BREAKOUT BOARDS
- Simple step and direction control interface
- Six different step resolutions: full-step, half-step, 1/4-step, 1/8-step, 1/16-step, and 1/32-step
- Adjustable current control lets you set the maximum current output with a potentiometer, which lets you use voltages above your stepper motor rated voltage to achieve higher step rates
RM13.50
- Supply range: 2.0V - 5.5V
- Current consumption: Low
- Programmable data rate: 8SPS to 860SPS
- Battery monitoring: up to 125°C
- Specificed temperature: 40°C
- Jumpers Selectable: I2C 7-bit adresses
RM14.50
- Logic level shifter Bi-Directional with 4 channels between high logic voltage and low logic voltage
- Each level converter has the capability of converting 4 pins on the high side to 4 pins on the low side with two inputs and two outputs provided for each side
- This 4 channels bi-directional logic level converter is a small device that safely steps down 5V signals to 3.3V and steps up 3.3V to 5V at the same time
RM2.50
- This level shifter board combines the ease-of-use of the bi-directional TXB0108 with an I2C-compatible FET design following NXP's app note.
- This breakout has 4 BSS138 FETs with 10K pullups.
- It works down to 1.8V on the low side, and up to 10V on the high side.
RM25.00
- Working voltage: 3~5v
- I2C Digital-output of 6 or 9-axis MotionFusion data in rotation matrix, quaternion, Euler Angle, or raw data format
- Tri-Axis angular rate sensor (gyro) with a sensitivity up to 131 LSBs/dps and a full-scale range of ±250, ±500, ±1000, and ±2000dps
- Tri-Axis accelerometer with a programmable full scale range of ±2g, ±4g, ±8g and ±16g
RM45.00
- Solve the connection for 3.3V and 5V system
- Convert 5V to 3.3V & 3.3V to 5V at same time
- Able to work with 2.8V and 1.8V devices
- Conversion level range: 1.8V-6V
RM10.00
- This chip perform bidirectional level shifting from pretty much any voltage to any voltage
- It will auto-detect the direction
- Only thing that doesn't work well with this chip is i2c
RM49.00
- Absolute Orientation
- Absolute Orientation
- Angular Velocity Vector
- Acceleration Vector
- Magnetic Field Strength Vector
- Linear Acceleration Vector
RM199.00
- 8x8 Array of IR Thermal Sensors
- Temperatures Ranging: 0°C to 80°C
- Accuracy: +- 2.5°C (4.5°F)
- Maximum Frame Rate: 10Hz
RM220.00
- No Arduino or other microcontroller required! It is completely stand-alone, just needs a 3 to 5.5VDC battery
- Small - only 1.5" x 0.9"
- Built in storage - yep! you don't even need an SD card, there's 16MB of storage on the board itself
RM115.00
-
Bi-polar or uni-polar stepper with up to 1.2A per channel using the DRV8833
-
Size: 26mm x 18mm x 3mm / 1.0" x 0.7" x 0.1"
-
Weight: 1.5g
RM35.00
-
Extremely Accurate I²C-Integrated RTC/TCXO/Crystal
-
23mm x 17.6mm x 7.2mm / 0.9" x 0.7" x 0.28"
-
Weight: 2.1g
RM75.00
- ATmega32u4 @ 8MHz with 3.3V logic/power
- 3.3V regulator with 500mA peak current output
- USB native support, comes with USB bootloader and serial port debugging
- You also get tons of pins - 20 GPIO pins
- Hardware Serial, hardware I2C, hardware SPI support
RM145.00
- ATSAMD21G18 @ 48MHz with 3.3V logic/power
- 3.3V regulator with 500mA peak current outpu0t
- USB native support, comes with USB bootloader and serial port debugging
- You also get tons of pins - 20 GPIO pins
- Hardware Serial, hardware I2C, hardware SPI support
RM155.00
- Designed to make working with this chip super easy and a lot of fun.
- We took a certified module with an onboard antenna, and plenty of pins
- Soldered it onto our designed breakout PCBs
RM65.00
- MAX98357A
- Product Dimensions: 19.4mm x 17.8mm x 3.0mm
- Product Weight: 1.2g
RM39.00
- Comes assembled and tested
- Uses the 5V input via Micro-B USB connector on the Pro Trinket or ItsyBitsy
- For charging single Lithium Ion/Lithium Polymer 3.7/4.2v batteries (not for older 3.6/4.1v cells)
- 100mA charge current, adjustable to 500mA by soldering a jumper closed
RM29.00
- Output Power: 2.5W at 4Ω, 10% THD, 1.5W at 8Ω, 10% THD, with 5.5V Supply
- 50dB PSRR at 1KHz
- Filterless design, with ferrite bead + capacitors on output
RM29.00
- PCB & header are included
- Plugs into any breadboard, or you can use wires
- Two mounting holes
- Will keep time for 5 years or more
RM29.50
- It has a nice standard 0.1"x0.1" prototying grid with big pads
- Comes with Stacking headers and plain header, choose whichever you want when soldering together
- A IC pattern for adding DIP ICs up to 20 pins
- Power rails down the middle and sides
- A reset button and an extra general use button
RM55.00
- Packet radio with ready-to-go Arduino libraries
- Uses the amateur or license-free ISM band (ITU "Europe" license-free ISM or ITU "American" amateur with limitations)
- Use a simple wire antenna or spot for uFL or SMA radio connector
- SX1276 LoRa® based module with SPI interface
RM119.00
- With an ATmega328p chip or SAMD21 or even SAMD51
- This shield will make usage a snap
- Light soldering to attach the headers, connector and terminal block
- Able to attach any RGB matrix with ease
- This shield just takes care of the wiring for you
RM39.00
- Based on the best-of-class Si4713
- All-in-one stereo audio FM transmitter that can also transmit RDS/RBDS data
- Wire up to your favorite microcontroller to the I2C data lines
RM115.00
- Stand-alone breakout that will turn any electronics into low-power electronics
- Product Dimensions: 19.3mm x 18.0mm x 4.5mm / 0.8" x 0.7" x 0.2"
- Product Weight: 1.3g / 0.0oz
RM35.00
- High-precision and inexpensive MMA8451 Triple-Axis Accelerometer w/ 14-bit ADC
- Can detect motion, tilt and basic orientation with a digital accelerometer
- Great accelerometer to start
- Has a wide usage range, from +-2g up to +-8g yet is easy to use with Arduino or another microcontroller
RM45.00
- Internal temperature reading
- 3.3 to 5v power supply and logic level compliant!
- SPI data requires any 4 digital I/O pins
RM92.00
- Works with any K type thermocouple
- Will not work with any other kind of thermocouple other than K type
- Easy to use analog output
- Temp range with 5V power: -250°C to +750°C output
- Temp range with 3.3V power: -250°C to +410°C output
RM65.00
- Arduino compatible (recognized as an Arduino Leonardo in IDE)
- Atmel ATMega32U4 Microprocessor
- Freescale MPR121 dedicated touch interface
- VLSI VS1053B audio processor
- Arduino Shield Compatible (check pins available)
RM499.00
- Working voltage: 3.3V-5.5V
- 8 levels of brightness
- Size: 42*24*8mm/1.65*0.94*0.31 inches
RM32.00
RM40.00
- Bluetooth chip:TI CC2540
- Frequency: 2.4GHz
- Transfer rate: ≤1Mbps
- Modulation: GFSK, bluetooth low power, V4.0
- Power consumption: working:10.6mA average ,ready mode:8.7mA
- Sensitivity: -93dB
RM62.30
RM89.00