Boards
FREE SHIPPING to Peninsular Malaysia for orders over RM39.00
Boards
Sort by
Show result
  • Total of 400 tie in points
  • Standard 2.54mm spacing between two holes
  • Colour: White
  • With sticky foam at the bottom
  • 2 power buses, 30 columns and 10 rows
  • Can be extended by joining it to another breadboard
RM2.70
  • Connect to those pesky 0.5mm pitch connectors
  • Designed this for use in house
  • Quickly connect to 50pin 0.5mm pitch flex cables
RM17.00
  • 30 rows of double 5-hole rows
  • Dimensions: 78.88mm / 3.1" x 43.26mm / 1.7"
  • 1.2mm / 0.047" drill holes
RM44.90
  • Connect to 0.5mm, 1.0mm and even some 2.0mm pitch connectors that you may run across with an FPC stick. 
  • Designed this for use in house
  • Quickly connect to FPCs we need to test. 
RM13.00
  • 13 rows of 4-pin holes breaking out the GPIO cable, 1 row of double 4-pin and 14 rows of double 5-hole rows
  • 4 power rails with positive/negative markings
  • 3.3" x 2.0" (85mm x 55mm), 0.063" thick FR4
RM35.00
  • Work for some 2.0mm pitch connectors
  • Broken out to both a 2x20 0.1" spaced header as well as two strips of 20-pin long 0.1" spaced header 2.1" inches apart
  • Each order comes with a single-sided PCB plate no header or other connectors included
RM28.00
  • Measuring approx: 1" x 6"
  • Standard-thickness FR4
  • Gold plate ruler has the most common component packages you'll encounter
RM27.50
  • 15 rows of double 5-hole rows + 48 individual holes
  • 2 power rails with positive/negative markings
  • 2.1" x 1.3" (54mm x 33mm), 0.063" thick FR4
RM45.00
  • 13 rows of 4-pin holes breaking out the GPIO cable, 4 rows of double 4-pin hole rows
  • 4 power rails with positive/negative markings
  • 1.8" x 2.0" (46mm x 55mm), 0.063" thick FR4
RM29.00
  • Double Sided Copper Clad Plate Laminate
  • Grade A copper clad laminates
  • used by PCB fabricators and university research labs
RM13.00
  • Material: FR4 Glass Fiber
  • Surface Finish: Copper Clad
  • Layers: Single Sided
  • Size: 10x15cm
  • Thickness: 1.5mm
RM5.00
  • Model: GS1525
  • PCB Type: Positive Active Presensitized
  • Single Sided
RM39.50
  • High Sensitive photo resist coated
  • short exposing time
  • 60-90 second (UV Light)
  • 7-10min (Fluorescent/CF lamp)
  • color varied after exposure
  • Paper Phenolic Single Sided
RM14.00
  • Model: PP1525
  • PCB Type: Positive Active Presensitized
  • Single Sided
RM24.50
  • Model: PP1530
  • PCB Type: Positive Active Presensitized
  • Single Sided
RM30.00
  • Total tie-point: 830 points
  • Terminal strips, tie-point 630
  • Distribution strips, tie-point 200
  • Wire size: Suitable for 29-20 AWG wires
RM3.90
  • 170 Tie Point Breadboard
  • With Adhesive
  • ABS plastic
RM1.80
  • 170 Tie Point Breadboard
  • With Adhesive
  • ABS plastic
RM1.80
  • 170 Tie Point Breadboard
  • With Adhesive
  • ABS plastic
RM1.80
  • 170 Tie Point Breadboard
  • With Adhesive
  • ABS plastic
RM1.80
  • 170 Tie Point Breadboard
  • With Adhesive
  • ABS plastic
RM2.00
  • 170 Tie Point Breadboard
  • With Adhesive
  • ABS plastic
RM1.80
  • 170 Tie Point Breadboard
  • With Adhesive
  • ABS plastic
RM1.80
  • 840 tie points
  • Round hole designed for easy plug and pull
  • Expandable by combining several boards together to meet your different requirement
  • Wear proof material made of ABS & phosphor bronze with good flexibility and electric conductivity
  • Self-adhesive pad on rear
RM28.00
  • The edge plate can easy fold up (Convenience for work).
  • 1580 tie points.
  • Round hole designed for easy plug and pull.
  • Expandable by combining several boards together to meet the user different requirement.
  • Wearproof material made of ABS & phosphor bronze with good flexibility and electric conductivity.
RM73.50
  • SOP8/SOP16/SOP28 to DIP16/DIP28 Adapter Board
  • Can change the SOP8/SOP16/SOP28 to DIP16/DIP28 packaging
  • So that needn't to buy the DIP chips for prototyping specially
RM4.90
  • Single-sided solderable prototype PCB
  • 2.54mm standard pin spacing fits for most electronic components
  • Size: 10 x 22 cm
RM5.00
  • Soft thin protoboard
  • Soldered DIP and SMD components
  • Can be appropriate bending
  • Making circuit experiments and design more convenient and fast
RM59.50
  • Material: Paper Phenolic
  • Hole Pitch: Standard 2.54mm
  • Hole Diameter: Dia 1mm
  • Dimension: 10cm x 24.5cm
  • Thickness: 1.5mm
RM4.50
  • Material: Paper Phenolic
  • Hole Pitch: Standard 2.54mm
  • Hole Diameter: Dia 1mm
  • Dimension: 6.5cm x 14.5cm
  • Thickness: 1.2mm
RM2.00