CABLES
- Withstand Voltage: <50V
- Withstand Current: <1000mA
- Length: 30cm
- IIC/I2C/UART Pin Order: Red --- VCC
- Black ---GND
- Blue --- SCL/TX
- Green --- SDA/RX
RM31.50
- Type: QZ-2/130 Polyester enamelled round copper wire
- Voltage: above 1000V
- Core material: Pure copper
- Core diameter: 0.51mm
- Colour: copper
RM20.90
- Diameter: 0.8mm
- Lead-Free
- Contains 96.5% tin, 3% silver, 0.5% copper
- Weight: 100g
RM55.00
- Good choice for your projects and for prototyping.
- Uniform insulation thickness to ensure easy stripping and cutting
- For general purpose internal wiring of appliance
RM1.00
- Good choice for your projects and for prototyping.
- Uniform insulation thickness to ensure easy stripping and cutting
- For general purpose internal wiring of appliance
RM1.00
- Good choice for your projects and for prototyping.
- Uniform insulation thickness to ensure easy stripping and cutting
- For general purpose internal wiring of appliance
RM1.00
- Good choice for your projects and for prototyping.
- Uniform insulation thickness to ensure easy stripping and cutting
- For general purpose internal wiring of appliance
RM1.00
- These little cables are handy when programming or debugging a tiny board that uses 10-pin 1.27mm pitch SWD programming connectors.
- These connectors often on ARM Cortex dev kits
- And have a few handy in our ARM-dev box.
RM19.00
- Adapter Cable: OBD2 to DB9 Serial Port RS232
- 8 Pin Out
- Compatible with all OBD II compliant vehicles for car diagnostic scanner reader
RM55.00
- Colour: Black
- Type: Multicore 18AWG
- Material: Tinned Copper
- Maximum Current: 22A
- Working Temperature: -65°c to 200°c
- Length: 1 meter per unit (Cutted)
RM2.00
- Colour: Red
- Type: Multicore 18AWG
- Material: Tinned Copper
- Maximum Current: 22A
- Working Temperature: -65°c to 200°c
- Length: 1 meter per unit (Cutted)
RM2.00
- 3.5mm Male to 3 RCA Male
- Color: Black
- Cable length: 1.5 meter
- Standard 3.5mm Audio/ Video connector
RM9.50
- Connectors: USB Type-A Male to 4.0 x 1.7 mm Barrel Male
- Length: ~80cm
RM5.50
- Connectors: USB Type-A Male to 5.5x2.1mm Barrel Male
- Length: 90cm
- Max Current: 1A
RM4.50
- AV0.5mm
- Material: Tinned copper
- OD: 1.3mm
- ID: 0.5mm
- Length: 100m/roll
RM30.00
- red power,
- black ground,
- white RX into USB port, and
- green TX out of the USB port.
RM7.50
- Used in electrical or laboratory electric testing work
- Alligator Clip Length: ~35mm (without cover)
- Total Length: ~50cm
RM6.50
- Working temperature: -20-60℃
- Supply voltage: DC 12V
- Output: 1 channel
- Connectors: 2.1mm x 5.5mm Male & Female
- Suitable for many applications including controlling a LED strip.
RM5.00
- Easily lets you connect any RS485 or RS422 device directly to your computer's USB port
- Ideal for industrial environments
- Converter provides 15KV ESD protection on all signal pins
- Designed with a high performance quality processor chip (FTDI Chipset)
- Plug-and-Play, No power supply needed. Supports windows 10, 8, 7, Mac and more
RM91.50
- AMP Commscope
- High-Performance Cat 6 Ethernet LAN Cable
- Fire Retardant: CM
- Frequency: ≥250MHz
RM8.90
- AMP Commscope
- High-Performance Cat 6 Ethernet LAN Cable
- Fire Retardant: CM
- Frequency: ≥250MHz
RM12.90
- Compatible with Raspberry Pi B+, 2 and 3.
- Long: 21cm
- Wide: 5.5cm
- Cable: 40P
RM4.50
- 2.54mm
- Compatible with 0.1mm spacing pin headers
- Length: ~10cm
RM2.30
- 2.54mm 1P-1P pin header
- Compatible with 0.1mm spacing pin headers
- Length: ~20cm
RM2.50
- 2.54mm
- Compatible with 0.1mm spacing pin headers
- Length: ~30cm
RM3.90
- Swap out the stock 150mm long flex cable from a Raspberry Pi Camera or Raspberry Pi Display
- Works great, just carefully open the connector on the Pi and slip this one in
- Length: 1 meter
RM10.90
- Swap out the stock 150mm long flex cable from a Raspberry Pi Camera or Raspberry Pi Display
- Works great, just carefully open the connector on the Pi and slip this one in
- Length: 300mm
RM5.00
- Swap out the stock 150mm long flex cable from a Raspberry Pi Camera or Raspberry Pi Display
- Works great, just carefully open the connector on the Pi and slip this one in
- Length: 500mm
RM6.90
- Length:30cm (12 in)
- Maximum voltage:<50V
- Maximum current:<1000mA
RM27.50
- connect two servo to Grove system with only 1 cable
RM29.50