Buy Any 2 Get 50% Off
Sort by
Show result
  • Walk-In Price: RM6.9
  • Warranty: 1 Month (T&C Apply)
  • Simple, easy to install, buffer
  • Damping, convenient to disconnect, Durable in use
  • Complete and the surface is smooth
RM5.90
  • Walk-In Price: RM110
  • Warranty: 12 Months (T&C Apply)
  • Image Sensor: 5MP OV5647
  • Lens: Stock lens, FOV: 60°
  • Interface: CSI-2/MIPI
  • Camera width: 8.5mm, neck width 6mm, cable length 300mm
  • Need adapter to work with Pi Zero/W
RM105.00
  • Walk-In Price: RM53.5
  • Warranty: 12 Months (T&C Apply)
  • Sensor Size: 1/4 Inch
  • Focal Length (EFL): 3.2mm
  • F/NO (Infination): 2.0
  • Back Focal Lenth: 1.6mm
RM49.50
  • Walk-In Price: RM140
  • Warranty: 12 Months (T&C Apply)
  • Wide power input range from 3 to 8 volts
  • Low noise LDO regulator
  • LED power indication
  • Integrate 10 dof sensors
  • Compact size design and easy-to-use
  • Compatible with Arduino controllers
RM135.00
  • Walk-In Price: RM43.90
  • Warranty: 12 months (T&C Apply)
  • Material: Aluminum-Alloy
  • Inside Diameter: 10mm
  • Outside Diameter: 57mm
  • Bore Length: 25mm
  • Net Waight: 54g
RM39.90
  • Walk-In Price: RM73
  • Warranty: 12 Months (T&C Apply)
  • Rated Voltage: 12VDC
  • No load current: < 100mA
  • No load speed: 75 ± 7.5 RPM
  • Rated load torque: 294mN.m (3kgf.cm)
  • Rated current: < 600mA
  • Rated load speed: 50 ± 5 RPM
RM68.00
  • Walk-In Price: RM105
  • Warranty: 12 Months (T&C Apply)
  • Powerful brushed DC motor with 131.25:1 metal gearbox intended 
  • Operation: 12V
  • 16 mm-long with 6 mm-diameter D-shaped output shaft
  • Available with an integrated encoder
RM100.00
  • Walk-In Price: RM31
  • Warranty: 12 Months (T&C Apply)
  • 5V voltage regulator (1A max)
  • 20MHz oscillator
  • Reset button
RM28.00
  • Walk-In Price: RM3.5
  • Glass Fuse (Glass Body, Nickel Plated Cap)
  • 1A / 250V
  • Diameter: 5 x 20 mm
RM3.00
  • Walk-In Price: RM39
  • Warranty: 1 Month (T&C Apply)
  • Material: Aluminium
  • Clamp Max open is 55mm
  • Clamp total length:108mm
  • Clamp total width: 98mm (Clamp close)
  • Working voltage: 4.8-6V (Clamp open)
RM35.00
  • Walk-In Price: RM43.50
  • Warranty: 1 Month (T&C Apply)
  • 0.1 inch (2.54mm) standard pitch pin header, easy for prototyping
  • Onboard 2.8V,1.8V LDO regulator, single 3.3V supply needed.
  • DigitalClarity CMOS imaging technology
  • Ultra low-power, low-cost, progressive scan
  • 2-megapixel resolution (1,600H x 1,200V)
  • 1/3.2-inch optical format
RM39.50
  • Walk-In Price: RM2.5
  • Number of poles: 10P
  • Pitch: 2.54mm
  • Working Temperature: -25°C ~ +85°C
  • Material : Nylon UL94V-0
  • Voltage rating: 250V AC/DC
  • Current Rating: 3A AC/DC
RM2.00
  • Walk-In Price: RM1.1
  • Number of poles:5P
  • Pitch: 2.54mm
  • Working Temperature: -25°C ~ +85°C
  • Material : Nylon UL94V-0
  • Voltage rating: 250V AC/DC
  • Current Rating: 3A AC/DC
RM1.00
  • Walk-In Price: RM1.1
  • Number of poles: 6P
  • Pitch: 2.54mm
  • Working Temperature: -25°C ~ +85°C
  • Material : Nylon UL94V-0
  • Voltage rating: 250V AC/DC
  • Current Rating: 3A AC/DC
RM1.00
  • Walk-In Price: RM2
  • Number of poles: 7P
  • Pitch: 2.54mm
  • Working Temperature: -25°C ~ +85°C
  • Material : Nylon UL94V-0
  • Voltage rating: 250V AC/DC
  • Current Rating: 3A AC/DC
RM1.50
  • Walk-In Price: RM2
  • Number of poles: 8P
  • Pitch: 2.54mm
  • Working Temperature: -25°C ~ +85°C
  • Material : Nylon UL94V-0
  • Voltage rating: 250V AC/DC
  • Current Rating: 3A AC/DC
RM1.50
  • Walk-In Price: RM2
  • Number of poles: 9P
  • Pitch: 2.54mm
  • Working Temperature: -25°C ~ +85°C
  • Material : Nylon UL94V-0
  • Voltage rating: 250V AC/DC
  • Current Rating: 3A AC/DC
RM1.50
  • Walk-In Price: RM104.00
  • Warranty: 12 Months (T&C Apply)
  • No backlight, keeps displaying last content for a long time even when power down
  • Ultra low power consumption, basically power is only required for refreshing
  • Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano
RM99.00
  • Walk-In Price: RM32
  • Warranty: 12 Months (T&C Apply)
  • Industrial grade PCB.
  • Every board is being tested before it is shipped out.
  • Compact platform and breadboard-friendly
  • Suitable for hobbyists and expert.
RM29.00
  • Walk-In Price: RM9.5
  • Warranty: 1 Month (T&C Apply)
  • 3.5mm Male to 3 RCA Male
  • Color: Black
  • Cable length: 1.5 meter
  • Standard 3.5mm Audio/ Video connector
RM8.50
  • Walk-In Price: RM25
  • Warranty: 1 Month (T&C Apply)
  • Fully assembled & tested, no soldering required
  • It is designed to fit the entire electronics needed for a RepRap in one small package for low cost
  • The modular design includes plug in stepper drivers and extruder control electronics on an Arduino MEGA shield for easy service, part replacement, upgrade-ability and expansion
RM22.00
  • Walk-In Price: RM33
  • Warranty: 1 Month (T&C Apply)
  • Adopt optocoupler
  • 4 channel
  • Limit Conversion Frequency: 20KHz
  • Mounting bracket for DIN rail
  • It can be used for signal isolation
RM30.00
  • Walk-In Price: RM11
  • Banana type
  • Female
  • Solid hard plastic shell
RM10.00
  • Walk-In Price: RM115
  • Warranty: 12 Months (T&C Apply)
  • Onboard LDO regulators for 2.8V and 1.8V
  • Single 3.3V power input
  • 2.54mm (0.1 inch) standard pin out
  • Open source project www.ArduCAM.com supported
RM110.00
  • Walk-In Price: RM57.5
  • Warranty: 12 Months (T&C Apply)
  • Output: DC 8.5V 1.5A
  • Interface: DC 2.1mm (Female/Male) (Arduino compatible)
  • Led Indicator: Red (charging), Green (charged), Green Flash (protection mode triggered)
  • Support Battery: 7.4V Lipo Battery (2-cell pack)
RM52.50
  • Walk-In Price: RM70
  • Warranty: 1 Month (T&C Apply)
  • Adopt optocoupler
  • 8 channel
  • Limit Conversion Frequency: 20KHz
  • Mounting bracket for DIN rail
  • It can be used for signal isolation
RM65.00
  • Walk-In Price: RM39
  • 8mm chromed smooth rod steel linear rail shaft for CNC 3D printer reprap.
  • The rod compatible with SC8UU linear slider and SK8 support frame(Only include rod).
  • The rod compatible with the LM8UU linear bearing and SK8 soupport frame(Only include rod).
RM35.00
  • Walk-In Price: RM9.5
  • Warranty: 1 Month (T&C Apply)
  • Compatibility: 4, 6 and 8 wire stepper motors of any voltage
  • Adjustable current control from 150mA/phase to 750mA/phase
  • Power Supply Range: 7V to 30V
  • The higher the voltage, the higher the torque at high speeds
RM8.50
  • Walk-In Price: RM4
  • Warranty: 12 Months (T&C Apply)
  • For the Xboard Relay and Romeo - an Arduino Robot Control Board
  • Transparent acrylic panels looks crystal clear and clean
  • Two different choise for different hobbies
  • Basic version is a atable base
  • Special version is more eye-catching
RM3.50
  • Walk-In Price: RM53.00
  • Warranty: 12 Months (T&C Apply)
  • A fully tested and assembled LED backpack
  • Ultra-bright 4-digit 0.56" tall white seven-segment display
  • 4-pin header
RM49.00