2C Digital-output of 6 or 9-axis MotionFusion data in rotation matrix, quaternion, Euler Angle, or raw data format
- Tri-Axis angular rate sensor (gyro) with a sensitivity up to 131 LSBs/dps and a full-scale range of ±250, ±500, ±1000, and ±2000dps
- Tri-Axis accelerometer with a programmable full scale range of ±2g, ±4g, ±8g and ±16g
RM40.00
RM45.00
- Walk-In Price: RM57.5
- Warranty: 12 Months (T&C Apply)
- Output: DC 8.5V 1.5A
- Interface: DC 2.1mm (Female/Male) (Arduino compatible)
- Led Indicator: Red (charging), Green (charged), Green Flash (protection mode triggered)
- Support Battery: 7.4V Lipo Battery (2-cell pack)
RM52.50
RM75.00
- Walk-In Price: RM32.90
- Warranty: 12 Months (T&C Apply)
- 8x8 dot matrix display assembled
- Power supply: 5v
- Max current consumption: 300mA
- LED color: RGB tri-color LEDs
- Directly support Arduino
RM29.90
RM165.00
- Walk-In Price: RM100
- Warranty: 12 Months (T&C Apply)
- 128x64 OLED Screen
- Buzzer, RGB LED
- DHT11 Temperature&Humidity Sensor
- 1.5A Relay
- Helical Potentiometer
- Mini Joystick
RM95.00
RM115.00