WaveShare
Refine Search
★ ARDUINO PRODUCT
★ RASPBERRY PI PRODUCT
- 800x480 hardware resolution
- Capacitive touch control
- Supports popular mini PCs such as Raspberry Pi, BB Black, as well as general desktop computers
- When works with Raspberry Pi, supports Raspbian/Ubuntu/Kali/Retropie/WIN10 IOT, driver free
RM216.00
- micro:bit edge connector, directly pluggable
- Embedded driver ST7735S, supports 65K colors
- Onboard SRAM 23LC1024, used as display cache, no more out of memory
- SPI interface, takes up only a few IO pins
- Backlight adjustment via PWM
RM59.00
- IPS screen,1280x800 hardware resolution
- Toughened glass capacitive touch panel, 6H hardness
RM530.00
- Driver: ST7735S
- Interface: SPI
- Display color: RGB, 65K color
- Resolution: 128x128
- Backlight: LED
- Operating voltage: 3.3V
RM50.00
- Plug & Play
- Easy to install
- Touch Screen
- Built-in Battery: 10,000mAh
- Free Protective Folio Cover Case
RM895.00
- No backlight, keeps displaying last content for a long time even when power down
- Ultra low power consumption, basically power is only required for refreshing
- Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano
RM79.00
- No backlight, keeps displaying last content for a long time even when power down
- Ultra low power consumption, basically power is only required for refreshing
- Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano
RM94.50
-
Operating voltage: 3.3V
-
Interface: 3-wire SPI, 4-wire SPI
-
Dot pitch: 0.138 × 0.138
-
Resolution: 200 × 200
-
Display color: Black & White
RM39.00
- Driver: ST7789
- Interface: SPI
- Display color: RGB, 65K color
- Resolution: 240x240
- Backlight: LED
- Operating voltage: 3.3V
RM39.50
- 4 USB Ports, compatible with USB2.0/1.1
- Onboard USB to UART, with enable / disable switch, convenient for Raspberry Pi serial debugging and avoiding conflict
- Onboard multi indicators, for monitoring the status of power, USB to UART, and each USB port
RM38.50
- Raspberry Pi connectivity, compatible with Raspberry Pi Zero/Zero W/Zero WH/2B/3B/3B+
- Supports dial-up, telephone call, SMS, MMS, mail, TCP, UDP, DTMF, HTTP, FTP, etc.
- Supports GPS, BeiDou, Glonass, LBS base station positioning
RM299.00
- Compatible with Arduino UNO, Leonardo, easy to connect with various Arduino shields
- XBee connector for connecting various XBee modules
- Sensor interface for connecting various sensors
- Onboard USB TO UART for serial port debugging, also can be configured as XBee USB adapter
RM85.00
- 5-ch infrared sensor, analog output, combined with PID algorithm, stable line tracking
- Onboard modules like line tracking, obstacle avoiding, needs no messy wiring
- TB6612FNG dual H-bridge motor driver, compared with L298P, it's more efficient, more compact, and less heating
RM250.00
- 5-ch infrared sensor, analog output, combined with PID algorithm, stable line tracking
- Onboard modules like line tracking, obstacle avoiding, needs no messy wiring
- TB6612FNG dual H-bridge motor driver, compared with L298P, it's more efficient, more compact, and less heating
RM345.00
- Cooling fan for Jetson Nano Developer Kit
- Connector: 4Pin Reverse Proof Connector
- Spec: 5V, PWM adjustment
RM15.00
- Breakout the I/O pins to 2.54mm pitch pinheaders for easy use
- Dimension: 82.05mm x 36.10mm
- Through holes diameter: 2mm
RM40.00
- Output voltage: 5V
- Applicable battery: 3.7V 14500 lithium battery (4.2V when full charged)
RM74.90
- Metal case for Jetson Nano Developer Kit
- Easy access to the peripheral connectors
- With camera holder, RESET and POWER buttons
RM69.50
- PL2303TA onboard (the latest device, compatible with PL2303HXA)
- Supports windows XP/7/8/8.1/10
- 3 power mode: 5V output, 3.3V output, or powered by target board (3.3V-5V)
- 3 LEDs: TXD LED, RXD LED, POWER LED
RM16.50
- Supports Raspberry Pi A+/B+/2B/3B/3B+
- High quality relays, loads up to 5A 250V AC or 5A 30V DC
- Photo coupling isolation, prevent interference from high voltage circuit
- Onboard LEDs for indicating relays status
RM80.00
- Operating voltage: 3.3V
- CAN controller: MCP2515
- CAN transceiver: SN65HVD230
- 485 transceiver: SP3485
RM49.00
- Arduino standard interfaces, compatible with Arduino boards like Arduino UNO, Leonardo, NUCLEO, XNUCLEO
- RS485 function, onboard transceiver SP3485/MAX3485, 3.3V power supply
- CAN function, onboard transceiver SN65HVD230, 3.3V power supply
RM59.00
- Power supply: 5V (Pi connector) OR 6V~12V (VIN terminal)
- Servo voltage: 5V
- Logic voltage: 3.3V
- Driver: PCA9685
RM50.00
- Waveshare CAN Board SN65HVD230
- Features an accessory onboard CAN transceiver
- Used to connect MCUs to the CAN network
- Powered from 3.3 V
- Provides ESD protection
RM21.50
- Onboard Hi-Fi chip NS8002
- Sound volume adjustment
- Earphone jack output
RM49.90
- Onboard ESP8266, supports Arduino development
- Provides HTML host code, allows to refresh display content via remote webpage, suit for Internet applications
- Supports Floyd-Steinberg dithering algorithm, more color combinations, better shadow rendering for the original image
RM59.00
- Ultraviolet Sensor
- Output voltage boosts along with the ambient ultraviolet intensity increases
- Onboard amplifier circuit with adjustable amplification factor
RM33.50